sl1pkn07
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2014/07/14 02:12:08
- Location: Spanishtán
- Status: offline
- Ribbons : 1
Hi I need set my ram (G.Skill F3-12800CL9-4GBRL) to 1600 (stock), if possible, with zero, or at least, minimum OC (when i say minimum, is a minimum) in my old giga ex58-ud5 is than easy like set the XMP profile, but in the SR-2 bios A58 i'm completly lost any help? my config SR-2 A2 - bios A58 6x4Gb G.skill F3-12800CL9-4GBRL (2x set F3-12800CL9-12GBRL) 2x Xeon X5650 SLBV3 , both Costa Rica greetings
post edited by sl1pkn07 - 2014/08/27 12:08:13
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 08:21:33
(permalink)
Highest setting you have is the 1333 then you have to go to the cpu setting that says Auto and type in the number that gives you the 800 mhz on the memory while it raises the overclock on the chip. Look on this forum for screen shots of guys with the 5650 because there are things you will probably turn off like turbo etc to get where you want to be.
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
sl1pkn07
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2014/07/14 02:12:08
- Location: Spanishtán
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 13:17:28
(permalink)
Hi I've tried this config (oly change the timmings to 9-9-9-24 and Vdimm to 1.5v (memory stock specs) http://hardforum.com/show...7221&postcount=561 test failed :( Boot OK, the memtest show ddr3-1600 and test without problem. but when boot my SO (linux) and test linpack 64bits (https ://software.intel. com/en-us/articles/ intel-math-kernel-library-linpack-download) over 16Gb, when press the Enter key, the machine freeze instantly (and reset button takes time until to responds) any help? greetings :( edit: fix link
post edited by sl1pkn07 - 2014/08/29 07:06:27
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 13:26:36
(permalink)
Yes do not try for 800 mhz on the ram right away, just set it for 1333 with no turbo on the cpu and stock cpu clock to boot it up, after this has worked you can then slowly increase your FSB (cpu clock), because it is probably not your memory failing but the config of your overclock on the cpu. You have to take your time and build up to be stable.
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
sl1pkn07
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2014/07/14 02:12:08
- Location: Spanishtán
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 14:26:57
(permalink)
Hi now test this configuration (untouch) https://www.youtube.com/watch?v=wpGj9vBGDI8 works OK, memtest says 1600 and the SO boot ok... but when run linpack literally burn the CPU1!!!
└───╼ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +93.0°C (high = +80.0°C, crit = +96.0°C)
Core 1: +92.0°C (high = +80.0°C, crit = +96.0°C)
Core 2: +87.0°C (high = +80.0°C, crit = +96.0°C)
Core 3: +86.0°C (high = +80.0°C, crit = +96.0°C)
Core 4: +94.0°C (high = +80.0°C, crit = +96.0°C)
Core 5: +95.0°C (high = +80.0°C, crit = +96.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 0: +43.0°C (high = +80.0°C, crit = +96.0°C)
Core 1: +51.0°C (high = +80.0°C, crit = +96.0°C)
Core 2: +39.0°C (high = +80.0°C, crit = +96.0°C)
Core 8: +56.0°C (high = +80.0°C, crit = +96.0°C)
Core 9: +49.0°C (high = +80.0°C, crit = +96.0°C)
Core 10: +45.0°C (high = +80.0°C, crit = +96.0°C)
this is unacceptable for me :S any sugestion to down CPU to 3.2 or less with save the DDR 1600? greetings
post edited by sl1pkn07 - 2014/08/29 07:06:43
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 16:08:38
(permalink)
Get a screen shot of CPU-Z
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
sl1pkn07
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2014/07/14 02:12:08
- Location: Spanishtán
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 16:33:19
(permalink)
I dont have windows. only linux
searching a cpu-z alternative...
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 16:54:45
(permalink)
Ok some things I need to know;
Where do you have the ram placed? 3 sticks on each cpu? And if so in the red slots? Some people do as the manual says and use the first three on each cpu and some do the red slots.
What volts do you have the cpu at?
Do you have turbo off?
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
sl1pkn07
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2014/07/14 02:12:08
- Location: Spanishtán
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 17:22:06
(permalink)
@cuda-dude, see the video in post above. use that config. untouched any settings. yes, the memos sticked on red banks (like manual) triple channel, 3 each core the system run OK at all stock (2.66, ram at 1333, etc). build chromium (takes 37min), Qt5, (takes 30min), and etc without any problem. but when try set to 1600 without make a +4Ghz overclock (like 3600 or less)... in first try gets a POST cicle of the death (always restart) hardforum page 9 - SR2 optimization thread
3.8Ghz 190BCLK x 20 multiplier, Turbo and SpeedStep disabled, newer A47 BIOS
VDroop: WITHOUT Vdroop
VCore: Auto
VTT: 1.375
DRAM Voltage: 1.60V
DRAM: 2:8 / 1066mhz > 1560Mhz, 9-9-9-24-86-2T
IOH: 1.375
QPI: 4.8GT/s
Uncore: x12 (1600mhz)
MCH Strap: 1600mhz
in the second try (see 3rd post) mentest and boot ok, but linpack crash system instantly when press Enter to start. hardforum page 27 - SR2 optimization thread
Bios settings
Frequency/Voltage Control - main screen
CPU Frequency - 200
PCIE Frequency - 101
CPU Multiplier - 18
QPI Frequency - 4.800GT
Memory Frequency - DDR-1066
MCH Strap - Auto
CPU Uncore = 18x
CPU Configuration screen
Max CPUID Limit - Disabled
Coherency Support - Disabled
A20M - Disabled
Speedstep - Enabled
Turbo - Enabled
C-State - Disabled
ACPI T State - Disabled
Everything else is Enabled
Memory screen
8-8-8-24 - auto the rest -> change to 9-9-9-24
Voltage
VDroop (both) - Without VDroop
Vcore (all) - 1.350 V
Vtt (all) - 1.350 V
Memory CPU0 - 1.65 V -> change to 1.50v
Memory CPU1 - 1.65 V -> change to 1.50v
IOH - 1.400 V
Turn off NUMA under Power Management
Signal Tweaks screen
IOH QPI 0 = Auto
IOH QPI 1 = Auto and the last try, settings like a video, Memtest ok and Boot Ok. linpack works OK, but the CPU1 gest a hot like a Evil (see temps above)
post edited by sl1pkn07 - 2014/08/27 18:22:47
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 17:32:46
(permalink)
Bios settings
Frequency/Voltage Control - main screen
CPU Frequency - 200 **change to 166
PCIE Frequency - 101** change to 100
CPU Multiplier - 18
QPI Frequency - 4.800GT
Memory Frequency - DDR-1066 ** change to 1333
MCH Strap - Auto
CPU Uncore = 18x ** change to auto if possible
CPU Configuration screen
Max CPUID Limit - Disabled
Coherency Support - Disabled
A20M - Disabled
Speedstep - Enabled** Disable
Turbo - Enabled8** Disable
C-State - Disabled
ACPI T State - Disabled** Change to enable
Everything else is Enabled
Memory screen
8-8-8-24 - auto the rest -> change to 9-9-9-24
Voltage
VDroop (both) - Without VDroop
Vcore (all) - 1.350 V** Change to 1.325 (And that may still be too much to run cool)
Vtt (all) - 1.350 V** Change to 1.325 (And that may still be too much to run cool)
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 17:39:24
(permalink)
If with those settings I just wrote it is not stable then bring the 166 down until it is stable. Then you can decide what to try next to get it stable.
Try to find the highest clock rate that it is stable under 1.32 V. With the memory in a slow state I.E. 1066 setting, after you have the cpu at it's best clock then you can raise the ram to 1333 to see if it's still stable. I do one cpu at a time to find out what each can do then I run them together and start at the beginning.
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
sl1pkn07
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2014/07/14 02:12:08
- Location: Spanishtán
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 18:12:33
(permalink)
ok. your config works for OK (only I change the Speedstep to enable. when not use the system save a lots of watts) memtest say 1600 (yahooo!!) and the cpu gets +/- 3Ghz (great!). tha system boot OK, and the linpack runs without problem the temps is:
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +79.0°C (high = +80.0°C, crit = +96.0°C)
Core 1: +76.0°C (high = +80.0°C, crit = +96.0°C)
Core 2: +73.0°C (high = +80.0°C, crit = +96.0°C)
Core 3: +72.0°C (high = +80.0°C, crit = +96.0°C)
Core 4: +78.0°C (high = +80.0°C, crit = +96.0°C)
Core 5: +80.0°C (high = +80.0°C, crit = +96.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 0: +35.0°C (high = +80.0°C, crit = +96.0°C)
Core 1: +35.0°C (high = +80.0°C, crit = +96.0°C)
Core 2: +32.0°C (high = +80.0°C, crit = +96.0°C)
Core 8: +33.0°C (high = +80.0°C, crit = +96.0°C)
Core 9: +37.0°C (high = +80.0°C, crit = +96.0°C)
Core 10: +36.0°C (high = +80.0°C, crit = +96.0°C)
damm CPU1 (yes, is the CPU1, when pass the hand over the fan, the airflow is hot, in the CPU0 the airflow is cold) thanks at lot! a little question *CPU Uncore = 18x ** change to auto if possible -> why you say this?. i set to auto. need set to 18? *(And that may still be too much to run cool) -> what is a limit to down? greetings
post edited by sl1pkn07 - 2014/08/27 18:19:38
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/27 21:40:28
(permalink)
If it runs ok at those settings , start dropping the vtt, core voltage to lower the temps until it wont be stable to learn what the cpu needs, those temps are high even on air.
Thanks
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
sl1pkn07
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2014/07/14 02:12:08
- Location: Spanishtán
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/28 17:00:55
(permalink)
tested with: (clear cmos and only set this changes) Bios settingsCPU Frequency - 160 CPU Multiplier - 17 Memory Frequency - DDR-1333 Speedstep - Enabled Turbo - Enabled 9-9-9-24-1T VDroop (both) - Without VDroop Vcore (all) - 1.15v Vtt (all) - 1.2v Linpack failed (restet machine) at 10hours of work (with normal use, include build programs) any ideas? :S test now with Vcore 1.15625v greetings
post edited by sl1pkn07 - 2014/08/28 17:03:02
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/28 20:07:24
(permalink)
All I can tell you is that for me stable overclocking on the SR-2 does not work well with using the Turbo and Speedstep.
Now it looks like your vcore is to low.
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/28 20:09:39
(permalink)
Raise the vtt also (go in small steps up)
And turn the memory to 2T until you get some stability going.
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
sl1pkn07
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2014/07/14 02:12:08
- Location: Spanishtán
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/29 06:10:26
(permalink)
Hi "Now it looks like your vcore is to low." "Raise the vtt also (go in small steps up)" you can explain why? I only make +60MHz OC to get mems works at 1600 in the stoks, the Vcore CPU0/CPU1 say 1.07500v/1.11875v Vtt 1.2000v. (all automatic) greetings EDIT: linpack with 1.15625v finished successfully http://sl1pkn07.w t f/paste/view/913ect f9ca yes. my domain is W.T.F (without dot), problem? xd
post edited by sl1pkn07 - 2014/08/29 08:42:13
|
cuda-dude
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2014/08/10 00:38:14
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/29 14:18:35
(permalink)
I don't have your exact chip so I do not know what Intel says is the range, you can not trust the bios settings as always correct. Look up your chip and adjust if needed.
EVGA Sr-2 w58 bios xeon x5690 x 2 evga GTX 780 ti Kingpins x4 sli clocked on H20 to 4.3 48 gig Corsair 1600 ram Geekbench 34475 Windows 8.1 x64 Geekbench 36660 Linux Generic Kernel x64 3Dmark 11 Performance 26393 #1 x5690 Record 3Dmark Fire Strike Extreme 14775 3Dmark Fire Strike Ultra 10953 3dmark Fire Strike 25315
|
sl1pkn07
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2014/07/14 02:12:08
- Location: Spanishtán
- Status: offline
- Ribbons : 1
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/08/31 10:10:24
(permalink)
|
gordan79
SSC Member
- Total Posts : 531
- Reward points : 0
- Joined: 2013/01/27 00:17:36
- Status: offline
- Ribbons : 3
Re: Gets set ram to 1600 (stock) whit a zero (or minimum) overclock
2014/09/01 01:00:37
(permalink)
You need to either go watercooled or disable turbo boost and reduce the multiplier. Also note that "auto" CPU voltage goes very high as soon as you apply any OC to any component. There is likely a lot of scope to reduce heat by reducing vcore.
Supermicro X8DTH-6, 2x X5690 Crucial 12x 8GB x4 DR 1.35V DDR3-1600 ECC RDIMMs (96GB) 3x GTX 1080Ti Triple-Seat Virtualized With VGA Passthrough (KVM)
|