EVGA

Helpful ReplyEVGA GTX 980 Classified waterblocks

Page: << < ..1112131415.. > >> Showing page 15 of 16
Author
Post
Essentials Only Full Version
Mangofire
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2006/01/03 12:21:24
  • Status: offline
  • Ribbons : 2
Re: EVGA GTX 980 Classified waterblocks 2015/02/27 09:53:15 (permalink)
I've got to brand new 3988's

Mobo: Asus Rampage V 
CPU: Intel Core i7-5930K, WB EK EVO 
GPU: EVGA 1080 Ti x  2 SLI EK WB'S 
RAM: Corsair Dominator Platinum 16 GB 2800
CASE: Corsair 900D 
PSU: EVGA 1600G2
HD: Samsung 950 Pro 512, 850 Pro, 3x730 Intels in Raid 0
OS: Windows 10 Pro 64Bit
Firestrike - 31044 
http://www.3dmark.com/fs/12259423
Firestrike Extreme - 22,520 http://www.3dmark.com/fs/12259351
Firestrike Ultra - 13,916 http://www.3dmark.com/fs/12259262
#421
EK_Luc
EK Forum Support
  • Total Posts : 324
  • Reward points : 0
  • Joined: 2014/11/05 10:43:15
  • Status: offline
  • Ribbons : 2
Re: EVGA GTX 980 Classified waterblocks 2015/02/27 10:06:35 (permalink)
Mangofire
I've got to brand new 3988's




Thanks 
#422
Smokey the Bear
Superclocked Member
  • Total Posts : 144
  • Reward points : 0
  • Joined: 2012/10/17 22:28:21
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/27 10:11:13 (permalink)
I hate that they changed the model number...
 
What I like is that my 2988 does 8.8 ghz on the mem in game with this block on. :) My core, meh, 1550 tops is good at stock ov, I guess.
 
40-50c tops with the block. I only hit 50c with my fans super low, in game.
#423
efilloon
New Member
  • Total Posts : 74
  • Reward points : 0
  • Joined: 2008/04/16 17:32:54
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/27 18:56:33 (permalink)
Well this is sooooooo awesome, 2 gtx 980 classifieds WITH EK WBs.
 
Room Temp 73F to 74F
Running BF4 in game for 2 hours
Top Card (Main Card) with 2 monitors running 144hz - 28c to 33c
Bottom Card - 26c to 28c
 
At Idle:
Top Card (Main Card) with 2 monitors running 144hz - 24c to 25c
Bottom Card - 21c to 22c
 
Totally Awesome!!
 
post edited by efilloon - 2015/02/28 12:17:05

EVGA X99 Classified
Intel 5930 4.329GHz (watercooled - Ek-Supremacy EV0 - (Original CSQ) Full Nickel)
32Gb Corsair Platinum Dominator 2800MHz
2 EVGA 980 Classified's (EK WBs)
512 Gb Samsung 850 Pro
Corsair 1000HX PSU
Corsair K70 Cherry MX Red RGB Mechanical Gaming Keyboard
Logitech G502 Proteus Spectrum
Sound Blaster Z PCIe Gaming Sound Card
Windows 10 Pro 64 bit
#424
GunslingerOCS
CLASSIFIED Member
  • Total Posts : 3009
  • Reward points : 0
  • Joined: 2006/11/30 19:08:08
  • Location: Decatur, AL
  • Status: offline
  • Ribbons : 9
Re: EVGA GTX 980 Classified waterblocks 2015/02/27 19:25:28 (permalink)
EK_Luc
All I know is that EVGA and EK is working on the block but I don't know if it will be an HydroCopper block made by EK but sold by EVGA as usual or an EK block sold by us or even both.



Regardless, please make this point to them loud and clear, we want to use the EVGA factory backplate with the EK block and not have to "rig" it to work.

13900K
ASRock Z690 Aqua OC
4TB Samsung EVO  
32 GB GSkill Royal 7800MHz  
EVGA RTX 3090 KPE
Corsair AX1500i
Heat:  http://www.heatware.com/eval.php?id=61643 

#425
stiltz85
Superclocked Member
  • Total Posts : 179
  • Reward points : 0
  • Joined: 2011/11/25 13:40:27
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/27 19:28:30 (permalink)
GunslingerOCS
EK_Luc
All I know is that EVGA and EK is working on the block but I don't know if it will be an HydroCopper block made by EK but sold by EVGA as usual or an EK block sold by us or even both.



Regardless, please make this point to them loud and clear, we want to use the EVGA factory backplate with the EK block and not have to "rig" it to work.

This.


#426
Crimson AL
iCX Member
  • Total Posts : 434
  • Reward points : 0
  • Joined: 2014/02/26 10:32:06
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/27 20:48:30 (permalink)
I'll add that I want the lights to also be able to go on the waterblock in addition to the backplate fitting.  
post edited by Crimson AL - 2015/02/27 20:58:50


#427
kot0005
New Member
  • Total Posts : 75
  • Reward points : 0
  • Joined: 2013/09/30 20:37:05
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/27 23:47:50 (permalink)
stiltz85
GunslingerOCS
EK_Luc
All I know is that EVGA and EK is working on the block but I don't know if it will be an HydroCopper block made by EK but sold by EVGA as usual or an EK block sold by us or even both.



Regardless, please make this point to them loud and clear, we want to use the EVGA factory backplate with the EK block and not have to "rig" it to work.

This.




Its better to ask EVGA to make a backplate with M3 screw size first..
 
#428
cerealkeller
Superclocked Member
  • Total Posts : 201
  • Reward points : 0
  • Joined: 2008/10/01 00:44:13
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/28 05:28:48 (permalink)
Did anybody use the non-conductive strip that came with the Classy 980s when installing this water block? The one that said it was for use with third party coolers.
post edited by cerealkeller - 2015/02/28 10:41:27

Intel i9 9900K 5.4 GHz Koolance CPU400 Water Block
EVGA Z390 Dark
32 GB G Skill Trident 4000 MHz G Skill RAM Cooler
EVGA RTX 3090 FTW3 Ultra (Optimus Block coming)
Samsung 960 Evo 1 TB
Seagate Fire Cuda 1 TB
EVGA 1600 P2 PSU
Pioneer BD-RW
Thermaltake Core W200 Super Tower
2 x Alphacool Nexxus Monsta 480x90mm Rads, 280x65mm Phobya Rad, 240x55mm Koolance Rad
2 x Koolance PMP450S 24v Pumps, 2 x 770ml Koolance Reservoirs, 12 x Corsair ML140s, 4 x Corsair SP120s, 8 x Corsair HD120s, 8 x Cooler Master Sickle Flow 120s
Windows 10
#429
FrogPants
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2012/06/11 17:48:52
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/28 10:13:33 (permalink)
So...can anyone explain how to make the evga backplate work on this? I have 3 blocks arriving next week and didn't order backplates. Guess I made a mistake there. I'm already using 3 evga backplates and vastly prefer their look. I'll get 3 more if I have to, but I really don't want to. If anyone has done this, or has any ideas, I'm all ears.
#430
efilloon
New Member
  • Total Posts : 74
  • Reward points : 0
  • Joined: 2008/04/16 17:32:54
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/28 10:42:46 (permalink)
I didn't use the non conductive strip that came with the cards, I used just what came with the EK Blocks.

EVGA X99 Classified
Intel 5930 4.329GHz (watercooled - Ek-Supremacy EV0 - (Original CSQ) Full Nickel)
32Gb Corsair Platinum Dominator 2800MHz
2 EVGA 980 Classified's (EK WBs)
512 Gb Samsung 850 Pro
Corsair 1000HX PSU
Corsair K70 Cherry MX Red RGB Mechanical Gaming Keyboard
Logitech G502 Proteus Spectrum
Sound Blaster Z PCIe Gaming Sound Card
Windows 10 Pro 64 bit
#431
cerealkeller
Superclocked Member
  • Total Posts : 201
  • Reward points : 0
  • Joined: 2008/10/01 00:44:13
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/28 10:52:12 (permalink)
efilloon
I didn't use the non conductive strip that came with the cards, I used just what came with the EK Blocks.

I didn't either, It didn't occur to me until after I already assembled the blocks. Thanks.

Intel i9 9900K 5.4 GHz Koolance CPU400 Water Block
EVGA Z390 Dark
32 GB G Skill Trident 4000 MHz G Skill RAM Cooler
EVGA RTX 3090 FTW3 Ultra (Optimus Block coming)
Samsung 960 Evo 1 TB
Seagate Fire Cuda 1 TB
EVGA 1600 P2 PSU
Pioneer BD-RW
Thermaltake Core W200 Super Tower
2 x Alphacool Nexxus Monsta 480x90mm Rads, 280x65mm Phobya Rad, 240x55mm Koolance Rad
2 x Koolance PMP450S 24v Pumps, 2 x 770ml Koolance Reservoirs, 12 x Corsair ML140s, 4 x Corsair SP120s, 8 x Corsair HD120s, 8 x Cooler Master Sickle Flow 120s
Windows 10
#432
efilloon
New Member
  • Total Posts : 74
  • Reward points : 0
  • Joined: 2008/04/16 17:32:54
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/28 12:16:16 (permalink)
Actually, I do not even know why EVGA even had the non conductive strip in the 980 packaging. I guess if you made a custom water block for it that you would need it. But you would need more than one strip that EVGA gives you anyway.

EVGA X99 Classified
Intel 5930 4.329GHz (watercooled - Ek-Supremacy EV0 - (Original CSQ) Full Nickel)
32Gb Corsair Platinum Dominator 2800MHz
2 EVGA 980 Classified's (EK WBs)
512 Gb Samsung 850 Pro
Corsair 1000HX PSU
Corsair K70 Cherry MX Red RGB Mechanical Gaming Keyboard
Logitech G502 Proteus Spectrum
Sound Blaster Z PCIe Gaming Sound Card
Windows 10 Pro 64 bit
#433
FrogPants
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2012/06/11 17:48:52
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/02/28 14:08:31 (permalink)
GunslingerOCS
EK_Luc
All I know is that EVGA and EK is working on the block but I don't know if it will be an HydroCopper block made by EK but sold by EVGA as usual or an EK block sold by us or even both.



Regardless, please make this point to them loud and clear, we want to use the EVGA factory backplate with the EK block and not have to "rig" it to work.


Anyone have any thoughts on how to "rig" the backplate? I really don't want to buy 3 more backplates. The evga backplates look a lot better anyways. If it's possible to rig these I'll do it.
#434
shogon
CLASSIFIED Member
  • Total Posts : 2741
  • Reward points : 0
  • Joined: 2008/08/30 09:27:20
  • Location: Manteca (lard), CA
  • Status: offline
  • Ribbons : 7
Re: EVGA GTX 980 Classified waterblocks 2015/02/28 14:31:15 (permalink)
FrogPants
GunslingerOCS
EK_Luc
All I know is that EVGA and EK is working on the block but I don't know if it will be an HydroCopper block made by EK but sold by EVGA as usual or an EK block sold by us or even both.



Regardless, please make this point to them loud and clear, we want to use the EVGA factory backplate with the EK block and not have to "rig" it to work.


Anyone have any thoughts on how to "rig" the backplate? I really don't want to buy 3 more backplates. The evga backplates look a lot better anyways. If it's possible to rig these I'll do it.

You have to buy the correct screws used on EK blocks to hold the non-EK blackplate on. I forget which size screws they are (M3?) but I went to Home Depot and bought a few 8mm and 10mm screws and some washers and had the 780ti KPE backplate on my EK block. 

I will either find a way, or make one.
 
٩(๏̯͡๏)۶ 
#435
EK_Luc
EK Forum Support
  • Total Posts : 324
  • Reward points : 0
  • Joined: 2014/11/05 10:43:15
  • Status: offline
  • Ribbons : 2
Re: EVGA GTX 980 Classified waterblocks 2015/03/01 09:43:09 (permalink)
Xyzibit
Talking about this... can you specify which screws exactly you have been using there to make it fit or even better link them?!



Sorry for the delayed answer.  The screws are 6mm in length
#436
cerealkeller
Superclocked Member
  • Total Posts : 201
  • Reward points : 0
  • Joined: 2008/10/01 00:44:13
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/03/01 10:52:17 (permalink)
Anybody know where I can get BIOS that allow me to exceed the 125% power draw?  The Kingpin BIOS are no good for me, so I need something else.

Intel i9 9900K 5.4 GHz Koolance CPU400 Water Block
EVGA Z390 Dark
32 GB G Skill Trident 4000 MHz G Skill RAM Cooler
EVGA RTX 3090 FTW3 Ultra (Optimus Block coming)
Samsung 960 Evo 1 TB
Seagate Fire Cuda 1 TB
EVGA 1600 P2 PSU
Pioneer BD-RW
Thermaltake Core W200 Super Tower
2 x Alphacool Nexxus Monsta 480x90mm Rads, 280x65mm Phobya Rad, 240x55mm Koolance Rad
2 x Koolance PMP450S 24v Pumps, 2 x 770ml Koolance Reservoirs, 12 x Corsair ML140s, 4 x Corsair SP120s, 8 x Corsair HD120s, 8 x Cooler Master Sickle Flow 120s
Windows 10
#437
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA GTX 980 Classified waterblocks 2015/03/01 17:02:14 (permalink)
cerealkeller
Anybody know where I can get BIOS that allow me to exceed the 125% power draw?  The Kingpin BIOS are no good for me, so I need something else.




 
umm.. www.kingpincooling.com....  it is a K|ngp|n card, and you will probably find that K|ngp|n forums provide much faster help.. also, this is a waterblock thread for the 980 Classified..  Overclock.net also probably has a lot more info on the Classified and K|ngp|n Classified Threads. 


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#438
cerealkeller
Superclocked Member
  • Total Posts : 201
  • Reward points : 0
  • Joined: 2008/10/01 00:44:13
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/03/01 17:32:38 (permalink)
Scarlet-Tech
cerealkeller
Anybody know where I can get BIOS that allow me to exceed the 125% power draw?  The Kingpin BIOS are no good for me, so I need something else.




 
umm.. www.kingpincooling.com....  it is a K|ngp|n card, and you will probably find that K|ngp|n forums provide much faster help.. also, this is a waterblock thread for the 980 Classified..  Overclock.net also probably has a lot more info on the Classified and K|ngp|n Classified Threads. 

I don't have a kingpin card, I have a classy. And since most of the people on this thread are water cooling, I figured this would be a good place to ask. I did go to overclock.net. I haven't gotten any replies yet and it's been several days. I did get a custom bios that wasn't bad from another user on here, but all I really need is to unlock the power limit. That BIOS didn't do that. In regards to the kingpin bios I referred to, there was a custom bios created by him for the classy. I tried it, but it's more geared towards benchmarking only, I'm looking for something a bit more versatile.

Intel i9 9900K 5.4 GHz Koolance CPU400 Water Block
EVGA Z390 Dark
32 GB G Skill Trident 4000 MHz G Skill RAM Cooler
EVGA RTX 3090 FTW3 Ultra (Optimus Block coming)
Samsung 960 Evo 1 TB
Seagate Fire Cuda 1 TB
EVGA 1600 P2 PSU
Pioneer BD-RW
Thermaltake Core W200 Super Tower
2 x Alphacool Nexxus Monsta 480x90mm Rads, 280x65mm Phobya Rad, 240x55mm Koolance Rad
2 x Koolance PMP450S 24v Pumps, 2 x 770ml Koolance Reservoirs, 12 x Corsair ML140s, 4 x Corsair SP120s, 8 x Corsair HD120s, 8 x Cooler Master Sickle Flow 120s
Windows 10
#439
siffonen
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2012/04/04 02:30:44
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/03/02 09:33:58 (permalink)
Actually, regarding which bios you have every oc software will allow you to raise power limit to 125%, but actually it is in wattage higher than stock bios 125%

Hopefully i get my block tomorrow, been waiting since release of classt.
#440
Crimson AL
iCX Member
  • Total Posts : 434
  • Reward points : 0
  • Joined: 2014/02/26 10:32:06
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/03/02 12:02:28 (permalink)
*please delete, wrong thread*
post edited by Crimson AL - 2015/03/02 12:18:32


#441
bogie89
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2013/10/21 05:31:07
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/03/04 04:37:50 (permalink)
any news about the wb for the kingpin card?
#442
Crueltism
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2015/03/02 11:15:18
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/03/04 04:48:15 (permalink)
Does this mentioned WB fits for the Kingpin card ?
#443
EK_Luc
EK Forum Support
  • Total Posts : 324
  • Reward points : 0
  • Joined: 2014/11/05 10:43:15
  • Status: offline
  • Ribbons : 2
Re: EVGA GTX 980 Classified waterblocks 2015/03/04 07:28:57 (permalink)
bogie89
any news about the wb for the kingpin card?



No recent news.
 
Crueltism
Does this mentioned WB fits for the Kingpin card ?



There will be a specific block for the KPE
 
#444
bogie89
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2013/10/21 05:31:07
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/03/05 03:33:29 (permalink)
any ETA?
approximately
#445
Stay Puft
iCX Member
  • Total Posts : 286
  • Reward points : 0
  • Joined: 2013/04/22 13:25:17
  • Status: offline
  • Ribbons : 1
Re: EVGA GTX 980 Classified waterblocks 2015/03/05 14:51:08 (permalink)
Two down... Two to go
#446
efilloon
New Member
  • Total Posts : 74
  • Reward points : 0
  • Joined: 2008/04/16 17:32:54
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/03/05 19:01:42 (permalink)
Thumbs up!! Puft! I have the same ones, Idle at 25c right now and BF4 in game at like 33c.....love it!!

EVGA X99 Classified
Intel 5930 4.329GHz (watercooled - Ek-Supremacy EV0 - (Original CSQ) Full Nickel)
32Gb Corsair Platinum Dominator 2800MHz
2 EVGA 980 Classified's (EK WBs)
512 Gb Samsung 850 Pro
Corsair 1000HX PSU
Corsair K70 Cherry MX Red RGB Mechanical Gaming Keyboard
Logitech G502 Proteus Spectrum
Sound Blaster Z PCIe Gaming Sound Card
Windows 10 Pro 64 bit
#447
Stay Puft
iCX Member
  • Total Posts : 286
  • Reward points : 0
  • Joined: 2013/04/22 13:25:17
  • Status: offline
  • Ribbons : 1
Re: EVGA GTX 980 Classified waterblocks 2015/03/05 20:05:43 (permalink)
Tomorrow is going to be a fun day
#448
Vlada011
Omnipotent Enthusiast
  • Total Posts : 10257
  • Reward points : 0
  • Joined: 2012/03/25 00:14:05
  • Location: Belgrade-Serbia
  • Status: offline
  • Ribbons : 11
Re: EVGA GTX 980 Classified waterblocks 2015/03/05 20:08:26 (permalink)
Stay Puft
Tomorrow is going to be a fun day




That look great. 
Both versions of blocks are nice. 

i7-5820K 4.5GHz/RVE10-EK Monoblock/Dominator Platinum 2666/ASUS GTX1080Ti Poseidon/SBZxR /Samsung 970 EVO PLus 1TB/850 EVO 1TB /EVGA 1200P2/Lian Li PC-O11WXC/EK XRES D5 Revo 100 Glass/Coolstream PE360-Noctua NF-A12x25 PWM x3
http://www.evga.com
http://www.intel.com
http://www.nvidia.com
https://watercool.de
http://www.lian-li.com
https://www.youtube.com/watch?v=PHMun5xiRe0
 
https://xdevs.com/guide/2080ti_kpe/#intro
https://www.evga.com/articles/01386/evga-sr-3-dark/
 
 
 

 
 
#449
kot0005
New Member
  • Total Posts : 75
  • Reward points : 0
  • Joined: 2013/09/30 20:37:05
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 0
Re: EVGA GTX 980 Classified waterblocks 2015/03/07 22:36:42 (permalink)
here is how to install the evga backplate with ek waterblock.
 
1. you will need to increase all of the backplate hole size using a 3.5mm diameter drill bit. Use a HSS bit for better and smooth results.
2. you need two 8mm M3 screws with nuts and some 6mm M3 screws.
 
Pics below.
 
Green =M3 x 8mm screws with nuts.
Red =Ek supplied screws with washers.
Yellow =M3 x 6mm screws.

 

#450
Page: << < ..1112131415.. > >> Showing page 15 of 16
Jump to:
  • Back to Mobile