bcavnaugh

pittbull

RedSpeed
Here is a photo of what is going on 

Connect to the 8 pin at the top  near I/O panel solved
 
The USB header is for case wiring plug it connects the front USB ports on case both 2.0 and 3.0
  

Sgt Hoit
Are you sure, the specs state that there are 2 - USB 2.0 ports on each of the Z170 motherboards.  I just ordered a Classified Z170 board for a new build and need at least 2 - USB 2.0 ports.  I'm going to be pretty pissed off they're not on the board.

BACK I/O Panel man 2 x 2.0 usb port I have 4 the front of THOR V2 has dual 2.0 and 3.0 ports too.
 
Blue Case cable for front USB 2.0/30
 
 http://www.modsrigs.com/detail.aspx?buildid=35441
 
FTW is solid board my last system went almost a decade a little use of the 680i then swapped to the 780i FTW
 

Remember that you cannot connect a USB 2.0 into a USB 3.x Header Connector on the Motherboard.
You can connect a USB Device with a USB Cable to a USB PORTS that are on the I/O Panel or the USB 3.x PORTS on the Case.
DO NOT PLUG A USB 2.0 Header Connector into a USB 3.0 or 3.0 Header Connector.
Is what is Missing on the FTW Motherboard is a USB 2.0 Header Connector NOT the lack of USB 2.0 Ports.