EVGA

Z97 Classy Post Beeps Question

Author
Post
Essentials Only Full Version
peteo_85
SSC Member
  • Total Posts : 693
  • Reward points : 0
  • Joined: 2008/09/14 13:46:13
  • Location: Kadena Air Base, Japan
  • Status: offline
  • Ribbons : 3
2015/03/02 07:08:21 (permalink)
Just picked up the Corsair k70 RGB and once I boot, I notice a lot more post beeps than before. Very odd considering the only thing that I plugged in was the two USB 2.0 cables that are required for the keyboard. Assuming one USB is to power the LED's and the other is for the keyboard... 
Everythigng boots just fine... just wondering if it's something I could be worried about. 

Intel Core i7-6700K Skylake 4.0GHz LGA 1150   
EVGA Z170 Stinger
Corsair Dominator Platinum DDR4 16GB
ZOTAC GTX 1080 Arctic Storm 
CORSAIR SFF 600W PSU
#1

4 Replies Related Threads
    TimP
    EVGA Alumni
    • Total Posts : 136
    • Reward points : 0
    • Joined: 2014/12/08 11:09:06
    • Status: offline
    • Ribbons : 0
    Re: Z97 Classy Post Beeps Question 2015/03/03 13:54:44 (permalink)
    Hello Peteo_85,
     
    As long as you are able to boot successfully, I would not worry about the beeps as they are just checks in the pre-post process. You may want to make sure you are using the latest BIOS. If you have any further issues or questions, feel free to contact us 24/7 at 1-888-881-3842 or by email at support@evga.com.
     
    #2
    peteo_85
    SSC Member
    • Total Posts : 693
    • Reward points : 0
    • Joined: 2008/09/14 13:46:13
    • Location: Kadena Air Base, Japan
    • Status: offline
    • Ribbons : 3
    Re: Z97 Classy Post Beeps Question 2015/03/03 16:22:29 (permalink)
    EVGATech_TimP
    Hello Peteo_85,
     
    As long as you are able to boot successfully, I would not worry about the beeps as they are just checks in the pre-post process. You may want to make sure you are using the latest BIOS. If you have any further issues or questions, feel free to contact us 24/7 at 1-888-881-3842 or by email at support@evga.com.
     


    Just updated to 1.07. not much of a difference but thanks for the reply!
    Just minor issues, if anything else arises, ill contact TS. Thanks again!
     
    -P

    Intel Core i7-6700K Skylake 4.0GHz LGA 1150   
    EVGA Z170 Stinger
    Corsair Dominator Platinum DDR4 16GB
    ZOTAC GTX 1080 Arctic Storm 
    CORSAIR SFF 600W PSU
    #3
    Randoo1212
    Superclocked Member
    • Total Posts : 148
    • Reward points : 0
    • Joined: 2010/02/09 02:59:54
    • Location: Coastal NJ
    • Status: offline
    • Ribbons : 1
    Re: Z97 Classy Post Beeps Question 2015/03/04 12:47:05 (permalink)
    the motherboard beeps? lol that's the first thing I turned off :-)
    #4
    JoeyC
    EVGA Alumni
    • Total Posts : 1703
    • Reward points : 0
    • Joined: 2012/02/22 09:56:36
    • Location: EVGA Brea
    • Status: offline
    • Ribbons : 4
    Re: Z97 Classy Post Beeps Question 2015/03/04 13:46:59 (permalink)
    Good afternoon,
     
    You can disable or turn off the post beeps if you would like. You just need to access the BIOS, click on the boot tab, then see the options below. Let us know if you have any other questions.
     

    Attached Image(s)


    Rate my service by going to: http://www.evga.com/myevga/rateus/

    #5
    Jump to:
  • Back to Mobile