MajorWoody419
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2014/12/18 19:29:52
- Status: offline
- Ribbons : 0
EVGA Precision X help? Would like to know some recommended settings for mem clock and gpu clock offsets. Should I use overvoltage for any reason? Any help or suggestions would be appreciated. My rig; HPE(2013) GeForce GTX 750Ti, AMD FX 6120 Six Core, 16gb HyperX Fury, Win7 Home Premium. 1920x1080 @ 60hz (SyncMaster S24B300) Any suggestions on getting max performance out of my card. Currently getting about 70-80avg FPS in BF4 and similar games. I let the GeForce Experience optimize my graphics.
post edited by MajorWoody419 - 2015/03/06 20:34:02
EVGA X99 Classy, i7-5820k, EVGA GTX970 FTW ACX 2.0+w backplate, Corsair H110i GTX, EVGA Supernova 850P2, Corsair Carbide Series Air 540, Samsung EVO850 SSD 500gb, Corsair Vengeance 4x4gb @3000mhz, LG16x BD/MODISC,
|
skippergonzo
Superclocked Member
- Total Posts : 177
- Reward points : 0
- Joined: 2011/07/25 09:18:06
- Status: offline
- Ribbons : 0
Re: GTX 750Ti-EVGA Precision X help?
2015/03/05 15:10:43
(permalink)
☄ Helpfulby MajorWoody419 2015/03/05 15:15:40
try the settings I have:
Core clock +135
Memory +400
Power limit 100%
Temp limit 80%
I get 90 plus FPS in BF4
Don't touch over voltage, you can brick your card that way.
|
MajorWoody419
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2014/12/18 19:29:52
- Status: offline
- Ribbons : 0
Re: GTX 750Ti-EVGA Precision X help?
2015/03/05 16:40:09
(permalink)
Do you think I could get a better graphics card or am I pretty much maxed out with a 750 Ti on this processor. ie sometimes I get some serious screen flicker in heavy combat or explosion situations in the game.
I'm really looking to fully replace the whole rig(within a year or two)but I thought if I could get a little more life out of this one I'd save my money.
EVGA X99 Classy, i7-5820k, EVGA GTX970 FTW ACX 2.0+w backplate, Corsair H110i GTX, EVGA Supernova 850P2, Corsair Carbide Series Air 540, Samsung EVO850 SSD 500gb, Corsair Vengeance 4x4gb @3000mhz, LG16x BD/MODISC,
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: GTX 750Ti-EVGA Precision X help?
2015/03/06 05:08:03
(permalink)
☄ Helpfulby MajorWoody419 2015/03/06 16:14:38
Did you overclock card and than you notice screen flickering?
Do you Enable Vsync in games or not?
1080p monitor is OK, 16GB is still OK, processor is not for high end graphics but I think you can install GTX960/GTX970 on him.
I would not push GTX750Ti too much. Overclocking never give you enough performance if your card is weak. That's only little help and for fun.
Mostly help with high end graphics where 100MHz OC bring 1000-1200 points in Firestrike and can reflect as 4-5 fps in some games.
|
MajorWoody419
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2014/12/18 19:29:52
- Status: offline
- Ribbons : 0
Re: GTX 750Ti-EVGA Precision X help?
2015/03/06 16:13:58
(permalink)
The flicker was really only when I was in a chopper with my repair tool BF4. I OC'ed and it quit then I went to default and it didn't do it anymore either so maybe just a bug. With the above settings I get a pretty consistent high 80's to low 90's FPS, card barley gets warm, I'm happy with that. My HP case & MOB layout really wont fit anything bigger than the standard 750Ti. So I'm doing my research and going to custom build a rig in the next year or two.
EVGA X99 Classy, i7-5820k, EVGA GTX970 FTW ACX 2.0+w backplate, Corsair H110i GTX, EVGA Supernova 850P2, Corsair Carbide Series Air 540, Samsung EVO850 SSD 500gb, Corsair Vengeance 4x4gb @3000mhz, LG16x BD/MODISC,
|
MajorWoody419
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2014/12/18 19:29:52
- Status: offline
- Ribbons : 0
Re: GTX 750Ti-EVGA Precision X help?
2015/03/06 20:39:14
(permalink)
This is fairly new to me so I had another question my old ram cards use to run from freq. 400-800 and the new fury cards only run 466-800 is that good/bad or indifferent. Should I change?
EVGA X99 Classy, i7-5820k, EVGA GTX970 FTW ACX 2.0+w backplate, Corsair H110i GTX, EVGA Supernova 850P2, Corsair Carbide Series Air 540, Samsung EVO850 SSD 500gb, Corsair Vengeance 4x4gb @3000mhz, LG16x BD/MODISC,
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: GTX 750Ti-EVGA Precision X help?
2015/03/07 04:47:22
(permalink)
MajorWoody419
The flicker was really only when I was in a chopper with my repair tool BF4. I OC'ed and it quit then I went to default and it didn't do it anymore either so maybe just a bug. With the above settings I get a pretty consistent high 80's to low 90's FPS, card barley gets warm, I'm happy with that. My HP case & MOB layout really wont fit anything bigger than the standard 750Ti. So I'm doing my research and going to custom build a rig in the next year or two.
OK, if you need any kind of advice when the time comes people here will help you with advice what's best for you and your budget. I'm not sure I understand you, you ask about HyperX Fury memory 1600MHz? You should install CPU-Z and read DRAM Frequency under Memory section same as Size and Channel.
|
MajorWoody419
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2014/12/18 19:29:52
- Status: offline
- Ribbons : 0
Re: GTX 750Ti-EVGA Precision X help?
2015/03/07 10:08:48
(permalink)
Vlada011
MajorWoody419
The flicker was really only when I was in a chopper with my repair tool BF4. I OC'ed and it quit then I went to default and it didn't do it anymore either so maybe just a bug. With the above settings I get a pretty consistent high 80's to low 90's FPS, card barley gets warm, I'm happy with that. My HP case & MOB layout really wont fit anything bigger than the standard 750Ti. So I'm doing my research and going to custom build a rig in the next year or two.
OK, if you need any kind of advice when the time comes people here will help you with advice what's best for you and your budget.
I'm not sure I understand you, you ask about HyperX Fury memory 1600MHz?
You should install CPU-Z and read DRAM Frequency under Memory section same as Size and Channel.
I use HWiNFO64 and in the memory modules it tells me Freq, CL, RCD, etc... and my old Hynix ram cards ran a Freq. from 400.0 - 800.0 and the new hyper ram cards run from 466.7-800.0. I going to check out CPU-Z. Thanks
EVGA X99 Classy, i7-5820k, EVGA GTX970 FTW ACX 2.0+w backplate, Corsair H110i GTX, EVGA Supernova 850P2, Corsair Carbide Series Air 540, Samsung EVO850 SSD 500gb, Corsair Vengeance 4x4gb @3000mhz, LG16x BD/MODISC,
|