EVGA

new x99 classified build

Page: < 12 Showing page 2 of 2
Author
_JamesR
EVGA Alumni
  • Total Posts : 253
  • Reward points : 0
  • Joined: 2014/06/01 07:01:44
  • Status: offline
  • Ribbons : 0
Re: new x99 classified build 2015/06/15 04:56:14 (permalink)
Looks great so far, keep us posted.

EVGA Z97 Classified w/ i7 4790 | 32GB Crucial Ballistix Elite | 2x EVGA GTX 980 Ti ACX 2.0 | EVGA 1000w G2 | Samsung EVO 840 120GB | Samsung 850 EVO 250GB | Seagate 3TB | 3x WD 2TB (Raid-5) | Corsair H100i GTX | 3x Asus VS278P-Q 27" 1080p 1ms GTG monitor (surround) | 1 Monoprice 28" 4K 5ms GTG (accessory)
#31
sam nelson
iCX Member
  • Total Posts : 365
  • Reward points : 0
  • Joined: 2014/01/06 21:07:07
  • Status: offline
  • Ribbons : 9
Re: new x99 classified build 2015/06/15 08:01:32 (permalink)
ty all everyone being nice new to the thread not sure anyone would like it lol there are some great builds here much finer than mine .so ty all again and for the help and very thanks to evga tech and bill
post edited by sam nelson - 2015/06/15 08:21:02
#32
Vlada011
Omnipotent Enthusiast
  • Total Posts : 10257
  • Reward points : 0
  • Joined: 2012/03/25 00:14:05
  • Location: Belgrade-Serbia
  • Status: offline
  • Ribbons : 11
Re: new x99 classified build 2015/06/15 08:06:14 (permalink)
This build look great, one of best rig here.
I like everything, Caselabs case and hardware inside is perfect.
You have 1200 P2 same as me. 

i7-5820K 4.5GHz/RVE10-EK Monoblock/Dominator Platinum 2666/ASUS GTX1080Ti Poseidon/SBZxR /Samsung 970 EVO PLus 1TB/850 EVO 1TB /EVGA 1200P2/Lian Li PC-O11WXC/EK XRES D5 Revo 100 Glass/Coolstream PE360-Noctua NF-A12x25 PWM x3
http://www.evga.com
http://www.intel.com
http://www.nvidia.com
https://watercool.de
http://www.lian-li.com
https://www.youtube.com/watch?v=PHMun5xiRe0
 
https://xdevs.com/guide/2080ti_kpe/#intro
https://www.evga.com/articles/01386/evga-sr-3-dark/
 
 
 

 
 
#33
sam nelson
iCX Member
  • Total Posts : 365
  • Reward points : 0
  • Joined: 2014/01/06 21:07:07
  • Status: offline
  • Ribbons : 9
Re: new x99 classified build 2015/06/15 08:26:40 (permalink)
ty yes i have 2 power supplies in the build . 1600 is for titans and 1200 for the rest . but the one thing i not said much on is that i put in my self 80 feet on conduit so i could put in 2 220 lines for power supplies and 4 120's for the rest all to the box so clean power should not  be a problem for it  i hope.
#34
sam nelson
iCX Member
  • Total Posts : 365
  • Reward points : 0
  • Joined: 2014/01/06 21:07:07
  • Status: offline
  • Ribbons : 9
Re: new x99 classified build 2015/06/16 21:13:00 (permalink)
this is a few pics of the circits i put in just for this build it took 90 nfeet of 1inch conduit to put 2 220volt lines and 4 120volt line . that is part of why it takeing so long to build 
going to run power sup. on 220 and every thing eles on 110. so realy this is part of the build even if its not in the computer dont you all think so?.

Attached Image(s)

#35
VGAMASTER198
Superclocked Member
  • Total Posts : 206
  • Reward points : 0
  • Joined: 2015/06/10 14:10:49
  • Location: CLASSIFIED
  • Status: offline
  • Ribbons : 0
Re: new x99 classified build 2015/06/17 03:27:07 (permalink)
Nice build :)

    "Like car accidents, most hardware problems are due to driver error."
 
 
 
#36
sam nelson
iCX Member
  • Total Posts : 365
  • Reward points : 0
  • Joined: 2014/01/06 21:07:07
  • Status: offline
  • Ribbons : 9
Re: new x99 classified build 2015/06/17 05:01:20 (permalink)
ty very much
#37
sam nelson
iCX Member
  • Total Posts : 365
  • Reward points : 0
  • Joined: 2014/01/06 21:07:07
  • Status: offline
  • Ribbons : 9
Re: new x99 classified build 2015/06/18 16:48:57 (permalink)
hopeing some of my back ordered parts will be comeing in soon and that i can get my rad mounts ordered this week. need to get 4 480 mounts and 0ne 280 flex bay mount
#38
sam nelson
iCX Member
  • Total Posts : 365
  • Reward points : 0
  • Joined: 2014/01/06 21:07:07
  • Status: offline
  • Ribbons : 9
Re: new x99 classified build 2015/06/20 11:46:34 (permalink)
hi all . here's a update on part's for the build lol a few parts at a time :0( wish i could just get it all at same time. i just ordered the rest of the parts i needed from caselab's 4 480 rad and fan side mounts and 1 flexbay 280 rad and fan mount. so i been working on my build log parts list to date , so i thoght i would share the full list with u all .
primary is evga  x99 classified mb
               intel   i7 5960x
               Gskill  3000 32g (8by4)
               evga   titan black hydro copper sig
and the rest
              
1. MonitorAsus3 of: ASUS ROG PG278Q Black 27" 1ms(GTG) Widescreen WQHD LED Backlight LCD G-SYNC 3D Monitor , Gaming Hotkeys, 6mm Slim Bezel 350 cd/m2 1,000:1   
2. Accessory EVGA Pro SLI Bridge V2 (4-Way)100-4W-0042-LR
3. Accessory EVGA G2/P2/T2 Red Power Supply Cable Set (Indivi(2) 100-CR-1300-B9 (Red)
4. Accessory Single Braid ATX 24pin to ATX 20+4pin to ATX 24pinCPA-167BKS
5. Power Supply EVGA SuperNOVA220-P2-1600-X1
6. Power Supply EVGA SuperNOVA220-P2-1200-X1
7. Solid State DrivePlextorM6e PX-G256M6e M.2 2280 256GB PCI-Express 2.0 x2
8. Solid State Drive SAMSUNG(4) 850 Pro Series MZ-7KE256BW 2.5" 256GB
9. Case Caselab magnum sth10
10. Case Caselab(4) 120.4 (480) Radiator Side Mount - Single Wide Magnum Cases
11. Case Caselab(1) Flex-Bay 140.2 (280) Fan/Radiator Mount
12. Cooling nateman_doo custom wbVreg block
13. Cooling nateman_doo custom wbchipset block
14. Cooling ek wb (4)EK 780/Titan SE/780 Ti Backplate - Red
15. Cooling ek wb (4)compatible VGA Liquid Cooling Block-Nickel+Acetal(EK-FC780 GTX TI-Acel+Nickel)) to replace the hydro copper stock wb
16. Cooling ek wb(EK Terminal Block - Quad Parallel - Black Acetal (EK-FC Terminal QUAD Semi-Parallel
17. Cooling ek wbEK Supremacy EVO Universal CPU Liquid Cooling Block - Acetal (EK-Supremacy EVO - Acetal)
18. Cooling ek wb (4)EK RAM Monarch DIMM Module - 2 Pack - Black (EK-RAM Monarch Module - Black (2pcs))
19. Cooling ek wb(2) (EK Monarch Series X4 Ram Liquid Cooling Block - Acetal Clean CSQ (EK-RAM Monarch X4 Clean CSQ - Acetal))
20. Cooling SwiftechSwiftech MCP655-PWM x 4 and 4x Mod Kit - Red))
21. Cooling BitspowerBitspower G 1/4 Thread Dual D5 Mod Top - Acrylic Version (BP-2D5TOPAC-BK
22. Cooling Bitspower(10) Bitspower Dual IG1/4" Matte Black Rotary Mini Snake-Style Adapter BP-MBMSR
23. Cooling Bitspower(6) G1/4 Matte Black Triple Rotary 90-Degree Compression Fitting-ID 3/8" OD 1/2" - V3
24. Cooling Black Ice®(1) GTX Gen Two Xtreme 140 Highest Performance Radiator
25. Cooling Monsoon(2 set's of 6)Monsoon Free Center Compression Fittings, 3/8" x 1/2" Six Pack - Matte Black MON-FC-3812-6-MB
26. Cooling PrimoFlex(1)PrimoFlex Advanced LRT 10ft Tubing - 3/8in. ID X 1/2in. OD - Crystal Clear PFLEXA10-12
27. Fan Aerocool(1) Shark Series 140mm Red Edition High Air Pressure Fan
28. Accessory CableMod Cable Combs (4-28 Slot) - RedCM-CC-RD-CM-C26
29. Accessory CableMod Cable Combs (4-28 Slot) - RedCM-CC-RD-CM-C86
30. Heatsink Arctic Silver 5( Arctic Silver 5 (High-Density Silver Thermal Compound) - 12 Grams (AS5-12G)) for the Vreg and Chipset
31. Heatsink FujipolyFujipoly / ModRight Extreme Thermal Pad Blister Pack - Mosfet Block - 100 x 15 x 1.0 - Thermal Conductivity 11.0 W/mK)
 
 
 
hope all like it

 
post edited by sam nelson - 2015/06/20 12:09:16

Attached Image(s)

#39
Devileytion
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2011/06/14 10:35:35
  • Status: offline
  • Ribbons : 0
Re: new x99 classified build 2015/06/21 09:53:52 (permalink)
So far, so good!
Best of the BESTS!
#40
sam nelson
iCX Member
  • Total Posts : 365
  • Reward points : 0
  • Joined: 2014/01/06 21:07:07
  • Status: offline
  • Ribbons : 9
Re: new x99 classified build 2015/07/01 15:52:48 (permalink)
just a small update on parts i just got in my 4 480 side mount's and a 280 flexbay fan and rad mount. install the flexbay and the front rad but still wateing on some fittings to come in
  • 4 x 120.4 (480) Radiator Side Mount - Single Wide Magnum Cases

  • 1 x Flex-Bay 140.2 (280) Fan/Radiator Mount

  • #41
    sam nelson
    iCX Member
    • Total Posts : 365
    • Reward points : 0
    • Joined: 2014/01/06 21:07:07
    • Status: offline
    • Ribbons : 9
    Re: new x99 classified build 2015/07/04 14:09:10 (permalink)
    fast and  small update on my build log, been working on cooling system, and  here is a few new picks of it still have some of my fitting back ordered .but this will give some what of a look at what i am trying to do .

    Attached Image(s)

    #42
    Vlada011
    Omnipotent Enthusiast
    • Total Posts : 10257
    • Reward points : 0
    • Joined: 2012/03/25 00:14:05
    • Location: Belgrade-Serbia
    • Status: offline
    • Ribbons : 11
    Re: new x99 classified build 2015/07/05 01:00:52 (permalink)
    What you do with so nice and beautiful hardware?
    Games mostly or for job, for entertainment...? 
    EVGA Motherboards are always recognizable with 24pin angled.
    Excellent because you choose Caselabs... I think every RIG with 2-3 premium graphic card should be build in Caselabs.
    Not 3x TITAN X in Obsidian 750D. If you pay 3000$ for graphics pay 350 for full aluminum Made in USA case, as real patriot. 
    That's one of very rear thing in PC Industry where customers could say this is completely build in USA from best materials.
    Why real enthusiast to pay 70-80$ less than Caselabs for thin steal from China and big serial production.
     
     

    i7-5820K 4.5GHz/RVE10-EK Monoblock/Dominator Platinum 2666/ASUS GTX1080Ti Poseidon/SBZxR /Samsung 970 EVO PLus 1TB/850 EVO 1TB /EVGA 1200P2/Lian Li PC-O11WXC/EK XRES D5 Revo 100 Glass/Coolstream PE360-Noctua NF-A12x25 PWM x3
    http://www.evga.com
    http://www.intel.com
    http://www.nvidia.com
    https://watercool.de
    http://www.lian-li.com
    https://www.youtube.com/watch?v=PHMun5xiRe0
     
    https://xdevs.com/guide/2080ti_kpe/#intro
    https://www.evga.com/articles/01386/evga-sr-3-dark/
     
     
     

     
     
    #43
    Pgcmoore
    CLASSIFIED Member
    • Total Posts : 2037
    • Reward points : 0
    • Joined: 2011/03/27 09:29:41
    • Location: Florida
    • Status: offline
    • Ribbons : 14
    Re: new x99 classified build 2015/07/05 05:33:33 (permalink)
    Nice build sam nelson, I myself have been contemplating a Caselabs for my next project. The more of them I see, the more I lean that way. Even started a custom parts list for an S8S and realized I need to know where to go before buying a ticket. So many options but so nice to build into a platform that is ready rather than modifying one to fit your needs. Congratulations! Looks to become a build that should last you a very, very long time. And thank you for sharing. Nice work on the electrical upgrades too. Good thinking, and definitely part of the build.
    Great job!


       "This program has performed an illegal operation and will be shut down"    
                                  
                            My Affiliate Code is  05G-UGD-GZVU
     
    #44
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 102278
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Netherlands
    • Status: offline
    • Ribbons : 84
    Re: new x99 classified build 2015/07/05 22:46:38 (permalink)
    Very nice! Looking forward to final pics after you receive the fittings.

    AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

    #45
    sam nelson
    iCX Member
    • Total Posts : 365
    • Reward points : 0
    • Joined: 2014/01/06 21:07:07
    • Status: offline
    • Ribbons : 9
    Re: new x99 classified build 2015/08/02 12:44:30 (permalink)
    well heres a small up date on my build finaly got some more parts for it so here it  goes .
    1: 2each   (Bitspower Water Tank Z-Tube 250mm - Acrylic )
    2: 8each   (Bitspower Case Top Water Fill/ Through Hole Fitting Set - Matte Black Finish )
    3: 4each   (Bitspower D5 / MCP655 Mod Kit - Abrasive Red Finish)
    4: 2each   (Black Ice Nemesis L-Series 480 Xtreme Radiator)
    5: 2each   (Black Ice Nemesis L-Series 360 Xtreme Radiator)
    6: 4each   (Aquacomputer D5 Pump Motor with PWM Input and Speed signal)
    7: 14each (Aerocool Shark Series 120mm Red Edition High Air Pressure Fan)
    8: 1each   (Aerocool Shark Series 140mm Red Edition High Air Pressure Fan)
    9: 1each   (Bitspower BP-MVV-MBK Mini-Valve - Matte Black)
    10: 2each (Bitspower Mini Dual G1/4" High Flow Fitting - Black Matte Finish)
    11: 2each (Bitspower Premium PLUS Black Diamond Series G1/4" Stop Fitting with O-ring)
    12: 1each (Monsoon Silver Bullet Antimicrobial G1/4 Plug - Black Chrome)
    13: 1each (Enzotech G1/4" BCPB-T Block - Matte Black)
    14: 1each (Lamptron CW611 36W - 6 Channel Aluminum Liquid Cooling Controller - Black)
    15: 1each (Koolance INS-FM17N Coolant Flow Meter)
    and i have about half these things installed have a few new picks.

     
    post edited by sam nelson - 2015/08/02 12:49:51

    Attached Image(s)

    #46
    Pgcmoore
    CLASSIFIED Member
    • Total Posts : 2037
    • Reward points : 0
    • Joined: 2011/03/27 09:29:41
    • Location: Florida
    • Status: offline
    • Ribbons : 14
    Re: new x99 classified build 2015/08/02 13:00:40 (permalink)
    looking very nice, love the red, transparent red look to the parts, the Aero Shark fans really set that off! I have a few of them myself, look great when lit up!
     
    Great Job!

     

       "This program has performed an illegal operation and will be shut down"    
                                  
                            My Affiliate Code is  05G-UGD-GZVU
     
    #47
    sam nelson
    iCX Member
    • Total Posts : 365
    • Reward points : 0
    • Joined: 2014/01/06 21:07:07
    • Status: offline
    • Ribbons : 9
    Re: new x99 classified build 2015/08/02 13:14:50 (permalink)
    o lol been working on cable manage ment some on the top but not the bottom yet . this is a big case but it's starting to get tight :O( lol but out of monny again for a while only need some more tybeing and a buch of fittings .ans a few bluray drives and it be time to power it up .
    #48
    Pgcmoore
    CLASSIFIED Member
    • Total Posts : 2037
    • Reward points : 0
    • Joined: 2011/03/27 09:29:41
    • Location: Florida
    • Status: offline
    • Ribbons : 14
    Re: new x99 classified build 2015/08/02 13:28:35 (permalink)
    LOL, I bet she's getting heavy too

       "This program has performed an illegal operation and will be shut down"    
                                  
                            My Affiliate Code is  05G-UGD-GZVU
     
    #49
    XrayMan
    Insert Custom Title Here
    • Total Posts : 73000
    • Reward points : 0
    • Joined: 2006/12/14 22:10:06
    • Location: Santa Clarita, Ca.
    • Status: offline
    • Ribbons : 115
    Re: new x99 classified build 2015/08/12 10:37:57 (permalink)
    Looks sweet.     

                My Affiliate Code: 8WEQVXMCJL
     
            Associate Code: VHKH33QN4W77V6A
     
                 
     
     
                      
     
     
     
              
     
       
     
               
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     



     
     
     
     
     
     &nbsp
    #50
    sam nelson
    iCX Member
    • Total Posts : 365
    • Reward points : 0
    • Joined: 2014/01/06 21:07:07
    • Status: offline
    • Ribbons : 9
    Re: new x99 classified build 2015/12/27 20:11:46 (permalink)
    hi all been a while and had some family things going on but finaly back and time to go back to work on the reg just got my 2 opic. drives and 2 sshd drive for back up and lol i got win 10 for operating system . only need about 500$ more in water cooling parts and a keyboard and mouse headset and speakers and i will finaly bring it on line lol . allmosat 2 years to build this reg lol
    #51
    LCRava
    FTW Member
    • Total Posts : 1059
    • Reward points : 0
    • Joined: 2005/10/23 14:23:52
    • Status: offline
    • Ribbons : 8
    Re: new x99 classified build 2015/12/28 08:12:23 (permalink)
    Great build Sam. Good choice on the parts. Couple of questions:
     
    How are you connecting both PSUs so they work in tandem?
     
    How are you liking the CaseLabs case ( I am waiting for a Mercury S8 myself).

    MY AFFILIATE CODE: X6EXZ64PSH  
     
    "I don't always GAME in 4K, but when I do, I prefer 4 TITANS"

    #52
    sam nelson
    iCX Member
    • Total Posts : 365
    • Reward points : 0
    • Joined: 2014/01/06 21:07:07
    • Status: offline
    • Ribbons : 9
    Re: new x99 classified build 2015/12/29 16:28:57 (permalink)
    i'm useing a jumper cable to trun them both on the same time. the 1600p is just for the titan's and the pumps for the titans the 1200 p is for thge rest of the reg. and i love the caselab case and i'm allmost finshed . the case is right at 100 pounds now lol
    #53
    LCRava
    FTW Member
    • Total Posts : 1059
    • Reward points : 0
    • Joined: 2005/10/23 14:23:52
    • Status: offline
    • Ribbons : 8
    Re: new x99 classified build 2016/01/09 00:17:13 (permalink)
    sam nelson
    i'm useing a jumper cable to trun them both on the same time. the 1600p is just for the titan's and the pumps for the titans the 1200 p is for thge rest of the reg. and i love the caselab case and i'm allmost finshed . the case is right at 100 pounds now lol


    I'm glad to hear you like the case. I had a Mountain Mods before and I am moving to Caselabs. I used the Bitspower X-Power for Dual PSU with great results (I was using 2x Corsair AXi PSUs and they did not wanted to work with the jumper cable at all).

    Either way, congrats on the sick build.

    MY AFFILIATE CODE: X6EXZ64PSH  
     
    "I don't always GAME in 4K, but when I do, I prefer 4 TITANS"

    #54
    sam nelson
    iCX Member
    • Total Posts : 365
    • Reward points : 0
    • Joined: 2014/01/06 21:07:07
    • Status: offline
    • Ribbons : 9
    Re: new x99 classified build 2016/01/24 17:53:37 (permalink)
    hi everyone finaly got to order ' what i think is all the part's i need to finsh the build and have redone the part list for the build . this should be it all . think i'm about 3 weeks from benchmarking 
    EVGA x99Classified
    Intel I7 5960x
    Gskill 3000 32g(8by4)
    EVGA  (4) of  Titan Black Hydro copper Sig

     
    1. Accessory Microsoft Windows 10 ProFull Version (32 & 64-bit)/USB Flash Drive 
    2. Monitor Asus  (3) of: ASUS ROG PG278Q Black 27" 1ms(GTG) Widescreen WQHD LED Backlight LCD G-SYNC 3D Monitor , Gaming Hotkeys, 6mm Slim Bezel 350 cd/m2 1,000:1  
    3. Accessory EVGA Pro SLI Bridge V2 (4-Way)100-4W-0042-LR  
    4. Accessory EVGA G2/P2/T2 Red Power Supply Cable Set (Indivi(2) 100-CR-1300-B9 (Red)   
    5. Accessory Single Braid ATX 24pin to ATX 20+4pin to ATX 24pinCPA-167BKS   
    6. Power Supply EVGA SuperNOVA220-P2-1600-X1   
    7. Power Supply EVGA SuperNOVA220-P2-1200-X1   
    8. Solid State Drive PlextorM6e PX-G256M6e M.2 2280 256GB PCI-Express 2.0 x2   
    9. Solid State Drive SAMSUNG  (4) 850 Pro Series MZ-7KE256BW 2.5" 256GB   
    10. Hard Drive Seagate Hybrid Drive  (2) ST1000DX001 1TB MLC/8GB 64MB Cache SATA 6.0Gb/s NCQ 3.5" Desktop SSHD   
    11. CD/DVD Pioneer Black  (2) 16X BD-RE 16X DVD+R 12X BD-ROM 4MB Cache SATA Blu-ray Burner BDR-209DBK   
    12. Case Caselab magnum sth10   
    13. Case Caselab  (4) 120.4 (480) Radiator Side Mount - Single Wide Magnum Cases   
    14. Case Caselab  (1) Flex-Bay 140.2 (280) Fan/Radiator Mount   
    15. Cooling nateman_doo custom wbVreg block   
    16. Cooling nateman_doo custom wbchipset block   
    17. Cooling ek wb   (4)EK 780/Titan SE/780 Ti Backplate - Red   
    18. Cooling ek wb   (4)compatible VGA Liquid Cooling Block-Nickel+Acetal(EK-FC780 GTX TI-Acel+Nickel)) to replace the hydro copper stock wb   
    19. Cooling ek wb  (EK Terminal Block - Quad Parallel - Black Acetal (EK-FC Terminal QUAD Semi-Parallel   
    20. Cooling ek wb  EK Supremacy EVO Universal CPU Liquid Cooling Block - Acetal (EK-Supremacy EVO - Acetal)   
    21. Cooling ek wb  (4)EK RAM Monarch DIMM Module - 2 Pack - Black (EK-RAM Monarch Module - Black (2pcs))   
    22. Cooling ek wb  (2) (EK Monarch Series X4 Ram Liquid Cooling Block - Acetal Clean CSQ (EK-RAM Monarch X4 Clean CSQ - Acetal))   
    23. Cooling Aquacomputer D5  (4) D5Pump Motor with PWM input and Speed Signal AQ-41105   
    24. Cooling Bitspower  (4) D5/MCP655 Mod Kit-Abrasive Red Finish BP-D5MA-ARD   
    25. Cooling Bitspower  (2) Bitspower G 1/4 Thread Dual D5 Mod Top - Acrylic Version (BP-2D5TOPAC-BK)   
    26. Cooling bitspower  (2) Bitspower Water Tank Z-Tube 250mm - Acrylic   
    27. Cooling Black Ice®  (2) Nemesis L-Series 480 Xtreme Radiator NEMESIS LX-480   
    28. Cooling Black Ice®  (2) Nemesis L-Series 360 Xtreme Radiator NEMESIS LX-360   
    29. Cooling Black Ice®  (1) GTX Gen Two Xtreme 140 Highest Performance Radiator   
    30. Fan Aerocool  (14) Shark Series 120mm Red Edition High Air Pressure Fan   
    31. Fan Aerocool  (2) Shark Series 140mm Red Edition High Air Pressure Fan   
    32. Accessory  Lamptron  (1) CW611 36W - 6 Channel Aluminum Liquid Cooling Controller - Black   
    33. Cooling  Koolance  (2) INS-FM17N Coolant Flow Meter   
    34. Accessory  Swiftech  (2) 8-Way PWM Splitter Box-SATA 8W-PWM-SPL-ST   
    35. Cooling  PrimoFlex  (3)PrimoFlex Advanced LRT 10ft Tubing - 3/8in. ID X 1/2in. OD - Crystal Clear PFLEXA10-12   
    36. Cooling  Mayhems  (4) Aurora 2 C0ncentrate - 250ml-red MD-AUR2-CON-RD   
    37. Cooling  Monsoon  (8) ( set's of 6)Monsoon Free Center Compression Fittings, 3/8" x 1/2" Six Pack - Matte Black MON-FC-3812-6-MB   
    38. Cooling  Bitspower  (6) G1/4 Matte Black Triple Rotary 90-Degree Compression Fitting-ID 3/8" OD 1/2" - V3   
    39. Cooling  Bitspower  (13) Case Top Water Fill/ Through Hole Fitting Set - Matte Black Finish   
    40. Cooling  Bitspower  (2) BP-MVV-MBK Mini-Valve - Matte Black Finish   
    41. Cooling  Bitspower  (4) Premium PLUS Black Diamond Series G1/4" Stop Fitting with O-ring   
    42. Cooling  Bitspower  (2) Mini Dual G1/4" High Flow Fitting - Black Matte Finish   
    43. Cooling  Bitspower  (13) Bitspower Dual IG1/4" Matte Black Rotary Mini Snake-Style Adapter BP-MBMSR   
    44. Cooling  Enzotech  (4) G1/4" BCPB-T Block-Matte Black BCPB-T   
    45. Cooling  Phobya  (2) Double Nipple G1/4 Outer to G1/4 Revolvable-Matte Black PH-84279   
    46. Heatsink  Arctic Silver 5( Arctic Silver 5 (High-Density Silver Thermal Compound) - 12 Grams (AS5-12G)) for the Vreg and Chipset   
    47. Heatsink  FujipolyFujipoly / ModRight Extreme Thermal Pad Blister Pack - Mosfet Block - 100 x 15 x 1.0 - Thermal Conductivity 11.0 W/mK)   



     

    post edited by sam nelson - 2016/01/24 18:19:46
    #55
    CableMod
    New Member
    • Total Posts : 24
    • Reward points : 0
    • Joined: 2016/01/25 15:31:23
    • Status: offline
    • Ribbons : 0
    Re: new x99 classified build 2016/01/25 16:28:41 (permalink)
    nice build !
    #56
    Page: < 12 Showing page 2 of 2
    Jump to:
  • Back to Mobile