Hi All-
I recently received and installed 3 new EVGA Titan Black Hydro Coppers into my rig. Things seem to be going good until I decided to run some benchmarks. At stock settings, my 3 cards are hitting 3 different levels of peek voltage. What is more alarming, is when I add the max allowed voltage via Precision X (not 15), I get the following at full load on my cards.
Titan Black #1 - 1.212v
Titan Black #2 - 1.200v
Titan Black #3 - 1.162v
Again, that is what I get a full load when applying the max voltages allowed via Precision. I was under the belief that when applying the max Voltage to a card, the card should go up by that amount and it seems like my card, especially #3 does not do this. At stock, card 3 shows a 1.152 max voltage at full load, so it is only going to 1.162v at max voltage, which sounds odd.
Of course, with 2 cards hitting above 1.200v, I am limited to my OC them further since card #3 only goes to 1.162v. Is this a defect? I checked and all 3 cards are running the same bios.
Can someone at EVGA please help out with this as these are $1400.00 cards x3, I want to make sure I don't have a dud of a card.
Thanks for any and all help.
-Hawk269
>>>View Mod-Rigs to the left for System Specs<<<