Stay Puft
iCX Member
- Total Posts : 286
- Reward points : 0
- Joined: 2013/04/22 13:25:17
- Status: offline
- Ribbons : 1
|
EVGA_James
EVGA Product Manager
- Total Posts : 1026
- Reward points : 0
- Joined: 2012/12/14 14:54:29
- Status: offline
- Ribbons : 3
Re: Memory for SR-2
2014/04/21 07:43:02
(permalink)
Hello, You can find a full list of tested and supported memory for the SR2. As you can see that the memory kit in question is not on the list so unfortunately we can not guarantee that they will work with no issues, especially at its manufacturers rated frequencies. There may be some forum members that have tried this kit and may be able to confirm if they work or not.
|
Stay Puft
iCX Member
- Total Posts : 286
- Reward points : 0
- Joined: 2013/04/22 13:25:17
- Status: offline
- Ribbons : 1
Re: Memory for SR-2
2014/04/21 08:32:32
(permalink)
[quote ATech_JamesL] Hello, You can find a full list of tested and supported memory for the SR2. As you can see that the memory kit in question is not on the list so unfortunately we can not guarantee that they will work with no issues, especially at its manufacturers rated frequencies. There may be some forum members that have tried this kit and may be able to confirm if they work or not.
Thanks James. I wasn't expecting it to run at all over ddr3 2000 speeds but Just didn't want to waste money on older Dominator ram
|
gordan79
SSC Member
- Total Posts : 531
- Reward points : 0
- Joined: 2013/01/27 00:17:36
- Status: offline
- Ribbons : 3
Re: Memory for SR-2
2014/04/22 01:35:41
(permalink)
To achieve 2GHz on RAM you will need to run bclk at 200, which you are unlikely to achieve stably. You will find major clock and timer instabilities beyond 180 bclk, and you should really be getting ECC RAM to help detect stability issues. Registered DIMMs also tend to be more stable at higher speeds. IMO there is no point in getting RAM beyond DDR3-1800 for the SR-2, and if you manage to by some miracle get it stable for more than the CPU-Z screenshot and a benchmark result above 180, most decent RAM will OC a little. Personally, I like my margin for error so I run bclk at 166 at full 10x RAM multiplier with ECC RDIMMs (12x8GB).
Supermicro X8DTH-6, 2x X5690 Crucial 12x 8GB x4 DR 1.35V DDR3-1600 ECC RDIMMs (96GB) 3x GTX 1080Ti Triple-Seat Virtualized With VGA Passthrough (KVM)
|
Stay Puft
iCX Member
- Total Posts : 286
- Reward points : 0
- Joined: 2013/04/22 13:25:17
- Status: offline
- Ribbons : 1
Re: Memory for SR-2
2014/04/22 01:43:51
(permalink)
gordan79 To achieve 2GHz on RAM you will need to run bclk at 200, which you are unlikely to achieve stably. You will find major clock and timer instabilities beyond 180 bclk, and you should really be getting ECC RAM to help detect stability issues. Registered DIMMs also tend to be more stable at higher speeds. IMO there is no point in getting RAM beyond DDR3-1800 for the SR-2, and if you manage to by some miracle get it stable for more than the CPU-Z screenshot and a benchmark result above 180, most decent RAM will OC a little. Personally, I like my margin for error so I run bclk at 166 at full 10x RAM multiplier with ECC RDIMMs (12x8GB).
Appreciate the reply Gordon. I dont plan on running the memory at even DDR3 2000 speeds. I'm just considering the faster memory because its cheaper than the 1600 memory. :) Ripjaws X 8GB DDR3 1333 - 69.99 8GB DDR3 1600 - 74.99 8GB DDR3 1866 - 69.99 8GB DDR3 2133 - 72.99 8GB DDR3 2400 - 72.99 I just wanted to make sure this memory wont have any issues running on the board
post edited by Stay Puft - 2014/04/22 01:50:05
|
Gomez99
CLASSIFIED Member
- Total Posts : 2637
- Reward points : 0
- Joined: 2013/03/28 16:53:08
- Location: L.A.
- Status: offline
- Ribbons : 14
Re: Memory for SR-2
2014/04/22 18:34:33
(permalink)
I doubt it will as I have used non verified mem on other EVGA boards before, just make sure it isn't less than 1.45v
|
gordan79
SSC Member
- Total Posts : 531
- Reward points : 0
- Joined: 2013/01/27 00:17:36
- Status: offline
- Ribbons : 3
Re: Memory for SR-2
2014/04/23 01:43:26
(permalink)
Why? I run my 96GB of 1.35V DIMMs @ 1.35V without any problems.
Supermicro X8DTH-6, 2x X5690 Crucial 12x 8GB x4 DR 1.35V DDR3-1600 ECC RDIMMs (96GB) 3x GTX 1080Ti Triple-Seat Virtualized With VGA Passthrough (KVM)
|
Stay Puft
iCX Member
- Total Posts : 286
- Reward points : 0
- Joined: 2013/04/22 13:25:17
- Status: offline
- Ribbons : 1
Re: Memory for SR-2
2014/04/23 06:46:45
(permalink)
Gomez99 I doubt it will as I have used non verified mem on other EVGA boards before, just make sure it isn't less than 1.45v
Appreciate the reply Gomez. Picked up 24GB of 2133 for 209.99 with coupon. Will be nice if i can get some great timings at 1600 with it.
|
Gomez99
CLASSIFIED Member
- Total Posts : 2637
- Reward points : 0
- Joined: 2013/03/28 16:53:08
- Location: L.A.
- Status: offline
- Ribbons : 14
Re: Memory for SR-2
2014/04/23 06:59:04
(permalink)
gordan79 Why? I run my 96GB of 1.35V DIMMs @ 1.35V without any problems.
Mostly a safe guard, some memory controllers don't like going beneath a certain voltage, in your case you were fine but it can vary
|
Stay Puft
iCX Member
- Total Posts : 286
- Reward points : 0
- Joined: 2013/04/22 13:25:17
- Status: offline
- Ribbons : 1
Re: Memory for SR-2
2014/04/25 05:04:36
(permalink)
Gomez99
gordan79 Why? I run my 96GB of 1.35V DIMMs @ 1.35V without any problems.
Mostly a safe guard, some memory controllers don't like going beneath a certain voltage, in your case you were fine but it can vary
Depends on the memory controller. The lower the voltage the better
|
Gomez99
CLASSIFIED Member
- Total Posts : 2637
- Reward points : 0
- Joined: 2013/03/28 16:53:08
- Location: L.A.
- Status: offline
- Ribbons : 14
Re: Memory for SR-2
2014/04/25 21:42:43
(permalink)
Stay Puft
Gomez99
gordan79 Why? I run my 96GB of 1.35V DIMMs @ 1.35V without any problems.
Mostly a safe guard, some memory controllers don't like going beneath a certain voltage, in your case you were fine but it can vary
Depends on the memory controller. The lower the voltage the better
Depends too, some memory controllers can't function with DDR3L DIMMs
|
gordan79
SSC Member
- Total Posts : 531
- Reward points : 0
- Joined: 2013/01/27 00:17:36
- Status: offline
- Ribbons : 3
Re: Memory for SR-2
2014/04/25 23:54:40
(permalink)
This is an SR-2 forum. MCs on Xeons compatible with the SR-2 work just fine with 1.35V DIMMs even when using 12x8GB DIMMs. Other MCs are completely irrelevant in this thread. Not to mention that practically all 1.35V DIMMs work just fine at 1.5V if you really need them to.
Supermicro X8DTH-6, 2x X5690 Crucial 12x 8GB x4 DR 1.35V DDR3-1600 ECC RDIMMs (96GB) 3x GTX 1080Ti Triple-Seat Virtualized With VGA Passthrough (KVM)
|