BIOS 1.07 Updates

• Fix system halt with incorrect FIVR setting
• Improve memory compatibility
• Support CPU ratio with auto voltage table
• Improve USB compatibility 

  

---

 
Windows Installation

• Download the correct .zip file below for your motherboard:

         151-HE-E999-KR - EVGA X99 Classified
         150-HE-E997-KR - EVGA X99 FTW
         131-HE-E995-KR - EVGA X99 Micro

• First go into your BIOS and load defaults, save and exit
• Close all open programs.
• Go into the folder where you unzipped this package and update.bat
• Press Y to start the flash process
• DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
• After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
• NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

  
BIOS Installation

• Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
• Reboot the machine and go into the system BIOS

• From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
• Select the .bin file you wish to flash.

Sweet!! Finally!!

.....and another double post

updated to BIOS 1.07
 
Still have issues with Graphics card PCI-E detection. Bios shows Gen.1 Windows event viewer shows this.
 
A corrected hardware error has occurred.
Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)
Bus:Device:Function: 0x0:0x2:0x0
Vendor ID:Device ID: 0x8086:0x2f04
Class Code: 0x30400
The details view of this entry contains further information.
 
 
Nvidia drivers stop responding, and I have random computer freeze issues. Sometimes system works for a few hours, sometimes its like 2 minutes. Not sure what to try. Any suggestions ? Everything is stock settings, using XMP profile 1 for RAM. Did a fresh install of windows 7 when I installed the board.

This bios hasn't accomplished anything as far as I'm concerned. Tried to run the my corsair memory at xmp 2800 and I blue screen and it overclocks the blk setting to 126 which overclocks my cpu to 4.0.  I cant seem to run my memory at 2800 while the blk is at 100.
 
also, still getting PCIe 3.0 errors (you know which thread is started), sound card won't be recognized unless i manually set it to pcie 2.0

First of All, I must acknowledge MANY Thanks for All the Hard Work at the Staff of EVGA in Solving This particular BIOS Problem!
 
After Consulting last night and being contacted by Jacob who has sent me a Few Special BETA BIOS's to try out, But that have NOT BEEN OFFICIALLY RELEASED Due to ongoing Testing with the Techs at EVGA, I am Happy to report I have found one that works and FINALLY have been able to Enable 4-Way SLI using four EVGA 980 SC's on my EVGA X99 Classified Motherboard!

 
I Do Not know When EVGA will Officially Release this Updated BIOS as of Yet, But I am Sure it will be available soon.
 
Here is a Bench on 3DMark Fire Strike Extreme using 4-Way SLI with four EVGA GTX 980 SC's on my EVGA X99 Classified at Factory Stock Settings.
 

hallowen
First of All, I must acknowledge MANY Thanks for All the Hard Work at the Staff of EVGA in Solving This particular BIOS Problem!
 
After Consulting last night and being contacted by Jacob who has sent me a Few Special BETA BIOS's to try out, But that have NOT BEEN OFFICIALLY RELEASED Due to ongoing Testing with the Techs at EVGA, I am Happy to report I have found one that works and FINALLY have been able to Enable 4-Way SLI using four EVGA 980 SC's on my EVGA X99 Classified Motherboard!

 
I Do Not know When EVGA will Officially Release this Updated BIOS as of Yet, But I am Sure it will be available soon.
 
Here is a Bench on 3DMark Fire Strike Extreme using 4-Way SLI with four EVGA GTX 980 SC's on my EVGA X99 Classified at Factory Stock Settings.
 

That's sick! Glad to hear EVGA personally helped you out! From reading through the forums I knew you were having some issues. I wanted to get 3 980's as I am currently running 2 "original" gtx titans (still like that it has 6gb of vram). Unfortunately I am not made of money and dropped roughly $1500 to upgrade to x99 coming from and AMD FX-8350 that I had been using for a couple of years. So upgrading GPU's was out of the question. I'll wait until the next generations of cards to come out, that way I can buy 4 hydrocopper cards and put them in my loop. How do you like the 980's by the way?

i am still getting XMP Profile not supported message in bios......is G.Skill that off brand that Evga does not care to update this?

Alright guys, my memory works fine at 3000 Mhz and my 5960X Cpu operating at 4.250Ghz. Everything stable, thanks EVGA team.

Thanks, we will fix that.

hello guys,
I have x99 FTW and I have a problem with my soundcard asus xonar dx. It seems to be installed, but it doesn't work, no sound. The problem is known( I red it on other forums). It's an issue of x99 I suppose(a red about other soundcards, on other motherboards). Enterin the sleep mode and wake up again solve partially the problem(I have 5.1 sound system, but 2 satelites don't work). Is there a BIOS on the way to solve this problem?
Thank you

Any news on the next update trying to get 3 way SLI to work with 3 980sc. Bios show three but no go in windows.
X99 Classy with a I7-5930k.
 
Edit: got it to work just had to reset to defaults, then go back in and but all my settings in. Got it to work after setting pcie to gen 3 on the three slots.