http://www.geforce.com/whats-new/articles/geforce-344-48-whql-driver-released
 
This update also adds DSR for Kepler and Fermi cards.

I don't play BF4 but i have been gaming in Cod MW3 & Ghosts for the past 2-3 hours and i have had no blue screens and gameplay was smoother than the 344.11 driver but no FPS increases for me.
 
The driver is working good for me....760FTW.

Hey Steve, why don't YOU test it in BF4 and get back to us? 

I've been playing alien isolation, styx, titanfall, star citizen this driver works great so far. But I have not benched with it yet..

Wow - still no profile for Shadow of Mordor...

garnetandblack
Wow - still no profile for Shadow of Mordor...

You Sure? I m currently playing shadow of mordor using the sli profile. Its under Middle Earth Shadow of Mordor

shafatNot sure what exact issue u were talking to but the only complains I've heard of are DSR not working properly with some SLI setups. Keep us updated as I would like to know about it as well.

 
Quite a few people were reporting that on system with 32 GB of RAM or more, that the 900 series cards were very unstable. Lots of crashing, even just on the desktop. Pulling out memory until less than 32 GB was in the system seemed to resolve the issue for people suffering from this. Supposedly it was acknowledged by nVidia and filed as a bug, so I'm curious if these drivers will fix it.
 
I'm hoping to wait until this issue is resolved before I install my GTX 980, as I run more than 32 GB of RAM.

The issue with the invisible mouse cursor after a Windows restart or cold boot seems to have been fixed in this driver. I've noticed, however, GPU temps increasing. Looks to be due to the GPU's core clocks exceeding its original GPU Boost clock. Even when reducing the max clock in Precision X, the temps still remain higher than they were in the previous driver. Temps went up to 78°C playing Titanfall (with a staggering 3.5 GB of VRAM in use). When playing NFS Rivals, which played smoothly at 60 fps with the core clock at 1000 MHz, the GPU now runs at 1400 MHz, which is overkill for that game and resulting in unnecessary heat and power usage. Anyone else experiencing the same issue?

OK, so despite the higher GPU temps, I suppose the latest driver improves GPU performance by scaling up the clock speeds. But it's weird, though, that even if I cap the clock speed to 900 MHz, the temps are still higher than with the previous driver. It's probably due to the higher voltages set by the latest driver. I compensated for the higher temps by increasing the max fan speed to 60%, which is noisier, but will have to make do. (There's no coil whine issue, anyway.) I ran a stress test by running Crysis 3 with almost all settings maxed for about 20 minutes and with the adjusted fan curve, the GPU temps failed to reach 70°C. It's surprising considering that Titanfall pushed it up to nearly 80°C with 50% fan speed. The ambient room temp is about 71°F this morning compared to 78°F yesterday afternoon. I'll have to run Titanfall later today with the higher fan speed and report my findings.

Do these new drivers affect Folding performace / PPD?

I am playing BF4, in SLI, with DSR to 4x. I don't get why people are asking about DSR and SLI, they work.

Also tested in D3 and WoW so far.

I'd suggest your SLI issue is a game related problem. 3 way 680's and they were 95%, 95%, 94% in BF4 @ 1080, 4x DSR, mix of highs and lows for crispness.

ph33x
I am playing BF4, in SLI, with DSR to 4x. I don't get why people are asking about DSR and SLI, they work.

Also tested in D3 and WoW so far.

I'd suggest your SLI issue is a game related problem. 3 way 680's and they were 95%, 95%, 94% in BF4 @ 1080, 4x DSR, mix of highs and lows for crispness.

From what I've seen around the various forums, the DSR/SLI issue is for the most part specific to those with G-sync monitors.

dbkams
question about the dsr setup...what smoothness setting have you guys found to work the best at 1920x1080? everything i try seems to come out pretty blurry lol

15%

dbkams

chrisdglong

dbkams
question about the dsr setup...what smoothness setting have you guys found to work the best at 1920x1080? everything i try seems to come out pretty blurry lol

15%

thanks ill give it a try

Zero was too sharp, default 33% too blurry. I decided to split the difference and it worked. 

Husky_

chrisdglong

dbkams

chrisdglong

dbkams
question about the dsr setup...what smoothness setting have you guys found to work the best at 1920x1080? everything i try seems to come out pretty blurry lol

15%

thanks ill give it a try

Zero was too sharp, default 33% too blurry. I decided to split the difference and it worked. 

What smoothness are you guys talking about? Is it like a setting in GeForce Experiance? What 15%? pleasae help as I am using DSR and some objects like text look blurry. 
 
Thank you.

I have it in the Nvidia control panel right under the DSR options. The default setting is too blurry.