altanore
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2009/09/13 16:35:30
- Location: Vancouver, B.C. Canada
- Status: offline
- Ribbons : 0
Hello everyone! I am currently sporting an 132-BL-E758-A1 board with an i7-920 OC'd to 3.8GHZ. While the i7-920 is an awesome CPU still, I am seeking a little more life out of my older hardware by upgrading to an Xeon L5639. I know my board does not support this CPU out of the box and requires a modification. I've found this image of what I need to mod (attached). I just can't seem to find that it works for sure with 1.0 revision. Anyone know? Thanks! 
post edited by altanore - 2014/04/23 23:27:17
Attached Image(s)
|
hallowen
CLASSIFIED ULTRA Member
- Total Posts : 5644
- Reward points : 0
- Joined: 2008/06/18 15:38:00
- Location: In a Galaxy Far, Far Away...
- Status: offline
- Ribbons : 14
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/04/24 04:58:53
(permalink)
ASUS: Rampage VI Extreme | i9-7940X | 2X RTX 2080 Ti Kingpin SLI | 32GB DDR4 3200MHz Memory - SAGER: NP9870-G | i7-6700K | GTX 980M 8GB | 64GB DDR4 | 950 PRO M.2 512GB | 17.3 QHD 120Hz Matte G-Sync | Prema bios - EVOC Premamod: P870TM1 | i9-9900K-LM | RTX 2080N 8GB | Modded Vapor Chamber | 32GB 3000MHz Ripjaws | 960 EVO M.2 1TB | 17.3 3K QHD 120Hz Matte G-Sync | Intel 8265 -
|
altanore
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2009/09/13 16:35:30
- Location: Vancouver, B.C. Canada
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/04/24 18:33:43
(permalink)
I did read one of those threads but from what I got from it, Rev 1.2 simply supports it out of the box where as the earlier revisions do not. I Have not read anywhere that they were not moddable. I did read of someone having success using the picture I attached but he/she did not say if the board was Rev 1.0 or 1.1. I think I'll just give it a shot. Worst case scenario is that it doesn't work and I'll just have to resell the Xeon. 
|
NordicJedi
EVGA Forum Moderator
- Total Posts : 12570
- Reward points : 0
- Joined: 2007/07/16 21:05:08
- Status: offline
- Ribbons : 77
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/04/28 17:54:20
(permalink)
Keep in mind that modding the board will void your warranty. If the board is still under warranty, EVGA can take your board and mod it for you, so you don't have to worry about your warranty.
|
altanore
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2009/09/13 16:35:30
- Location: Vancouver, B.C. Canada
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/05 22:26:43
(permalink)
I am happy to report that I successfully did the mod (it was a bit challenging for such a small component) and the motherboard is happily running an Xeon X5660! 
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/05 22:29:07
(permalink)
altanore
I am happy to report that I successfully did the mod (it was a bit challenging for such a small component) and the motherboard is happily running an Xeon X5660!
Congrats. 
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A   
|
dakiel
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2010/07/25 04:31:03
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/11 16:49:35
(permalink)
So to perform this, you simply short the two points indicated by the arrows right?
|
altanore
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2009/09/13 16:35:30
- Location: Vancouver, B.C. Canada
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/12 18:34:49
(permalink)
dakiel
So to perform this, you simply short the two points indicated by the arrows right?
No, what I did was detach the component that was on R538 and attached it to R539. The component is super tiny and stubborn to detach. Made harder with the heatsink and fan connector nearby. I tried using a re-flow heat gun and that was doing nothing. I removed as much solder as I could with flux on a soldering iron and just slowly nudged the component bit by bit on each side using the iron until it came free.
post edited by altanore - 2014/05/12 21:20:50
|
flyin15sec
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2007/03/30 12:50:57
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/12 18:50:52
(permalink)
Just got mine done today. Seems to be working fine. While I didn't do the actual work, my wife did, she moved the resistor from R538 to R539. FYI - If you happen to lose the resistor, it's a 0 ohm resistor.
Attached Image(s)
EVGA X58 E758 Xeon X5650 OEM ECC memory @ 1333mhz Thermalright TRUE Spirit 140 Power EVGA GTX570 CM Stacker 830 EVO CM 1000W
|
dakiel
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2010/07/25 04:31:03
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/12 20:00:24
(permalink)
Sounds awesome. I'll be attempting this weekend. Thank you all for your help!
|
jboudwin
SSC Member
- Total Posts : 504
- Reward points : 0
- Joined: 2010/01/02 11:39:16
- Location: Central Jersey...and yes it IS the Garden State
- Status: offline
- Ribbons : 2
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/17 19:41:39
(permalink)
NordicJedi
Keep in mind that modding the board will void your warranty. If the board is still under warranty, EVGA can take your board and mod it for you, so you don't have to worry about your warranty.
I'm waiting on an RMA of my X58n 4Way Classified and asked for them to mod it for hexcores. I was told by tech support that they do no such mod. Funny because I have seen references to the mod for $60 elsewhere on the forums.
Mobo...EVGA Z390 Dark CPU...I9 9900K . GPU...EVGA GTX 2080 Ti . RAM...Corsair Vengeance RGB PRO 32 GB 3200MHz SSD...Samsung V-NAND SSD 970 EVO NVMe M.2 2x2TB PSU...Silverstone Strider 1500W Case...CoolerMaster HAF CPU waterblock... EVGA 240mm CLC OS...Windows 10 Professional 64bit Headphones...Beyerdynamic DT770 Pro Monitor...BenQ 27" 120Hz X2 http://www.heatware.com/eval.php?id=72035Affiliate code...3NHCVGU6U9
|
Gomez99
CLASSIFIED Member
- Total Posts : 2637
- Reward points : 0
- Joined: 2013/03/28 16:53:08
- Location: L.A.
- Status: offline
- Ribbons : 14
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/17 23:33:08
(permalink)
jboudwin
NordicJedi
Keep in mind that modding the board will void your warranty. If the board is still under warranty, EVGA can take your board and mod it for you, so you don't have to worry about your warranty.
I'm waiting on an RMA of my X58n 4Way Classified and asked for them to mod it for hexcores. I was told by tech support that they do no such mod. Funny because I have seen references to the mod for $60 elsewhere on the forums.
Ask them to mod for Dual QPI
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/18 00:39:39
(permalink)
flyin15sec
Just got mine done today. Seems to be working fine.
While I didn't do the actual work, my wife did, she moved the resistor from R538 to R539.
FYI - If you happen to lose the resistor, it's a 0 ohm resistor.
A 'zero ohm' resistor would be a jumper.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
ryujisakata28
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2014/05/10 16:45:53
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/19 16:37:03
(permalink)
Hi, for the rev 1.1 of this motherboard is necessary maje the mod for working xeon x5650? Or maybe with the bios 83 its suported
Thanks a lot
|
dakiel
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2010/07/25 04:31:03
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/19 16:54:17
(permalink)
Mod is necessary for 1.1. My attempt got delayed as the person who will be doing it is on vacation. I should have results in a couple weeks.
|
ryujisakata28
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2014/05/10 16:45:53
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/19 17:16:17
(permalink)
dakiel
Mod is necessary for 1.1. My attempt got delayed as the person who will be doing it is on vacation. I should have results in a couple weeks.
Thanks a lot. It,s dificult make it?
|
Gomez99
CLASSIFIED Member
- Total Posts : 2637
- Reward points : 0
- Joined: 2013/03/28 16:53:08
- Location: L.A.
- Status: offline
- Ribbons : 14
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/19 17:18:02
(permalink)
Mod is not to terribly difficult and is required unless you have a rev 1.2 or later
|
dakiel
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2010/07/25 04:31:03
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/05/19 20:19:56
(permalink)
Yeah, just make sure you have a fine tip soldering iron and the one that sucks away excess solder.
|
foureight84
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2010/02/21 17:41:59
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/03 21:26:42
(permalink)
has anyone on the e758 overclocked the x5660? i'm curious as to how much you can overclock this little beast.
|
fanboy
CLASSIFIED Member
- Total Posts : 2811
- Reward points : 0
- Joined: 2007/05/20 16:40:00
- Status: offline
- Ribbons : 9
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/11 22:28:44
(permalink)
Did they make a REV 1.3 board? cpu-z reports rev 13 for mine.
Xeon X5660 6core Evga E758 X58 3 way Sli A1 rev 1.2 OCZ Gold DRR3 1600Mhz 6Gb WD Black 500Gb 32Mb CX Sapphire R9-280 Corsair TX Series CMPSU-950TX 950W Eyefinity 5760 x 1080
|
_JamesR
EVGA Alumni
- Total Posts : 253
- Reward points : 0
- Joined: 2014/06/01 07:01:44
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 00:04:25
(permalink)
jboudwin
I'm waiting on an RMA of my X58n 4Way Classified and asked for them to mod it for hexcores. I was told by tech support that they do no such mod. Funny because I have seen references to the mod for $60 elsewhere on the forums.
As far as I've been told, we do perform the mod. If you would rather have us do it, call up or send an email to EVGA tech support, tell us which board you have, and ask for the Westmere mod. We should be able to help you through the process.
EVGA Z97 Classified w/ i7 4790 | 32GB Crucial Ballistix Elite | 2x EVGA GTX 980 Ti ACX 2.0 | EVGA 1000w G2 | Samsung EVO 840 120GB | Samsung 850 EVO 250GB | Seagate 3TB | 3x WD 2TB (Raid-5) | Corsair H100i GTX | 3x Asus VS278P-Q 27" 1080p 1ms GTG monitor (surround) | 1 Monoprice 28" 4K 5ms GTG (accessory)
|
ryujisakata28
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2014/05/10 16:45:53
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 00:27:12
(permalink)
Hi. Maybe it s possible. Please look at the corner of your mother, near the pci ports. It's printed the rev of mother on it. Mine is 1.1, but when i do the mod, cpuz says rev12.
|
ryujisakata28
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2014/05/10 16:45:53
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 00:34:43
(permalink)
Xeon westmere is suported Out the box until rev 1.2.
|
fanboy
CLASSIFIED Member
- Total Posts : 2811
- Reward points : 0
- Joined: 2007/05/20 16:40:00
- Status: offline
- Ribbons : 9
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 09:35:27
(permalink)
I just looked and my board is REV 1.2 but i'm thinking my bios may be to old as it worked great out of the box and never updated it.. cpu-z reports bios date 10-30-09 and 6.00PG .. would I need ELEET to really see what bios i'm running?
Xeon X5660 6core Evga E758 X58 3 way Sli A1 rev 1.2 OCZ Gold DRR3 1600Mhz 6Gb WD Black 500Gb 32Mb CX Sapphire R9-280 Corsair TX Series CMPSU-950TX 950W Eyefinity 5760 x 1080
|
ryujisakata28
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2014/05/10 16:45:53
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 10:07:01
(permalink)
I don t know. I put latest bios ver 83, that fits microcode for some cpu.
|
fanboy
CLASSIFIED Member
- Total Posts : 2811
- Reward points : 0
- Joined: 2007/05/20 16:40:00
- Status: offline
- Ribbons : 9
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 10:38:29
(permalink)
I don't even see a link for bios for these boards anymore .
Xeon X5660 6core Evga E758 X58 3 way Sli A1 rev 1.2 OCZ Gold DRR3 1600Mhz 6Gb WD Black 500Gb 32Mb CX Sapphire R9-280 Corsair TX Series CMPSU-950TX 950W Eyefinity 5760 x 1080
|
ryujisakata28
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2014/05/10 16:45:53
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 10:41:36
(permalink)
http://www.evga.com/support/download/default.aspx
|
fanboy
CLASSIFIED Member
- Total Posts : 2811
- Reward points : 0
- Joined: 2007/05/20 16:40:00
- Status: offline
- Ribbons : 9
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 10:52:29
(permalink)
Thank's.. it already has Xeon support under current bios but not for 32nm which as u say ver 83 is the magic ticket..
Xeon X5660 6core Evga E758 X58 3 way Sli A1 rev 1.2 OCZ Gold DRR3 1600Mhz 6Gb WD Black 500Gb 32Mb CX Sapphire R9-280 Corsair TX Series CMPSU-950TX 950W Eyefinity 5760 x 1080
|
ryujisakata28
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2014/05/10 16:45:53
- Status: offline
- Ribbons : 0
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 10:58:21
(permalink)
Yes. Last version of bios is the key ;-)
There is some one with a bios layout to make this xeon overclock like a beast? I ll try a layout for i7 920 in my x58 3sli and didn t work properly for the xeon. Bsod screen appears or has an erron on boot.
Any help?
|
fanboy
CLASSIFIED Member
- Total Posts : 2811
- Reward points : 0
- Joined: 2007/05/20 16:40:00
- Status: offline
- Ribbons : 9
Re: 132-BL-E758-A1 Rev 1.0 Westmere Mod
2014/07/12 15:58:27
(permalink)
There is group over at HardOPC that is working together on Xeon's but all of them have Asus boards I think.. they may could help you.
Xeon X5660 6core Evga E758 X58 3 way Sli A1 rev 1.2 OCZ Gold DRR3 1600Mhz 6Gb WD Black 500Gb 32Mb CX Sapphire R9-280 Corsair TX Series CMPSU-950TX 950W Eyefinity 5760 x 1080
|