Plexi bridges are now for sale!

 
As our new EK-HDC fittings!

Hey everyone! We're giving away 20 EK T-Shirts and 20 10% off discount codes! All you have to do is comment here and fill out our short survey!

http://goo.gl/l5sCzT

Bump

Got in touch with Support, and ordered the plexi tops.  As I requested from Support, and never heard back on this topic, that EK would benefit from looking to make Multicard Plexi Terminals, Especially a Parallel terminal that has a port on the bottom as well as the side. 
 
Also, I mentioned to Peter when I spoke with him, that the Clear Ek Koolant, turns yellow when left out in a room or used in a system.  I had never seen this before, and noticed that the coolant was yellow when I replaced it the first time I changed my system.  Now, I have 3 bottles, 2 of which I have had just over a month and one brand new that just came in, and I realized that 2 of the bottles are very obviously yellow.  I am not complaining about this, as when I ordered the Plexi tops, I mentioned this to Peter, and he said new ones would be sent out to replace them.  I am just trying to post a warning for others, that the clear coolant may look off over time.  Just in case anyone is curious, yes, I poured it into a clear cup, and it maintains its yellow color, No it is not the bottle changing colors.
 

No worries Derick. I got really mad at Ek the very first time. I purchased a block because my 4770k was running really hot, and Peter helped me get it cooled down by suggesting a delid or RMA of the chip, and since that moment, I have been thoroughly impressed with all of the help you guys provide. I did forget to request the pricing for a plexi cpu block, so I am going to find one to order so I can get everything showing some color. :-)

EK_Derick
:)
http://www.frozencpu.com/...grade_Kit_-_Plexi.html

 
No lie, I clicked it and immediately thought... that is the Evo, not the standard Supremacy... then I read the first line, "To upgrade the supremacy block over to the Evo..."  :-D  That is FANTASTIC that EK did that!  I have to say, Very well done. 
 
Now, can you tell them to work on the Parallel Terminals in Plexi :-D...  That will be the only thing that I will need to transition here soon. I will keep the Nateman blocks Black, because it is his signature.

EK_Derick
Plexi terminals are still a WIP.

 
You made my day!!!!!!  I will gladly pay to test one of the first ones ;-) Basically, I want to call Dibs on a triple Plexi Terminal right Meow.  the ONLY thing I request, is a port on the very bottom so that I can use my Probe it Cable in all three GPUs at once, and make sure they aren't going to overvolt too high.

Good to know. I may order one of the upgrade kits that they offer.

EK_Derick
Turns out we might actually have them next week, maybe sooner :)

The Terminals?  I am seriously going to hawkeye the sites to purchase one as soon as they hit.  I need to replace a 90 degree fitting at the same time, because I have a leaker, lol.  Thank you Derick.

vsg28
Saw a survey from EK pop up a few minutes ago: https://www.surveymonkey.com/s/EK-Hardware-Survey
 
5 shirts to be won apparently, so why not?

Great find.  I like the Waterblock porn on each page. I don't need a shirt, as they won't ship it to me, but I definitely filled in the survey.

Any Chance of there being a parts list for EOL blocks like the EK EVGA X58 Classified Full board blocks?  I have three of these blocks that are missing hardware and need new TIM pads and was wondering if there were parts kits available or at the very least a listing of all the hardware specs to get them refitted again.

Check out their cooling configurator (http://www.coolingconfigurator.com/) for info on specific blocks. If there's no info, as with the x99 Classified, then there are usually no plans for the blocks.

davestune
 I have a question.
I have 2 FC980 GTX  sexy looking blocks btw :)
 
Anyway how should I set the blocks up for watercooling series or parallel
1st time water cooling here and went all out on it.
 
is there only 1 way to hook them up?
a diagram on hooking them up would be great also
 
another question, when I put those little pads on, am I to put some thermal compound on the pads also?
 
Im going to use noctura n1 compound so let me know on that
Thanks EK and btw love that evo full nickel cpu block also
 
 

Think about the loop. The GPU loop usually works best with input away from the CPU and exit close the CPU. If on it own loop than does not matter. If you do one loop for everything flow will allow for good temps, but the CPU should be before GPU. If you are using a bridge, I like serial not parallel, but this is personal. A strong water flow can keep tempos in line, but I would never but a CPU after the GPUs, my personal preference.

EK_Derick
Plexi bridges are now for sale!

 
As our new EK-HDC fittings!

Ordered and installed these a few weeks ago. They look awesome. My only issue is that they don't come with the silver screws that are pictured. I have 3 780 classy blocks that come with the black screws. Is there a way to order the correct screws for these terminals in silver. I can live with the black, but I would just prefer the silver.
 
Pic of these installed:

Thanks. I have a hobby shop nearby that I use for my mods, Just wondering if EK has some that are specific to this upgrade. The silver just look so much better.