HOWARD70
iCX Member
- Total Posts : 290
- Reward points : 0
- Joined: 2012/01/29 14:54:03
- Status: offline
- Ribbons : 1
Has anyone w 7xx series installed the new 347.25 driver yet, and if so how is it going? Only discsion i found about the driver was for the 9xx series.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: New Driver?
2015/01/22 22:34:14
(permalink)
There is a thread already opened on the new driver. You can probably get the information you are looking for by typing in 347.25 in the search box.
|
HOWARD70
iCX Member
- Total Posts : 290
- Reward points : 0
- Joined: 2012/01/29 14:54:03
- Status: offline
- Ribbons : 1
Re: New Driver?
2015/01/22 22:42:28
(permalink)
I saw the thread but the disc. seemed centered on the 9xx and the prob they were having w sli, was just wandering if any 7xx users hadgood/bad exp.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: New Driver?
2015/01/22 22:50:47
(permalink)
I haven't been able to load them yet. I will try them out tonight of possible.
|
_Nite_
Insert Custom Title Here
- Total Posts : 19175
- Reward points : 0
- Joined: 2007/04/18 15:35:04
- Location: Sumner, Washington
- Status: offline
- Ribbons : 46
Re: New Driver?
2015/01/23 00:13:07
(permalink)
The new drivers only gives support for the 960 release as well as a new type of AA mode so I didn't bother with them
Gaming Rig: AMD Ryzen 7 2700x @ 4.25Ghz - Asrock B450 Pro 4 - 16GB Crucial Ballistix DDR4 3000 - 240GB SSD (OS), 1TB ADATA SU800 SSD and 2TB ADATA SX8200 Pro M2 NVME (Games) - 8GB RTX 3070 XC3 Ultra - Sound Blaster Audigy 5 RX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: New Driver?
2015/01/23 01:27:32
(permalink)
Sajin said it fixed the issue with GPU usage dropping with SLI cards, so that is pretty significant for some.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: New Driver?
2015/01/23 02:40:23
(permalink)
I will not change driver at all.
|
bdary
Omnipotent Enthusiast
- Total Posts : 10330
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida
- Status: offline
- Ribbons : 116
Re: New Driver?
2015/01/23 06:14:40
(permalink)
I've been using it for playing ACU. So far it's been fine. No issue's.
|
ehau
SSC Member
- Total Posts : 691
- Reward points : 0
- Joined: 2004/07/06 06:01:30
- Status: offline
- Ribbons : 1
Re: New Driver?
2015/01/24 07:28:01
(permalink)
Been using it on Star Citizen and War Thunder, etc. No issues as well.
|
HOWARD70
iCX Member
- Total Posts : 290
- Reward points : 0
- Joined: 2012/01/29 14:54:03
- Status: offline
- Ribbons : 1
Re: New Driver?
2015/01/25 01:29:25
(permalink)
I loaded up the driver and my oc beacsme unstable, and I've had this oc for 6months rock solid. Anyone else exp. this?
|
bdary
Omnipotent Enthusiast
- Total Posts : 10330
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida
- Status: offline
- Ribbons : 116
Re: New Driver?
2015/01/25 07:25:48
(permalink)
HOWARD70
I loaded up the driver and my oc beacsme unstable, and I've had this oc for 6months rock solid. Anyone else exp. this?
This isn't uncommon when new drivers are released. New drivers sometimes have performance improvements and can cause a once stable OC to become a little unstable.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: New Driver?
2015/01/26 05:24:23
(permalink)
They are working well for me so far. 2 days in and will report back if I have any issues.
|
Grey_Beard
CLASSIFIED Member
- Total Posts : 2232
- Reward points : 0
- Joined: 2013/12/23 11:50:37
- Location: The Land of Milk and Honey
- Status: offline
- Ribbons : 10
Re: New Driver?
2015/01/26 21:44:41
(permalink)
No issues for me either. It's been since Saturday. Out of state until Wednesday evening and I will check. I expect there to be no issues.
|
HOWARD70
iCX Member
- Total Posts : 290
- Reward points : 0
- Joined: 2012/01/29 14:54:03
- Status: offline
- Ribbons : 1
Re: New Driver?
2015/01/27 19:46:42
(permalink)
So this driver dosnt like me! First I had to get rid of my OC and today my gpus wouldnt downclock, even in idle they stayed at 1045,typically they would downclock to 324. I unistalled prec then did a reinstall, no good, took msi AB off and did a clean install of prec( I even installed prec16, same thing), finally i went back to 344.48 and now they are downclocking to 324 like normal.
|
HOWARD70
iCX Member
- Total Posts : 290
- Reward points : 0
- Joined: 2012/01/29 14:54:03
- Status: offline
- Ribbons : 1
Re: New Driver?
2015/01/27 22:38:41
(permalink)
Its started doing the same thing! Im running the skyn3t bios for the 780ti and prec has my cards running at 1045 at idle. Its taken my idle temps from 25 to 31 degrees! Antone know how to fix this?
|
NordicJedi
EVGA Forum Moderator
- Total Posts : 12570
- Reward points : 0
- Joined: 2007/07/16 21:05:08
- Status: offline
- Ribbons : 77
Re: New Driver?
2015/01/27 23:48:10
(permalink)
HOWARD70
So this driver dosnt like me! First I had to get rid of my OC and today my gpus wouldnt downclock, even in idle they stayed at 1045,typically they would downclock to 324. I unistalled prec then did a reinstall, no good, took msi AB off and did a clean install of prec( I even installed prec16, same thing), finally i went back to 344.48 and now they are downclocking to 324 like normal.
What kind of monitor do you have? If your monitor is set to 144hz, it's not uncommon for the card to stay at max clocks. Dropping it to 120hz when not gaming would solve that issue.
|
HOWARD70
iCX Member
- Total Posts : 290
- Reward points : 0
- Joined: 2012/01/29 14:54:03
- Status: offline
- Ribbons : 1
Re: New Driver?
2015/01/27 23:51:00
(permalink)
Thank u for the quick reply! I've had a 144hrz monitor for as long as I've had the cards, y would it start now? Reset mm onitot to 129 htz and still not down clocking. Idk?
post edited by HOWARD70 - 2015/01/27 23:56:02
|
howdy2u2
FTW Member
- Total Posts : 1896
- Reward points : 0
- Joined: 2006/12/01 04:31:48
- Status: offline
- Ribbons : 6
Re: New Driver?
2015/01/28 03:40:14
(permalink)
☄ Helpfulby HOWARD70 2015/01/28 07:15:18
What's your "Power Management Mode" set to in nVidia Control Panel? Adaptive OR Prefer Maximum Performance?
|
HOWARD70
iCX Member
- Total Posts : 290
- Reward points : 0
- Joined: 2012/01/29 14:54:03
- Status: offline
- Ribbons : 1
Re: New Driver?
2015/01/28 06:50:13
(permalink)
I have power mgmt set to prefer max.
|
bdary
Omnipotent Enthusiast
- Total Posts : 10330
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida
- Status: offline
- Ribbons : 116
Re: New Driver?
2015/01/28 06:56:36
(permalink)
☼ Best Answerby HOWARD70 2015/01/28 07:15:28
If using "Prefer Max Perf" mode, anytime you have a 3D program (app) running, it will force your clock speed up from idle. Since you're using a "non factory" vBIOS, I can't be certain what might also be going on.
|
HOWARD70
iCX Member
- Total Posts : 290
- Reward points : 0
- Joined: 2012/01/29 14:54:03
- Status: offline
- Ribbons : 1
Re: New Driver?
2015/01/28 06:59:18
(permalink)
I just installed the synapse 2.0 software for my razor perifs. That runs in the background I'll try and disable it and see what happens.
|
bdary
Omnipotent Enthusiast
- Total Posts : 10330
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida
- Status: offline
- Ribbons : 116
Re: New Driver?
2015/01/28 07:04:54
(permalink)
HOWARD70
I just installed the synapse 2.0 software for my razor perifs. That runs in the background I'll try and disable it and see what happens.
Sounds like that could be the culptrit. Let us know if closing it out resolves your issue... 
|
HOWARD70
iCX Member
- Total Posts : 290
- Reward points : 0
- Joined: 2012/01/29 14:54:03
- Status: offline
- Ribbons : 1
Re: New Driver?
2015/01/28 07:14:27
(permalink)
Yup! I disabled synapse and took it off start up hit reset and the GPUs are down clocking like norm again. Thanks for the help guys, much appreciated.
|
bdary
Omnipotent Enthusiast
- Total Posts : 10330
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida
- Status: offline
- Ribbons : 116
Re: New Driver?
2015/01/28 07:17:10
(permalink)
HOWARD70
Yup! I disabled synapse and took it off start up hit reset and the GPUs are down clocking like norm again. Thanks for the help guys, much appreciated.
Sounds good...  Glad that resolved your issue.
|
NordicJedi
EVGA Forum Moderator
- Total Posts : 12570
- Reward points : 0
- Joined: 2007/07/16 21:05:08
- Status: offline
- Ribbons : 77
Re: New Driver?
2015/01/28 10:51:28
(permalink)
HOWARD70
Yup! I disabled synapse and took it off start up hit reset and the GPUs are down clocking like norm again. Thanks for the help guys, much appreciated.
Good call. The Synapse software is one of the few applications that need to be shut down in order to enable/disable SLI. I'll keep that in mind if anyone else has a similar issues.
|
Rigbuilder12
Superclocked Member
- Total Posts : 119
- Reward points : 0
- Joined: 2014/09/22 09:17:55
- Status: offline
- Ribbons : 0
Re: New Driver?
2015/02/01 08:49:44
(permalink)
HOWARD70
Has anyone w 7xx series installed the new 347.25 driver yet, and if so how is it going? Only discsion i found about the driver was for the 9xx series.
770 SC ACX Sli here, I've had issues with the 347 family of drivers, mostly just erratic driver crashes. Best luck so far with the 344.65 driver tbh and I've tried them all.
|
OGM3X
iCX Member
- Total Posts : 345
- Reward points : 0
- Joined: 2012/04/23 18:12:08
- Location: socal
- Status: offline
- Ribbons : 0
Re: New Driver?
2015/02/01 09:36:47
(permalink)
My 780ti likes 340.52 best 
|