BIOS 1.15 updates:
 

• Fixed POSTing issue with certain kits of 2667 RAM
• Support NVMe device for bootable device.
• Allows user to disable CSM items directly. User doesn't need to change launch video mode.
• Fix USB Keyboard/Mouse can wake up system after shutdown on Window 8.
• Fix E5-1680 CPU instability issue.
• Fix ELEETX memory information read error.
• USB profile compatible with R114.

Windows Installation

• Download the correct .zip file below for your motherboard:

         151-HE-E999-KR - EVGA X99 Classified
         150-HE-E997-KR - EVGA X99 FTW
         131-HE-E995-KR - EVGA X99 Micro

• First go into your BIOS and load defaults, save and exit
• Close all open programs.
• Go into the folder where you unzipped this package and update.bat
• Press Y to start the flash process
• DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
• After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
• NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

  
BIOS Installation

• Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
• Reboot the machine and go into the system BIOS

• From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
• Select the .bin file you wish to flash.

Are we going to get a new version of ELEETX with this Bios, it has been in Beta from day one and it shows no temperatures and other information.
 
It the Bios Different for each OS now and even Different between 32Bit and 64 Bit the support page shows that it is now?

Why cleaned boot mode selection (Legacy or UEFI)? I installed windows in UEFI mode, could not boot, had to save a profile with 1.14 and download it in 1.15. Fix please.

bcavnaugh
This is what is missing in 1.15

yes

kyo1000
Problem with Asus Xonar sound card still not fixed LoL

Are you saying that you did test this ASUS Part and still have issues?
First Post I have seem about this Asus Xonar cards others yes but not this one.
What Model do you have?

efilloon

• Fix USB Keyboard/Mouse can wake up system after shutdown on Window 8.

 
FYI: This also happens with Windows 10. So I hope that the fix for Windows 8 will work for Windows 10? Yes I know its still Tech Preview but its also happens with Windows 10, just a heads up....

So you are working ok on Windows 7 Ultimate 64bit? or are you now on Windows 8.x?

bcavnaugh

kyo1000
Problem with Asus Xonar sound card still not fixed LoL

Are you saying that you did test this ASUS Part and still have issues?
First Post I have seem about this Asus Xonar cards others yes but not this one.
What Model do you have?

Essence STX

I have problem that, My PCI-E lanes is just doing 3.0 8x,  not 16X   i gott 4 way sli 780Ti classifieds all stays 8x  even whit PCI Disable still stays 3.0 8x,  i saw the other guy here had 4 way aswell  Whit 16x 8x 8x 8x,  mine is just all 8x

Why is this,  its all like this whit all bios

Good News Everyone....
I spoke with engineering last night, (had a convo with BCavanaugh about this as well as he was PMing me) and they looked into it, they were able to reproduce your issues (I sent them to this thread so they could test and reproduce),and have a release of 1.16, this is 1.15 with the boot mode added back into CSM.
I apologize about the issues everyone, but good catch and thank you for bringing it to my attention.  Granted not everything is able to be fixed this quickly, but, when we can we try to get fixes out this fast.  I will make a 1.16 thread for the announcement and have the new BIOS available there and I will be adding it to our download site as well.  Since I have to add things one at a time, the download site will likely be done in about 30 minutes from now.
 
Thanks for the patients.

EVGATech_DaveB
Good News Everyone....
I spoke with engineering last night, (had a convo with BCavanaugh about this as well as he was PMing me) and they looked into it, they were able to reproduce your issues (I sent them to this thread so they could test and reproduce),and have a release of 1.16, this is 1.15 with the boot mode added back into CSM.
I apologize about the issues everyone, but good catch and thank you for bringing it to my attention.  Granted not everything is able to be fixed this quickly, but, when we can we try to get fixes out this fast.  I will make a 1.16 thread for the announcement and have the new BIOS available there and I will be adding it to our download site as well.  Since I have to add things one at a time, the download site will likely be done in about 30 minutes from now.
 
Thanks for the patients.

Great EVGA Support & End Users Working together to solve an issue. Thank you EVGA.
Thank you users other than gtxjackbauer (Windows 8 is not) for being patent with the new Bios.

EVGATech_DaveB
Thanks BCavanaugh, have you tried the new BIOS yet?
 
Let me know if there are further concerns, as this should fix the issue that was reported.

Going to do it now, sorry did not see it out.
 
Update, See Post http://forums.evga.com/FindPost/2304634 1.16 is a Go.

jokke
sett all to 3.0 but all showed as 8x only it has been that before long time before :/ if you disable pci-e lanes does it for you automatically change to 16x if you got all cards in the system 1 or 2?... If I disabled 3 of the lanes onl 1 card lane enable it stays at 3.0 8x

Can you please post an image of your Bios?
Like the one in http://forums.evga.com/FindPost/2304550 #18

No 16X,  Just installed 1.16  Still 8x