pipes80
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2012/05/02 05:52:04
- Status: offline
- Ribbons : 0
I have a problem with how the adaptive voltage, basically if a septum cpu offset voltage as in the picture, coming to have a voltage hate about 1.3 volts (1.3 volts to override are stable to 46x100 MHz), I can not to open windows because I get stuck to the next screen to be the logo of windows. Even using the target cpu voltage I get the same result. any suggestions. Thanks in advance   
post edited by pipes80 - 2015/03/30 13:21:18
CASE: enermax Fulmo GT PS: Seasonic 1200 platinum MB: EVGA X99 Classified CPU: core i7 5960X COOLING: EK Supremacy evo full nickel VGA: EVGA Gtx 980 Ti Classified RAM: G.Skill Ripjaws 4 16GB 2400Mhz CL15 HD: ssd chronos dlx 120 GB 1TB MASTERIZZATORE: pioneer 216D MONITOR: Samsung P2770HD S.O: Win 8.1 pro 64 bit
|
angelous86
Superclocked Member
- Total Posts : 126
- Reward points : 0
- Joined: 2008/11/06 08:26:16
- Location: LONDON, ENGLAND, UK
- Status: offline
- Ribbons : 1
Re: adaptive voltage problem
2015/03/30 14:25:53
(permalink)
hi mate,
leave all the voltage settings on auto
the only voltage settings you need to play around with are the following
CPU volt mode
CPU voltage target
CPU offset voltage
example for would be as follows
CPU volt mode : adaptive
CPU voltage target : 1.350
CPU offset voltage : +75
also please note, that the higher your oc, more is voltage required to gain system stability.
i have a similar setup to yours, and im running at the following settings
CPU i7 5930k : oc'd 4.5Ghz (35 x 128.65)
CPU volt mode : override
CPU voltage target : 1.350
CPU offset voltage : +75
Ram Profile : corsair dominator platinum XMP 2 (2800mhz 16-18-18-37 2T @ 1.35v)
let us know what happens, and good luck
PSU - EVGA SuperNova 1300W G2 : MOBO - EVGA X99 Classified : GPU - EVGA GTX 980 SC ACX 2.0 x 3 SLI : CPU - Intel Core i7 5930K : RAM - Corsair Dominator Platinum 32GB (8 x 4GB - CMD16GX4M4A2666C16) : SLI Bridge - EVGA PRO V2 : M.2 SSD - Samsung SSD 950 PRO 256GB (O/S Drive) : SSD - Samsung SSD 850 EVO 250GB + 500GB (Spanned Volume : Games)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: adaptive voltage problem
2015/03/30 14:38:36
(permalink)
Looks a little low for 4.6, I was using +380 myself with the i7-5960X (CPU voltage target: 0)
|
pipes80
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2012/05/02 05:52:04
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/30 14:59:43
(permalink)
I'am stable with override 1,300 volts, now I have try voltage target 1.100 offset +200 and It's start on windows but restart immediatly
CASE: enermax Fulmo GT PS: Seasonic 1200 platinum MB: EVGA X99 Classified CPU: core i7 5960X COOLING: EK Supremacy evo full nickel VGA: EVGA Gtx 980 Ti Classified RAM: G.Skill Ripjaws 4 16GB 2400Mhz CL15 HD: ssd chronos dlx 120 GB 1TB MASTERIZZATORE: pioneer 216D MONITOR: Samsung P2770HD S.O: Win 8.1 pro 64 bit
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: adaptive voltage problem
2015/03/30 15:20:07
(permalink)
1.300 may be to low, watch out for your CPU Temperatures
|
dellguyz
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 2015/03/04 07:01:21
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/30 15:24:41
(permalink)
my experience is that don't touch the target voltage (leave it zero) and only play with the offset voltage if you are running +adaptive mode. 1.3V for 46x is a bit too less, try increase the voltage to somewhere 1.35-1.38 (i.e. +330 to +350 adaptive) and try again
Case: Phantek Enthoo Luxe PSU: Superflower Leadex Platinum 1200W GPU:Palit Super JetStream 980Ti (2 Way-SLI) CPU: Intel i7-5820K @ 4.4Ghz CPU Cooler: NZXT Kraken X61 Motherboard: EVGA X99 FTW Memory: G.SKILL Ripjaws 4 2400MHz 16GB (4 x 4GB) Hard drive 1: Crucial M550 256GB SSD Hard drive 2: Crucial MX100 512GB SSD Hard drive 3: TOSHIBA DT01ACA300 3TB HDD Monitor: BenQ BL3201PT 32" 4K LCDmonitor
|
pipes80
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2012/05/02 05:52:04
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/30 15:31:01
(permalink)
but in override is stable at 1,3...in adaptive i don't know, is don't work without no setting
CASE: enermax Fulmo GT PS: Seasonic 1200 platinum MB: EVGA X99 Classified CPU: core i7 5960X COOLING: EK Supremacy evo full nickel VGA: EVGA Gtx 980 Ti Classified RAM: G.Skill Ripjaws 4 16GB 2400Mhz CL15 HD: ssd chronos dlx 120 GB 1TB MASTERIZZATORE: pioneer 216D MONITOR: Samsung P2770HD S.O: Win 8.1 pro 64 bit
|
dellguyz
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 2015/03/04 07:01:21
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/30 16:07:44
(permalink)
pipes80
but in override is stable at 1,3...in adaptive i don't know, is don't work without no setting
system will keep restart and can't even get back to BIOS screen if no setting in adaptive mode
Case: Phantek Enthoo Luxe PSU: Superflower Leadex Platinum 1200W GPU:Palit Super JetStream 980Ti (2 Way-SLI) CPU: Intel i7-5820K @ 4.4Ghz CPU Cooler: NZXT Kraken X61 Motherboard: EVGA X99 FTW Memory: G.SKILL Ripjaws 4 2400MHz 16GB (4 x 4GB) Hard drive 1: Crucial M550 256GB SSD Hard drive 2: Crucial MX100 512GB SSD Hard drive 3: TOSHIBA DT01ACA300 3TB HDD Monitor: BenQ BL3201PT 32" 4K LCDmonitor
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: adaptive voltage problem
2015/03/30 16:43:18
(permalink)
dellguyz
pipes80
but in override is stable at 1,3...in adaptive i don't know, is don't work without no setting
system will keep restart and can't even get back to BIOS screen if no setting in adaptive mode
How do you have your Memory Setup in the Bios?
|
pipes80
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2012/05/02 05:52:04
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/30 21:19:17
(permalink)
CASE: enermax Fulmo GT PS: Seasonic 1200 platinum MB: EVGA X99 Classified CPU: core i7 5960X COOLING: EK Supremacy evo full nickel VGA: EVGA Gtx 980 Ti Classified RAM: G.Skill Ripjaws 4 16GB 2400Mhz CL15 HD: ssd chronos dlx 120 GB 1TB MASTERIZZATORE: pioneer 216D MONITOR: Samsung P2770HD S.O: Win 8.1 pro 64 bit
|
pipes80
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2012/05/02 05:52:04
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/31 00:25:08
(permalink)
In override mode the system is stable, 80 c on stress test and not take bsod...in adaptive mode my system restart or block when load windows
CASE: enermax Fulmo GT PS: Seasonic 1200 platinum MB: EVGA X99 Classified CPU: core i7 5960X COOLING: EK Supremacy evo full nickel VGA: EVGA Gtx 980 Ti Classified RAM: G.Skill Ripjaws 4 16GB 2400Mhz CL15 HD: ssd chronos dlx 120 GB 1TB MASTERIZZATORE: pioneer 216D MONITOR: Samsung P2770HD S.O: Win 8.1 pro 64 bit
|
pipes80
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2012/05/02 05:52:04
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/31 03:05:50
(permalink)
problem solved...thanks to all for helping
CASE: enermax Fulmo GT PS: Seasonic 1200 platinum MB: EVGA X99 Classified CPU: core i7 5960X COOLING: EK Supremacy evo full nickel VGA: EVGA Gtx 980 Ti Classified RAM: G.Skill Ripjaws 4 16GB 2400Mhz CL15 HD: ssd chronos dlx 120 GB 1TB MASTERIZZATORE: pioneer 216D MONITOR: Samsung P2770HD S.O: Win 8.1 pro 64 bit
|
stayclassified
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2015/03/27 20:01:11
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/31 11:36:04
(permalink)
pipes80
problem solved...thanks to all for helping
how was it solved?
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: adaptive voltage problem
2015/03/31 11:39:46
(permalink)
See Post http://forums.evga.com/FindPost/2316245 for my Bios Settings. stayclassified
pipes80
problem solved...thanks to all for helping
how was it solved?
Please Share how you solved it. Please don't tell us you bought an ASUS to solve your problem.
|
DAVE2HOT4U
FTW Member
- Total Posts : 1114
- Reward points : 0
- Joined: 2009/10/27 09:38:02
- Status: offline
- Ribbons : 3
Re: adaptive voltage problem
2015/03/31 12:12:03
(permalink)
bcavnaugh
See Post http://forums.evga.com/FindPost/2316245 for my Bios Settings.stayclassified
pipes80
problem solved...thanks to all for helping
how was it solved?
Please Share how you solved it.
Please don't tell us you bought an ASUS to solve your problem.
Na he had a alien from the (other) thread help him ! 
|
pipes80
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2012/05/02 05:52:04
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/31 12:38:48
(permalink)
The problem was due to the use of piau power states (C-state), as regards my system can use only one and not more than one ... am using the state C1E that seems to be the more advantageous one at the level of consumption
CASE: enermax Fulmo GT PS: Seasonic 1200 platinum MB: EVGA X99 Classified CPU: core i7 5960X COOLING: EK Supremacy evo full nickel VGA: EVGA Gtx 980 Ti Classified RAM: G.Skill Ripjaws 4 16GB 2400Mhz CL15 HD: ssd chronos dlx 120 GB 1TB MASTERIZZATORE: pioneer 216D MONITOR: Samsung P2770HD S.O: Win 8.1 pro 64 bit
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: adaptive voltage problem
2015/03/31 12:53:42
(permalink)
That is what happens when you mess with the C-state and ask for help why you are having adaptive voltage problem but forget to tell anyone that you made manual changes to the C-state  That would make since that it would take an alien to solve the issue.
|
pipes80
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2012/05/02 05:52:04
- Status: offline
- Ribbons : 0
Re: adaptive voltage problem
2015/03/31 13:05:22
(permalink)
My problem was that: I had disabled the c-state to use the override mode and test voltage demanded that my cpu ... I have the cpu that requires override in 1,299 46x99,7 taking the Rams in stock as well 47x I thanks all for help me
post edited by pipes80 - 2015/03/31 13:07:37
CASE: enermax Fulmo GT PS: Seasonic 1200 platinum MB: EVGA X99 Classified CPU: core i7 5960X COOLING: EK Supremacy evo full nickel VGA: EVGA Gtx 980 Ti Classified RAM: G.Skill Ripjaws 4 16GB 2400Mhz CL15 HD: ssd chronos dlx 120 GB 1TB MASTERIZZATORE: pioneer 216D MONITOR: Samsung P2770HD S.O: Win 8.1 pro 64 bit
|