My first mod and I thought I would share.
Here is after my first cut. Had to buy some thicker discs.
I got both sections cut out.
Outlined the window shape on the plastic sheet then I scored the acrylic on those lines.
Prepared the scored acrylic in the makeshift vice.
making sure the acrylic sections fit.
Removed the masking tape.
checked to edging for correct thickness
good ol' carpenters glue and masking to tape to hold the edging.
double sided foam tape and attached the acrylic.
all done other than lower window.
Originally I was not going to do the lower window so I only purchased 4 feet. I just ordered another foot so I can complete it. Anyways for my first mod I am please still need to clean up the edging and excess glue Il get to that when I get the edging. I will also buy a Bitfenix Alchemy LED strip to light it up eventually.
CPU: Intel® Core i7-6700K OC @4.6GHz
GPU: EVGA GeForce GTX 1070 SC
RAM: 16GB G.Skill TridentZ @ 3600MHz CAS 16
SSD: Samsung 850 Pro 240GB
HDD: Seagate 2TB 7200 RPM SSHD
---------------------------------------------------
Headset: Astro A40
Mouse: Logitech G502 Spectrum RGB
Keyboard: Corsair K70 Cherry MX Red