Hello! I would like to run a problem by the community to see if anyone has any suggestions to this issue.
As of last night, when I powered on my computer the display was coming up at the wrong resolution, and only one monitor (2 monitor set up) was coming on. I have the FTW X99 board and an EVGA 970 SSC video card. I checked in device manager and there is a yellow triangle on the item:
Intel(R) Xeon(R) E5 v3/Core i7 PCI Express Root Port 2 - 2F04
I had the video card in slot 4 (I believe 1 and 4 are X16?) and it had been working fine. After this issue, I moved it to slot 1 and it is working fine there now as well. I checked in the BIOS and even when plugged into slot 4 it shows up as "X16 Gen 3" so it seems like the BIOS understands that the card is there.
If I open up GeForce Experience while he card is in slot 4 it says something to the effect that no compatible hardware is detected. I also can't reinstall the video drivers with the card in #4, it says that there are no GeForce cards detected. I tried my GTX 770 from another computer, and it also does not work in slot 4. I'm not entirely sure where the drivers for the device with the issue in device manager are supposed to come from. Doing a search for it yields about 20 sites promising to give me the drivers, but not a single one looks the least bit legit. I've never had to manually install a driver for this before, and I'm assuming if the port was working properly it would auto-install.
Anyone have any thoughts on this?
Computer specs...
X99 FTW board
i7 5930k
EVGA 970 SSC
16 gig GSkill RAM
Aser XB270 monitor, display port
HP 25" monitor, HDMI
Thanks for any infos!
D