the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 14:45:17
(permalink)
I know they need to stay cool. At that time, 61c maximum with fans running at 75% constant. I want the Waterblock on there, and now I am considering hitting them with a Drexel and the man some polish. I have the case rebuilt, minus the radiator and tubing, and need to get the cards ready asap. I am going to call Walmart (don't like that place) and see if they have any dry ice... The only thing that gets me with the artifact in is that it is stock clocks. I have never had a bsod on the 3960x, and I was getting them all morning today, system was shut down last night, not left on. I removed one of the cards, since I only had two in, and haven't had a bsod since. All on stock clocks.
post edited by Scarlet-Tech - 2015/04/25 14:48:14
|
Malarapvp
New Member
- Total Posts : 27
- Reward points : 0
- Joined: 2014/01/26 16:16:44
- Location: California
- Status: offline
- Ribbons : 1
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 15:40:10
(permalink)
Just got mine in the mail and then jump on the forums to see this. *sigh sad face
|
acebound
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2008/08/09 18:10:02
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 16:44:33
(permalink)
Hi all Grrrrr my block is in Louisville, KY. No weekend fun for me   So we have issues with our new water block I see. I will fix that with my height gage scriber and a drill bit! Will post pics and results next week sometime. @antandbetty...hey not sure on the screw size needed for the back plate yet, I pick them up at a local hardware will give info when I do. @ssiperko1 and nycx360 show us some results 
Cooler Master Cosmos ll - EVGA Z270 Classified - i7-7700k @4.8 MHz 1.20v- Corsair H115i - Corsair Vengeance LPX DDR4 3200 16GB - EVGA GTX980K|NGP|N / SLI @1550 Core 8000 Mem - Samsung NVMe SSD 960 EVO 500GB - Samaung SSD 840 PRO 256GB - WD 500GB Velociraptor - EVGA SuperNOVA 1300W G2 - Windows 10 Pro - Acer Predator XB1 27" 165Hz
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 17:41:25
(permalink)
Just took a Dremel to them... Will post pictures when I get home.
|
antandbetty
iCX Member
- Total Posts : 318
- Reward points : 0
- Joined: 2014/12/01 19:13:42
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 17:57:08
(permalink)
Am i the only nut here how does not want to mod a brand new block? I would love to see what it looks like when finished and if you guys can make that type of material look new again afterwards.......I will mod the block if EK gives me some of my money back....otherwise they can shove it where the sun doesn't shine...... 
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free" R.R.
|
acebound
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2008/08/09 18:10:02
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 18:13:04
(permalink)
Cooler Master Cosmos ll - EVGA Z270 Classified - i7-7700k @4.8 MHz 1.20v- Corsair H115i - Corsair Vengeance LPX DDR4 3200 16GB - EVGA GTX980K|NGP|N / SLI @1550 Core 8000 Mem - Samsung NVMe SSD 960 EVO 500GB - Samaung SSD 840 PRO 256GB - WD 500GB Velociraptor - EVGA SuperNOVA 1300W G2 - Windows 10 Pro - Acer Predator XB1 27" 165Hz
|
acebound
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2008/08/09 18:10:02
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 18:15:11
(permalink)
Scarlet-Tech
Just took a Dremel to them... Will post pictures when I get home.
 Now that's the spirit!...When in doubt break the Dremel tool out Haha Cheers 
Cooler Master Cosmos ll - EVGA Z270 Classified - i7-7700k @4.8 MHz 1.20v- Corsair H115i - Corsair Vengeance LPX DDR4 3200 16GB - EVGA GTX980K|NGP|N / SLI @1550 Core 8000 Mem - Samsung NVMe SSD 960 EVO 500GB - Samaung SSD 840 PRO 256GB - WD 500GB Velociraptor - EVGA SuperNOVA 1300W G2 - Windows 10 Pro - Acer Predator XB1 27" 165Hz
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 18:23:14
(permalink)
I have been sitting in a build log, due to the move, for over 6 months now. Patience is gone and I want to start updating it.
|
ssiperko1
Superclocked Member
- Total Posts : 195
- Reward points : 0
- Joined: 2012/07/10 16:53:29
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 18:29:35
(permalink)
acebound
So we have issues with our new water block I see. I will fix that with my height gage scriber and a drill bit! Will post pics and results next week sometime. @antandbetty...hey not sure on the screw size needed for the back plate yet, I pick them up at a local hardware will give info when I do. @ssiperko1 and nycx360 show us some results
I'd love to but alas I don't have the fittings I thought I did. :DOH: I did do this earlier with the kpex4pc bios on my 71 ASIC card. .jpg) IF anyone wants to swap a 71 ASIC for a 67 ASIC card I'm yer huckleberry. SS
Attached Image(s)
Z97 Classified 4790k at 49 core/44 ring 1.290v/1.20v EKWB X360 kit +XTX240&XTX360 with 20 Mass Cool fans Lamptron FC5 Fan Controller V3 32 GB G.Skillz at 2400 10-11-11-24-1T 2x 1TB EVO 840 2 TB Hybrid Seagate hd ASUS Blu-Ray RW EVGA Titan X SC under EK block/BP EVGA 1200 P2 ps with green CableMod sleeved cables Caselabs Mercury S8 case Acer XB270HU 1440 g-sync monitor Klipsch 2.1 Pro Media Speakers Razer Tiamat 7.1 headphones Razer Death Adder mouse Razer Black Widow Ultimate keyboard MadCatz Panther XL usb modded gaming joystick Win 7 Pro/Win 8.1 dual boot I'm not here for a long time, I'm here for a good time.
|
nycx360
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 2009/08/23 14:46:09
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 18:37:49
(permalink)
I have mine mounted in the case... Only to find out that I have rad fitment issues sigh.. and a pump/res mount issue. My ut 60 280 wont play nice in the front so it has to go on the top, and my 360 wont fit in the front... -_- Gonna go buy another rad from mirco center in the morning.
|
acebound
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2008/08/09 18:10:02
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 18:43:01
(permalink)
@ssiperko1.....This is as far as I went on air "cold air" Hope to run 1700 core 1000 mem for gaming 1080p surround! 
Cooler Master Cosmos ll - EVGA Z270 Classified - i7-7700k @4.8 MHz 1.20v- Corsair H115i - Corsair Vengeance LPX DDR4 3200 16GB - EVGA GTX980K|NGP|N / SLI @1550 Core 8000 Mem - Samsung NVMe SSD 960 EVO 500GB - Samaung SSD 840 PRO 256GB - WD 500GB Velociraptor - EVGA SuperNOVA 1300W G2 - Windows 10 Pro - Acer Predator XB1 27" 165Hz
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 20:26:19
(permalink)
Switched from driver 350.xx to 347.09 and temps are down 5 degrees and I am not getting artifacts. I am running the GOTV (CSGO) benchmark while work on blocks. I didn't Dremel back for enough, so it still pushes on the pins, but hell if I care at this point. My tubing should be here Monday, and then I will make a very primitive loop to hold everything over until I can get the PETG tubing in. 
post edited by Scarlet-Tech - 2015/04/25 20:33:48
|
acebound
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2008/08/09 18:10:02
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 21:12:57
(permalink)
 OMG....ok then hmmmmm how about cut nicely black electrical tape to finish the job! 
Cooler Master Cosmos ll - EVGA Z270 Classified - i7-7700k @4.8 MHz 1.20v- Corsair H115i - Corsair Vengeance LPX DDR4 3200 16GB - EVGA GTX980K|NGP|N / SLI @1550 Core 8000 Mem - Samsung NVMe SSD 960 EVO 500GB - Samaung SSD 840 PRO 256GB - WD 500GB Velociraptor - EVGA SuperNOVA 1300W G2 - Windows 10 Pro - Acer Predator XB1 27" 165Hz
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/25 21:48:49
(permalink)
I am not going to be staying at it. If you are wedging your head between the PCI bracket and the case, you have issues. The only other way to see it is with a flash like through the honey comb in the very back. :-p the outside of the plexi looks like the rest of the plexi. You should be able to seethem if you climb behind the case and put a light through the back to see that one little spot.  Oh yeah.. Here is a preview:  I have never used rigid tubing, so this may be a slow process. There is two pumps in the back right now, and I am going to have to shorten all of the wires to fit. since about 3/4 of the 24 pin is just Hanging in the back... Either way, I am going to bed. have a good night everyone :-)
post edited by Scarlet-Tech - 2015/04/26 07:03:26
|
antandbetty
iCX Member
- Total Posts : 318
- Reward points : 0
- Joined: 2014/12/01 19:13:42
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/26 01:23:37
(permalink)
|
nycx360
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 2009/08/23 14:46:09
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/26 07:42:03
(permalink)
LOL you should of seen my crude method -.- I live in manhattan so I have no garage to work out of etc, nor do I own any home improvement tools outside of the basic drill and tool kit and dremel. I simply just put too weight plates on either side the waterblock and went at it from the edge of a table LOL.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
|
antandbetty
iCX Member
- Total Posts : 318
- Reward points : 0
- Joined: 2014/12/01 19:13:42
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/26 12:07:35
(permalink)
nycx360
LOL you should of seen my crude method -.- I live in manhattan so I have no garage to work out of etc, nor do I own any home improvement tools outside of the basic drill and tool kit and dremel. I simply just put too weight plates on either side the waterblock and went at it from the edge of a table LOL.
lol at least you did it......I changed the photo to show the correct tool. It is for people like you and i who have no room. Fits right on the end of a counter or table and turns the dremel into a small router. 29 bucks... PS: Scarlet-Tech, Looks freaking great man!
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free" R.R.
|
acebound
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2008/08/09 18:10:02
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/26 16:33:44
(permalink)
Scarlet-Tech, Very nice Looks like your plan is coming together. Will the EVGA back plate work with water block hole pattern? I'm not concerned about clearance hole size for screws its the pattern line up.
Cooler Master Cosmos ll - EVGA Z270 Classified - i7-7700k @4.8 MHz 1.20v- Corsair H115i - Corsair Vengeance LPX DDR4 3200 16GB - EVGA GTX980K|NGP|N / SLI @1550 Core 8000 Mem - Samsung NVMe SSD 960 EVO 500GB - Samaung SSD 840 PRO 256GB - WD 500GB Velociraptor - EVGA SuperNOVA 1300W G2 - Windows 10 Pro - Acer Predator XB1 27" 165Hz
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/26 17:30:49
(permalink)
acebound
Scarlet-Tech,
Very nice Looks like your plan is coming together. Will the EVGA back plate work with water block hole pattern?
I'm not concerned about clearance hole size for screws its the pattern line up.
Yes, the pattern lines up, but the screw hole is around and m3.5 and the screw is an m4. With the correct persuasion (which I am not going to entertain for RMA purposes) the screws can fit through perfect. The waterblock will always use the same hole pattern as the cards, or you would be drilling through your card to install waterblocks lol. :-P
|
20219348762341
FTW Member
- Total Posts : 1289
- Reward points : 0
- Joined: 2013/12/21 21:26:25
- Status: offline
- Ribbons : 2
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/26 17:50:13
(permalink)
 That looks great but you know what you need to make it look even better, unless you just waiting for it 
post edited by AWK16 - 2015/04/26 17:53:20
Attached Image(s)
|
acebound
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2008/08/09 18:10:02
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/27 16:31:35
(permalink)
I'm so not in the mood for this tonight....time to mix another stiff drink  
Cooler Master Cosmos ll - EVGA Z270 Classified - i7-7700k @4.8 MHz 1.20v- Corsair H115i - Corsair Vengeance LPX DDR4 3200 16GB - EVGA GTX980K|NGP|N / SLI @1550 Core 8000 Mem - Samsung NVMe SSD 960 EVO 500GB - Samaung SSD 840 PRO 256GB - WD 500GB Velociraptor - EVGA SuperNOVA 1300W G2 - Windows 10 Pro - Acer Predator XB1 27" 165Hz
|
20219348762341
FTW Member
- Total Posts : 1289
- Reward points : 0
- Joined: 2013/12/21 21:26:25
- Status: offline
- Ribbons : 2
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/27 16:36:20
(permalink)
I'm so not in the mood for this tonight....time to mix another stiff drink You get to many of those, you will never finish, or if you do your work might not look as good as you think the next day 
post edited by AWK16 - 2015/04/27 16:40:05
|
nycx360
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 2009/08/23 14:46:09
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/27 19:34:26
(permalink)
acebound
I'm so not in the mood for this tonight....time to mix another stiff drink
LOL SO MUCH MORE PROFESSIONAL OF A METHOD than mine. Mine was so crude lol. Sanding bit on a drill lawl. Whatever gets the job done. Got my blocks and up running. Can't say for stock temps since I have both switches on and pumping more voltage in. Managed to get the card up to 70c under load on water lol but did hit high 1600s for a quick run.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
|
nycx360
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 2009/08/23 14:46:09
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/27 20:47:40
(permalink)
I have but the temps would be outta control. Kind of wish I had more rads. My temps are kinda high with an oc. My cpu temps are not doing so well thanks to these cards. I got a 280, 240, and 140 going and it seems like another triple would be better but I would have to mount that outside of the case. Running @ 1580 on the gpu idle 36c load in the 50s and my cpu is idling @ 40c ...
post edited by nycx360 - 2015/04/27 20:53:08
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/27 20:48:44
(permalink)
So... Mount it outside the case... Lol.
|
nycx360
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 2009/08/23 14:46:09
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/27 20:53:20
(permalink)
Scarlet-Tech
So... Mount it outside the case... Lol.
Rather get another case lol. My days of rigging rads to the outside of my case is over. However, the silence is much appreicaited
|
AnonymousGuy
iCX Member
- Total Posts : 452
- Reward points : 0
- Joined: 2014/09/17 21:15:46
- Status: offline
- Ribbons : 2
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/27 21:26:20
(permalink)
I would probably have taken a miter saw and shortened that whole edge of the block by a cm or so to clear the pins.
Workstation: 12900KF @ 5.2Ghz || MSI Pro-A Z690 DDR4|| EVGA FTW3 3090 1000W || G.Skill 3866 4x8GB || Corsair AX1200i || whole-house loop. Mining Box: HP Prodesk G1 (Haswell 4590), 3x Gigabyte 3080Ti, AX1500i @ 240V. LANRig/GuestGamingBox: 9900nonK || Gigabyte Z390 Master || ASUS TUF 3090 650W shunt || Corsair SF600 || CPU+GPU watercooled 280 rad pull only || whole-house loop. Server Router (Untangle): 8350K @ 4.7Ghz || ASRock Z370 ITX || 2x8GB 3200 || PicoPSU 250W, running on AX1200i || whole-house loop. Server Compute/Storage: 10850K @ 5.1Ghz || Gigabyte Z490 Ultra || EVGA 3060 || LSI 9280i-24 port || 4TB Samsung 860 Evo, 5x10TB Seagate Enterprise Raid 6, 4x8TB Seagate Archive Backup || whole-house loop. Laptop: HP Elitebook 840 G8 (Intel 1185G7) + 3060 Thunderbolt Dock, Razer Blade Stealth 13" 2017 (Int
|
nycx360
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 2009/08/23 14:46:09
- Status: offline
- Ribbons : 0
Re: Does the GTX 980 KINGPIn have a compatible waterblock???
2015/04/27 21:51:28
(permalink)
Well pretty much with just the swtiches and the power slider jacked up in psx I can do a hair under 1600mhz no problem. Anything more will require using the classy tool and really juicing this thing, makes temps out the roof even on water but for sure makes some very high clocks. Guess I will roll @ 1580 for daily driver. Keeps temps around mid 50s under load and my cpu temps are within reason under 100% load at the same time. These aren't clocks I could achieve prior without making a windtunnel. My cards were horrid on air. mid 1550s brought out 85-90c temps with 100% fan. Stock OC bios btw. I am sure could better with a diff bios. Mem clock makes up for this card, elsewise it's not too impressive for such a high priced 980. Looks sick though for sure, but I think my next non ref high end will be an asus matrix.
post edited by nycx360 - 2015/04/27 22:01:55
|