Re: Z97 FTW Bios 1 not working after Update (Windows 8.1)
2014/11/20 14:19:07
(permalink)
This is what you do to restore the bad side. Boot up on your good bios side using a bootable thumb drive with a good copy of the bios on it. Run the update utility and wait until the press Y message is up on your screen and then physically move the switch to the bad side and press Y. It will reflash the messed up bios. When it is done then you can remove the thumb drive and reboot. You'll want to reboot on the side you just flashed to insure that it took. You should leave the side with the lowest bios version alone, never flash it and only update the side with the higher version on it.
post edited by HRPuffnstuff - 2014/11/21 14:23:13
MSI MEG Z790 ACE, Intel i9 13900k, G.Skill Trident Z5 RGB 32gb 6600, ARCTIC Liquid Freezer III 420 ARGB in push/pull, Gigabyte RTX 4090 Gaming OC, EVGA Nu Audio, Samsung 990 & 980 Pro's, WD SN850X & Black hdd, EVGA Supernova 1300 G2, Windows 11 Professional, Thermaltake Level 20 XT w/Antec Prizm X 120mm argb fans