Re: Ignoring SSD on Sata 0 and trying to boot from Archive Drive on Marvell
2014/07/25 11:38:43
(permalink)
☼ Best Answerby NickNasc 2014/07/25 11:52:11
If you're setting your boot priority correctly and it's not following that priority, than I would reset the bios and if that does fix it, you will probably need to contact customer support. Double check t make sure both the both set for AHCI and and the device boot priority is set for the drive you want and the rest of the priorities disabled:
1st Boot - DVD ROM
2nd Boot - USB Key
3rd Boot - Hard Disk (Device on the intel controller, not the Marvell device)
Disabled
Disabled
Disabled
Disabled
Disabled
If this doesn't work, I would contact customer support or wait a proper answer here I guess... Also, what happens when you disable the marvel controller, does the SSD show up? If it does can you select it and turn the marvell controller back on? What happens then?
|| MM Ascention Case | Gigabyte GA-Z97X Gaming 7 | Intel Core i7-4790K | G.Skill Ripjaws Z 16GB 2x8 | EVGA GTX 780ti | Samsung 840 EVO 500GB | Tagan BZ Series 1300W | 480 Dual Rad 1/2 ID GPU Loop & 320 Dual Rad 1/2 ID CPU Loop | CPU: 4.8Ghz @ 1.26V & 60C on MaxLoad | RAM: 2400Mhz @ 1.65V | GPU: +400Mhz Core, +500Mhz Mem @ +75mv & 35C on MaxLoad ||