EVGA

EVGA Pro SLI Bridges!

Page: << < ..2627282930.. > >> Showing page 28 of 31
Author
python
iCX Member
  • Total Posts : 387
  • Reward points : 0
  • Joined: 2006/07/20 08:34:45
  • Status: offline
  • Ribbons : 1
Re: EVGA Pro SLI Bridges! 2014/10/19 09:17:38 (permalink)
100-2W-0021-LR
are these things sold out? seriously..offer something then don't make enough for the masses? come on man remove the cranium from the rectum lol

 
objective to reach 16k posts   

9700k @5.0ghz
asus z390 hero xi
Nvidia 4070
thermalright silver arrow sb-e
EVGA SUPERNOVA 1000 PS


schmorblatz
Superclocked Member
  • Total Posts : 147
  • Reward points : 0
  • Joined: 2014/05/01 07:29:50
  • Status: offline
  • Ribbons : 5
Re: EVGA Pro SLI Bridges! 2014/10/19 19:32:43 (permalink)
scare19
schmorblatz
The illuminated bridge is compatible with reference cards. Yours are not reference cards. This is probably the reason why it does'nt work : no circuitry for LED control. (AFAIK, the LEDs are under graphics card control, and the bridge needs the LED controller : the bridge is a passive component). In other words, if the graphics card is already illuminated (like ref cards), it works. If not, it does'nt.
 
This certainly is a Asus 770 issue, not a NVIDIA or EVGA bridge issue.


It's impossible because the illumination HAVE TO WORKS with all graphic cards of all brands



It does not have to work with all cards of all brands. NVIDIA only says it will work with all reference design cards. EVGA provides a compatibility list. Take a look at NVIDIA website. Also, have a look at EVGA website. Not all EVGA GTX 770 are in the HCL (compare with products page, and pay attention to GTX 770 with ACX cooler : some of their non ref cards are not listed : 03G-P4-3783-KR, 02G-P4-2776-KR, 04G-P4-3776-KR).
 
http://www.evga.com/articles/00766/
http://www.evga.com/Produ...orce+700+Series+Family
 
Known issue with non reference design cards.
 
 
 
 
post edited by schmorblatz - 2014/10/19 19:34:49

why make it simple when it can be complicated ????
 
rig 1 : Asus P9X79-E WS / i7 4930k / 3-way SLI EVGA 780ti / Quadro K2000 / watercooled / 3D Vision Surround / 3 x Samsung 2233RZ + HP ZR22W
rig 2 : Asus P9X79 WS / i7 4930k / 2-way SLI 770 / aircooled / 3D Vision / Samsung 2233RZ + Samsung 2232BW + HP ZR22W
rig 3, 4 5, etc. : uninteresting !
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA Pro SLI Bridges! 2014/10/19 20:03:44 (permalink)
python
100-2W-0021-LR
are these things sold out? seriously..offer something then don't make enough for the masses? come on man remove the cranium from the rectum lol


I have had no problems getting them off of Amazon. Have you glanced around there? My guess is possibly not, because they are on there right now, for less than EVGA offers them, with free shipping if you are a prime member.
python
iCX Member
  • Total Posts : 387
  • Reward points : 0
  • Joined: 2006/07/20 08:34:45
  • Status: offline
  • Ribbons : 1
Re: EVGA Pro SLI Bridges! 2014/10/20 06:44:07 (permalink)
Scarlet-Tech
python
100-2W-0021-LR
are these things sold out? seriously..offer something then don't make enough for the masses? come on man remove the cranium from the rectum lol


I have had no problems getting them off of Amazon. Have you glanced around there? My guess is possibly not, because they are on there right now, for less than EVGA offers them, with free shipping if you are a prime member.

u guess wrong..5 weeks out
got one off frozen pc.

 
objective to reach 16k posts   

9700k @5.0ghz
asus z390 hero xi
Nvidia 4070
thermalright silver arrow sb-e
EVGA SUPERNOVA 1000 PS


python
iCX Member
  • Total Posts : 387
  • Reward points : 0
  • Joined: 2006/07/20 08:34:45
  • Status: offline
  • Ribbons : 1
Re: EVGA Pro SLI Bridges! 2014/10/23 08:44:53 (permalink)
received..installed...cool! love it ;)

 
objective to reach 16k posts   

9700k @5.0ghz
asus z390 hero xi
Nvidia 4070
thermalright silver arrow sb-e
EVGA SUPERNOVA 1000 PS


Hymer
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2014/10/30 03:34:54
  • Status: offline
  • Ribbons : 0
Re: EVGA Pro SLI Bridges! 2014/10/30 03:37:40 (permalink)
Hello,
 
I have a MSI X99 gaming 9 AC and 2 980GTX SC ref cooler. which sli bridge should i buy? :)
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA Pro SLI Bridges! 2014/10/30 16:37:09 (permalink)
Sooooooooo, if im planning to use this board the Asus AMD Sabertooth 990FX/Gen3 R2.0 motherboard.
 
 
 

 
 
 
to install my 2 new 980 Classified ACX 2.0 IN SLI (white gen3X16 slots)
I will need to buy the 100-2W-0021-LR EVGA PRO (2-WAY) SLI bridge (or 2 for looks)'s
which are 60 mm spaced apart??
 
 
 
 

 
 
 
 
and does anyone know if the bridge will light up with the 980 classified's??
 
 
post edited by Pgcmoore - 2014/10/30 16:39:43

Attached Image(s)


   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA Pro SLI Bridges! 2014/10/30 17:15:52 (permalink)
python
Scarlet-Tech
python
100-2W-0021-LR
are these things sold out? seriously..offer something then don't make enough for the masses? come on man remove the cranium from the rectum lol


I have had no problems getting them off of Amazon. Have you glanced around there? My guess is possibly not, because they are on there right now, for less than EVGA offers them, with free shipping if you are a prime member.

u guess wrong..5 weeks out
got one off frozen pc.


So, you admit this could have been avoided, lol. Thanks for that. Obviously, they made enough, but you posted complaining you couldn't get one. They have been available all over, except on the EVGA website.
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA Pro SLI Bridges! 2014/10/30 17:16:43 (permalink)
Pgcmoore
Sooooooooo, if im planning to use this board the Asus AMD Sabertooth 990FX/Gen3 R2.0 motherboard.
 
 
 

 
 
 
to install my 2 new 980 Classified ACX 2.0 IN SLI (white gen3X16 slots)
I will need to buy the 100-2W-0021-LR EVGA PRO (2-WAY) SLI bridge (or 2 for looks)'s
which are 60 mm spaced apart??
 
 
 
 

 
 
 
 
and does anyone know if the bridge will light up with the 980 classified's??
 
 


The long bridge should be perfect.
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA Pro SLI Bridges! 2014/10/30 17:21:56 (permalink)
Thanks!

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
python
iCX Member
  • Total Posts : 387
  • Reward points : 0
  • Joined: 2006/07/20 08:34:45
  • Status: offline
  • Ribbons : 1
Re: EVGA Pro SLI Bridges! 2014/10/31 01:47:45 (permalink)
Scarlet-Tech
python
Scarlet-Tech
python
100-2W-0021-LR
are these things sold out? seriously..offer something then don't make enough for the masses? come on man remove the cranium from the rectum lol


I have had no problems getting them off of Amazon. Have you glanced around there? My guess is possibly not, because they are on there right now, for less than EVGA offers them, with free shipping if you are a prime member.

u guess wrong..5 weeks out
got one off frozen pc.


So, you admit this could have been avoided, lol. Thanks for that. Obviously, they made enough, but you posted complaining you couldn't get one. They have been available all over, except on the EVGA website.

didn't want to hunt them down when evga made them I would have thought they were readily available..even amazon were on back order...speaking of something that could have been avoided..so goes ur reply. ur first response implied I hadn't looked on evga or the market place..then amazon. (Edited out for Personal Attacks, and a link to a site that is inappropriate for the forums.)
post edited by XrayMan - 2014/11/01 01:19:00

 
objective to reach 16k posts   

9700k @5.0ghz
asus z390 hero xi
Nvidia 4070
thermalright silver arrow sb-e
EVGA SUPERNOVA 1000 PS


Hymer
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2014/10/30 03:34:54
  • Status: offline
  • Ribbons : 0
Re: EVGA Pro SLI Bridges! 2014/10/31 02:57:41 (permalink)
Which bridge should i use?

 
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA Pro SLI Bridges! 2014/10/31 05:11:30 (permalink)
python
didn't want to hunt them down when evga made them I would have thought they were readily available.. even amazon were on back order...speaking of something that could have been avoided..so goes ur reply. ur first response implied I hadn't looked on evga or the market place..then amazon. wow..ur a brainiac never thought of lookin there. thanks for that..an appropriate response would have been a link to where they were in stock such as

 
EVGA commonly sells out of accessories, as people save EVGA Bucks...  that means people were paying maybe 5.99 for shipping and nothing for the bridges, and they are a nice accessory to have, so if you aren't willing to hunt them down, why would you be willing to post in an open forum when they are readily available at an authorized retailer.. 

I asked if you had looked, shortly after you had posted. They were on Amazon when I asked, so I asked if you had looked since they were available, NOT on backorder. I even stated they were available when I posted it. Amazon.com is surprisingly easy to type in, and 99% of the world knows how to get there. Then type EVGA SLI bridge, and it amazingly shows up. You complained about it in the forums, so I figured you could do that after I said they were available, you would know how to get to amazon.  My apologies. This isn't daycare. Also, if you are in a foreign country, which doesn't show on mobile, the link wouldn't work for you, so you would have to search anyway.

Don't get upset, because I made a point of something that was obvious.

Implying something, as you did with the link that you so kindly posted which I won't share, is the same as just saying it. Be careful you don't get yourself yelled at by a mod. Everyone knows, we don't want them getting upset and editing our posts. :-)

P. S. If you have anything else to say, feel free to pm me. This doesn't need to be on the forum posts any further. 
post edited by Scarlet-Tech - 2014/10/31 05:48:48
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA Pro SLI Bridges! 2014/10/31 05:54:34 (permalink)
Hymer
Which bridge should i use?

 




 

 
When using Slots 1 and 3 (arrows) the long bridge will be perfect. This would be 60 mm spacing.   If you used slot 1 and 4, the center fingers of the 3 way bridge would not touch either card, but I am not sure if it works properly.
100-2W-0021-LR 
Also, Amazon is now out of stock, lol. (in reference to the discussion above.)
python
iCX Member
  • Total Posts : 387
  • Reward points : 0
  • Joined: 2006/07/20 08:34:45
  • Status: offline
  • Ribbons : 1
Re: EVGA Pro SLI Bridges! 2014/10/31 07:17:39 (permalink)
Scarlet-Tech
python
didn't want to hunt them down when evga made them I would have thought they were readily available.. even amazon were on back order...speaking of something that could have been avoided..so goes ur reply. ur first response implied I hadn't looked on evga or the market place..then amazon. wow..ur a brainiac never thought of lookin there. thanks for that..an appropriate response would have been a link to where they were in stock such as

 
 

I asked if you had looked, shortly after you had posted. They were on Amazon when I asked, so I asked if you had looked since they were available, NOT on backorder. I even stated they were available when I posted it. Amazon.com is surprisingly easy to type in, and 99% of the world knows how to get there. Then type EVGA SLI bridge, and it amazingly shows up. You complained about it in the forums, so I figured you could do that after I said they were available, you would know how to get to amazon.  My apologies. This isn't daycare. Also, if you are in a foreign country, which doesn't show on mobile, the link wouldn't work for you, so you would have to search anyway.

Don't get upset, because I made a point of something that was obvious.




lmao..I googled the part number...not evga bridge which eliminates any bulk crap I have to sort through..no one uses a google search better than I do, I use it at work all day..they were on back order then,just got an email last night stating they were in stock,ur first reply was...have u looked on amazon,my guess is probably not, what a joke,if that's how u want to respond to peoples questions we r all better off with a little more as for the rest of ur latest post with ur condescending  and tone..please refer to the website I linked u to.
 
(Post edited by Moderator for abbreviated foul language)
post edited by XrayMan - 2014/11/01 01:22:26

 
objective to reach 16k posts   

9700k @5.0ghz
asus z390 hero xi
Nvidia 4070
thermalright silver arrow sb-e
EVGA SUPERNOVA 1000 PS


the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA Pro SLI Bridges! 2014/10/31 10:13:42 (permalink)
Sent you a pm. As stated, this is wasting thread space.
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA Pro SLI Bridges! 2014/10/31 11:20:20 (permalink)
Frozen CPU has one left, just ordered the other 2 they had
Performance PCs has 1 but its $35
 
post edited by Pgcmoore - 2014/10/31 11:22:51

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
lhaygood
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2014/08/05 22:22:34
  • Status: offline
  • Ribbons : 0
Re: EVGA Pro SLI Bridges! 2014/10/31 15:55:18 (permalink)
I need the 100-2W-0022-LR (Short bridge). Can't seem to find it in stock anywhere, though. Anyone know a retailer?
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA Pro SLI Bridges! 2014/10/31 16:07:08 (permalink)

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
XrayMan
Insert Custom Title Here
  • Total Posts : 73000
  • Reward points : 0
  • Joined: 2006/12/14 22:10:06
  • Location: Santa Clarita, Ca.
  • Status: offline
  • Ribbons : 115
Re: EVGA Pro SLI Bridges! 2014/11/01 01:23:38 (permalink)
 
Just a reminder that Foul Language and Personal Attacks are not allowed.
 
 
                        *General Thread Warning*

            My Affiliate Code: 8WEQVXMCJL
 
        Associate Code: VHKH33QN4W77V6A
 
             
 
 
                  
 
 
 
          
 
   
 
           
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 



 
 
 
 
 
 &nbsp
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA Pro SLI Bridges! 2014/11/07 10:07:53 (permalink)

 
 
 
 
 
 
 
 
BACK IN STOCK!!!
 
for now anyway........

 
 
http://www.amazon.com/gp/..._s00?ie=UTF8&psc=1
post edited by Pgcmoore - 2014/11/07 10:11:25

Attached Image(s)


   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
Aelius
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2014/10/11 08:53:37
  • Status: offline
  • Ribbons : 0
Re: EVGA Pro SLI Bridges! 2014/11/17 08:18:46 (permalink)
I actually purchased an EVGA SLI bridge, only to discover that the Asus Rampage V Extreme (and other Asus X99 boards) are configured differently, with more space between the first and third slots. Is there an EVGA bridge designed for the new Asus board?
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA Pro SLI Bridges! 2014/11/17 10:24:43 (permalink)

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
Aelius
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2014/10/11 08:53:37
  • Status: offline
  • Ribbons : 0
Re: EVGA Pro SLI Bridges! 2014/11/17 10:29:24 (permalink)
Thanks, Pgcmoore, for the prompt reply.
That, in fact, is the bridge I ordered and while it is appropriate for the cards, it does not fit the slots on the ASUS board, which are more widely spaced.
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA Pro SLI Bridges! 2014/11/17 10:33:13 (permalink)
You should see 3 different ones in that link
 
also there are these./...  with a good guide to spacing.
 
http://www.geforce.com/ha...technology/sli/bridges
 
it sounds like you need this one...
 
 
http://www.evga.com/Products/Product.aspx?pn=100-3W-0031-LR
 
 
post edited by Pgcmoore - 2014/11/17 10:36:25

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
Aelius
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2014/10/11 08:53:37
  • Status: offline
  • Ribbons : 0
Re: EVGA Pro SLI Bridges! 2014/11/17 10:38:17 (permalink)
 
Thanks again, Pgcmoore, with apologies for replying in this forum and not to you directly. Of the three bridges, I had ordered the two-way SLI which, as I say, does not fit the cards as they are fitted on the Asus board, which itself does not seem to follow the configuration of other, earlier boards (as the Asus rep explained to me).
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA Pro SLI Bridges! 2014/11/17 10:40:57 (permalink)
if you can measure the distance between the sli slots (in mm) we can help you find what you need better.

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
Aelius
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2014/10/11 08:53:37
  • Status: offline
  • Ribbons : 0
Re: EVGA Pro SLI Bridges! 2014/11/17 10:46:50 (permalink)
In fact, I did measure the distance, which I provided to EVGA. It is exactly the distance between the first and third slot on the Asus three-way SLI bridge, which is to say, 3.25 inches. I did not use the three-way bridge, however, because I was not certain that it was appropriate for a two-way configuration.
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA Pro SLI Bridges! 2014/11/17 10:53:29 (permalink)
the long skinny one is 60mm apart. on the 2/3 way one each set is 40mm apart, if yours is 3.5 inches , thats,uuuuummmmmmmm  89mm?  so I think your out of luck. If they were 80mm apart the 2/3 way would work.

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
Aelius
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2014/10/11 08:53:37
  • Status: offline
  • Ribbons : 0
Re: EVGA Pro SLI Bridges! 2014/11/17 10:58:48 (permalink)
If I measure from the first set of pins in slot one to the first set in slot three, it is 81.5 mm. Although this may mean that I cannot use an EVGA bridge (at least for the time being), it does prompt me to ask if I actually CAN use the Asus 3-way bridge (using only slots 1 and 3) in a 2-way configuration.
Page: << < ..2627282930.. > >> Showing page 28 of 31
Jump to:
  • Back to Mobile