EVGA

EVGA 750 TI SC "crashing after an hour"

Author
sykotikman
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2014/12/18 15:05:55
  • Location: UK
  • Status: offline
  • Ribbons : 0
2014/12/18 15:29:56 (permalink)
Hi all
Im new here so please be gentle ,
 
Im having a few problems with my card , EVGA 750 ti SC
I have been trying to over clock it a little bit , and all tho a run benchmarks (heaven on ultra ) for 30mins or so and it seems stable , no crashers at all, no driver stop working , all is fine.
but while playing a game (tomb raider) i can play for about an hour and then it crash's "driver stop's working" and reverts back to default
 
now im totally new to PC gaming and overclocking anything ,
but if don't ask then i won't know ,
 
so i have set the card to:
GPU clock offset +85 >which can reach 1404
MEM clock off set +20 which sits around 1156
no extra voltage , as i have read it is bad for the card and shortens the life of it ,
the temp of the card doesn't get any higher than 50'c
FAN speed is at 40%
 
what can i do to ,so that the card is over clocked and is stable for more than an hour ? please
 
few specs
i5 3470
W7
8gb ram corsair vengeance
asrock h61m-dgs
500w pcu
#1

6 Replies Related Threads

    the_Scarlet_one
    formerly Scarlet-tech
    • Total Posts : 24581
    • Reward points : 0
    • Joined: 2013/11/13 02:48:57
    • Location: East Coast
    • Status: offline
    • Ribbons : 79
    Re: EVGA 750 TI SC "crashing after an hour" 2014/12/18 15:59:53 (permalink)
    You can always go further on Memory compared to core. Try +100 memory, but pull the Core back down to +65.

    These cards only boost in +13 intervals, so that makes it "easy" to track when adding things up.

    If you are getting crash at any point, it is unstable, no matter what.
    #2
    sykotikman
    New Member
    • Total Posts : 4
    • Reward points : 0
    • Joined: 2014/12/18 15:05:55
    • Location: UK
    • Status: offline
    • Ribbons : 0
    Re: EVGA 750 TI SC "crashing after an hour" 2014/12/18 16:05:06 (permalink)
    Thank you Scarlet tech ,
    i will try adding more memory ,
    would adding  voltage help in the matter , or should i keep away from adding that ?
    #3
    sykotikman
    New Member
    • Total Posts : 4
    • Reward points : 0
    • Joined: 2014/12/18 15:05:55
    • Location: UK
    • Status: offline
    • Ribbons : 0
    Re: EVGA 750 TI SC "crashing after an hour" 2014/12/19 00:40:35 (permalink)
    What should i have more of , GPU clock offset or the  MEM clock off set ?
    is there a rule of thumb , when trying to overclock .
    i have read quite a bit and seen a few vidz , but they don't really say that there should be more than one of the other , ( unless i have totally mist it)
    or should there be roughly the same ?
    #4
    NordicJedi
    EVGA Forum Moderator
    • Total Posts : 12570
    • Reward points : 0
    • Joined: 2007/07/16 21:05:08
    • Status: offline
    • Ribbons : 77
    Re: EVGA 750 TI SC "crashing after an hour" 2014/12/19 01:28:57 (permalink)
    Ideally, you'd want to push both as high as possible.  With newer cards, performance tends to scale better with memory clock gains more so than gpu clock gains.  Since you want to overclock the gpu clock and memory separately, start with getting your maximum memory clock stable first, and then push the gpu clock higher.  
     
    More voltage can help with a higher overclock, but too much voltage can also make the gpu unstable.  Start first by seeing what you can get just by raising the power target to the max, and then raise the voltage a little bit from there, as you continue pushing the gpu clock.

    6012mhz on L/N2 
    5321mhz on L/N2
    5091mhz on air
    The Lightsaber
    The Emperor Reborn
    #5
    sykotikman
    New Member
    • Total Posts : 4
    • Reward points : 0
    • Joined: 2014/12/18 15:05:55
    • Location: UK
    • Status: offline
    • Ribbons : 0
    Re: EVGA 750 TI SC "crashing after an hour" 2014/12/19 06:55:12 (permalink)
    NordicJedi
    Ideally, you'd want to push both as high as possible.  With newer cards, performance tends to scale better with memory clock gains more so than gpu clock gains.  Since you want to overclock the gpu clock and memory separately, start with getting your maximum memory clock stable first, and then push the gpu clock higher.  
     
    More voltage can help with a higher overclock, but too much voltage can also make the gpu unstable.  Start first by seeing what you can get just by raising the power target to the max, and then raise the voltage a little bit from there, as you continue pushing the gpu clock.


    thank you , that make's a little more sense  to me ,
    i only have the option of changing the gpu and mem , as the power target is locked at a 100% which is at the max already .
    #6
    NordicJedi
    EVGA Forum Moderator
    • Total Posts : 12570
    • Reward points : 0
    • Joined: 2007/07/16 21:05:08
    • Status: offline
    • Ribbons : 77
    Re: EVGA 750 TI SC "crashing after an hour" 2014/12/19 10:11:48 (permalink)
    No problem.  Feel free to post your overclocking log here in the thread or in the Overclocking, Cooling, and Benchmarking section if you'd like to consider getting help pushing it higher.

    6012mhz on L/N2 
    5321mhz on L/N2
    5091mhz on air
    The Lightsaber
    The Emperor Reborn
    #7
    Jump to:
  • Back to Mobile