EVGA

Eleet Utility not showing all information

Author
Post
Essentials Only Full Version
corndogg18
iCX Member
  • Total Posts : 288
  • Reward points : 0
  • Joined: 2008/05/22 11:19:55
  • Location: Minnesota
  • Status: offline
  • Ribbons : 2
2014/12/28 10:23:54 (permalink)
Ok, So I am trying to use the Eleet utility. However its not showing the multi information, and several other details. CPUz seems to show all this just fine. Eleet is also not showing the overclock? Maybe I don't have something set right in the BIOS? I have C states disabled, mutli on manual, and EIST enabled.

Specs:
EVGA X99 Classified Mobo
Intel I7 5960x @ 4.3Ghz
Corsair H100i CPU Cooler
8x4GB (32GB) G.Skill Ripjaws 4  @
2400Mhz 15-15-15-35 @ 1.20V
2x EVGA 580 Classifieds 3GB SLI  @ 900Mhz
Intel 750 series 1.2TB AIC SSD (Main Drive)
Intel 730 Series 480GB SSD (Storage Drive)  
Corsair AX1200 PSU
Corsair Obsidian Series 650D Case 
Corsair K70 RGB Keyboard
EVGA TORQ X10 Mouse
#1

6 Replies Related Threads
    GTXJackBauer
    Omnipotent Enthusiast
    • Total Posts : 10323
    • Reward points : 0
    • Joined: 2010/04/19 22:23:25
    • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
    • Status: offline
    • Ribbons : 48
    Re: Eleet Utility not showing all information 2014/12/28 10:27:56 (permalink)
    I think I might have heard that the E-Leet isn't up to par for the X99 as of yet.  Not sure how old the software is but I swear I heard it hasn't been updated for the X99 line.

     Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
    LMD3DNZM9LGK8GJ
    #2
    the_Scarlet_one
    formerly Scarlet-tech
    • Total Posts : 24581
    • Reward points : 0
    • Joined: 2013/11/13 02:48:57
    • Location: East Coast
    • Status: offline
    • Ribbons : 79
    Re: Eleet Utility not showing all information 2014/12/28 10:28:44 (permalink)
    It is still in beta. Last time I checked, it didn't even do anything other than display the stuff you can't change anyway. Cpu-z doesn't change anything, so what would you need from eleet at this point?

    It's meant for overclocking, so that is why I ask. When I last tried it, it was less than useful. If you are only looking for what cpuz displays, then use cpuz until eleet comes out of beta.


    TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
    #3
    corndogg18
    iCX Member
    • Total Posts : 288
    • Reward points : 0
    • Joined: 2008/05/22 11:19:55
    • Location: Minnesota
    • Status: offline
    • Ribbons : 2
    Re: Eleet Utility not showing all information 2014/12/28 10:38:01 (permalink)
    I just ask because I see others with screenshots of using the Eleet utility, using X99 and the 5930k, and it seems to show valid information. Mine does not. But you are correct, there is no reason other then, me using it to change voltage settings for my 580's as the precision X does not allow me to adjust voltage. CPUz works just fine for information, so I will use that, and the Eleet utility to adjust voltage for my graphics cards. Would be nice to just use the one utility for both, but I will just have to wait until the Eleet utility is available and working for the X99 platform.

    Specs:
    EVGA X99 Classified Mobo
    Intel I7 5960x @ 4.3Ghz
    Corsair H100i CPU Cooler
    8x4GB (32GB) G.Skill Ripjaws 4  @
    2400Mhz 15-15-15-35 @ 1.20V
    2x EVGA 580 Classifieds 3GB SLI  @ 900Mhz
    Intel 750 series 1.2TB AIC SSD (Main Drive)
    Intel 730 Series 480GB SSD (Storage Drive)  
    Corsair AX1200 PSU
    Corsair Obsidian Series 650D Case 
    Corsair K70 RGB Keyboard
    EVGA TORQ X10 Mouse
    #4
    the_Scarlet_one
    formerly Scarlet-tech
    • Total Posts : 24581
    • Reward points : 0
    • Joined: 2013/11/13 02:48:57
    • Location: East Coast
    • Status: offline
    • Ribbons : 79
    Re: Eleet Utility not showing all information 2014/12/28 10:41:03 (permalink)
    Well, hopefully they are working on it and not releasing it until it is ready. I am not even sure they remember it is around, lol.


    TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
    #5
    corndogg18
    iCX Member
    • Total Posts : 288
    • Reward points : 0
    • Joined: 2008/05/22 11:19:55
    • Location: Minnesota
    • Status: offline
    • Ribbons : 2
    Re: Eleet Utility not showing all information 2014/12/28 14:02:57 (permalink)
    Lol, not a big deal I guess, just thought I'd ask and see if anyone knew the story.

    Specs:
    EVGA X99 Classified Mobo
    Intel I7 5960x @ 4.3Ghz
    Corsair H100i CPU Cooler
    8x4GB (32GB) G.Skill Ripjaws 4  @
    2400Mhz 15-15-15-35 @ 1.20V
    2x EVGA 580 Classifieds 3GB SLI  @ 900Mhz
    Intel 750 series 1.2TB AIC SSD (Main Drive)
    Intel 730 Series 480GB SSD (Storage Drive)  
    Corsair AX1200 PSU
    Corsair Obsidian Series 650D Case 
    Corsair K70 RGB Keyboard
    EVGA TORQ X10 Mouse
    #6
    Boxlid
    Superclocked Member
    • Total Posts : 223
    • Reward points : 0
    • Joined: 2009/12/12 00:05:14
    • Status: offline
    • Ribbons : 3
    Re: Eleet Utility not showing all information 2014/12/28 15:51:26 (permalink)
    They could've at least had it display voltages and temperatures by this point, that would at least be a little help...


    #7
    Jump to:
  • Back to Mobile