Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/14 11:50:10
(permalink)
nateman_doo
My personal favorite has always been artic silver ceramique. Its non-conductive & non-capacitive properties are handy if you get it on other components. Time to head downstairs and see what the nights labor brought.
Thats what I run.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/14 13:19:36
(permalink)
Chipsets: 
|
Boxlid
Superclocked Member
- Total Posts : 206
- Reward points : 0
- Joined: 2009/12/12 00:05:14
- Status: offline
- Ribbons : 3
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/14 13:24:54
(permalink)
|
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/14 13:26:00
(permalink)
Arctic Silver Ceramique 2 2.7g Premium High Density Thermal Cooling Compound Retail (CMQ2-2.7G) Or Arctic Silver Ceramique 2.5g Premium High-Density Thermal Cooling Compound (CMQ-2.5G) I am about to change mine out on all my Water Blocks. I use ARCTIC MX-4 now but from what is being said in this Thread Arctic Silver Ceramique is better.
post edited by bcavnaugh - 2014/12/14 13:41:04
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/14 18:21:31
(permalink)
I just installed a chipset plate and its good to go. 2 washer spacers, and copper right to the chipset. Not likely going to have any updates until mid week, if not the end of the week. Going to be guncoating copper, and cutting delrin.
|
AnonymousGuy
ACX Member
- Total Posts : 360
- Reward points : 0
- Joined: 2014/09/17 21:15:46
- Status: offline
- Ribbons : 2
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/14 22:20:41
(permalink)
nateman_doo
I just installed a chipset plate and its good to go. 2 washer spacers, and copper right to the chipset. Not likely going to have any updates until mid week, if not the end of the week. Going to be guncoating copper, and cutting delrin.
You mean you're going to be applying paint to the blocks? If I have a choice, I'd like mine to be bare copper so I can have it gold plated locally if I can find a shop within reasonable distance to do it.
Workstation: E5-1650v3 || ASRock X99 WS-E || EVGA Titan X SLI || Crucial DDR4-2133 ECC 4x8GB || Corsair AX1500i" || World's Craziest Watercooling Setup (rev. 9)Server Storage: Pent. G3220 || Z87 Gryphon mATX || || LSI MegaRAID 9280i-24 || 24 x HGST / WD Red Pro 3TB in raid 60 (~55TB) || EVGA 740 GT SC || Corsair RM650xServer Compute: 5960X || EVGA X99 micro2 || Zotac GTX 780 || Corsair AX1200i || All watercooled + 480 rad push pull.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/15 16:43:12
(permalink)
AnonymousGuy
nateman_doo
I just installed a chipset plate and its good to go. 2 washer spacers, and copper right to the chipset. Not likely going to have any updates until mid week, if not the end of the week. Going to be guncoating copper, and cutting delrin.
You mean you're going to be applying paint to the blocks? If I have a choice, I'd like mine to be bare copper so I can have it gold plated locally if I can find a shop within reasonable distance to do it.
you got it.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/16 04:33:28
(permalink)
Do you want it bead blasted, or just left as is?
Did you find a plater yet?
|
AnonymousGuy
ACX Member
- Total Posts : 360
- Reward points : 0
- Joined: 2014/09/17 21:15:46
- Status: offline
- Ribbons : 2
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/16 07:31:20
(permalink)
nateman_doo
Do you want it bead blasted, or just left as is?
Did you find a plater yet?
Left as is works for me. My setup doesn't care much about aesthetics :) Haven't found a plater yet but being in a large city I don't think it will be too hard to find one. I suppose I can always mail order it if I need to as well.
Workstation: E5-1650v3 || ASRock X99 WS-E || EVGA Titan X SLI || Crucial DDR4-2133 ECC 4x8GB || Corsair AX1500i" || World's Craziest Watercooling Setup (rev. 9)Server Storage: Pent. G3220 || Z87 Gryphon mATX || || LSI MegaRAID 9280i-24 || 24 x HGST / WD Red Pro 3TB in raid 60 (~55TB) || EVGA 740 GT SC || Corsair RM650xServer Compute: 5960X || EVGA X99 micro2 || Zotac GTX 780 || Corsair AX1200i || All watercooled + 480 rad push pull.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/16 09:14:23
(permalink)
I can bead blast it aand clear coat it also. If you don't care much about aesthetics, why not get the gun coat? I lap the bottoms so there is no paint on the bottom
|
AnonymousGuy
ACX Member
- Total Posts : 360
- Reward points : 0
- Joined: 2014/09/17 21:15:46
- Status: offline
- Ribbons : 2
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/16 09:16:56
(permalink)
I'm thinking whatever makes it easiest / cheapest for the plater to deal with. If it's got paint on it it might make it so they can't dunk the whole thing in the plating baths.
Workstation: E5-1650v3 || ASRock X99 WS-E || EVGA Titan X SLI || Crucial DDR4-2133 ECC 4x8GB || Corsair AX1500i" || World's Craziest Watercooling Setup (rev. 9)Server Storage: Pent. G3220 || Z87 Gryphon mATX || || LSI MegaRAID 9280i-24 || 24 x HGST / WD Red Pro 3TB in raid 60 (~55TB) || EVGA 740 GT SC || Corsair RM650xServer Compute: 5960X || EVGA X99 micro2 || Zotac GTX 780 || Corsair AX1200i || All watercooled + 480 rad push pull.
|
Evgen_AMD
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2009/04/05 19:44:45
- Location: RUSSIA
- Status: offline
- Ribbons : 0
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/16 18:34:38
(permalink)
You mean my request not forgotten?
I would like to buy a water block for the mosfet.
i7-5960X(4,55) \/EVGA Х99 Classified \/Corsair Vengeance LPX CMK16GX4M4A2800C16(3120) \/SAMSUNG XP941 MZHPU256HCGL-00004 M.2 256GB \/EVGA GeForce GTX 780 Ti Classified ACX Cooler 3GB GDDR5 (03G-P4-2888-KR) \/PNY GTX580(PhysX) \/Mountain Mods Pinnacle 24 - CYO \/Enermax Galaxy EGX1000EWL
|
sam nelson
Superclocked Member
- Total Posts : 244
- Reward points : 0
- Joined: 2014/01/06 21:07:07
- Status: offline
- Ribbons : 6
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/16 19:18:10
(permalink)
nate does it help and make it look better or last longer to blast it and clear it ? if it makes it better sure fine with me. i'm planeing to make the a badass cp and look good to .
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/16 20:36:02
(permalink)
AnonymousGuy
I'm thinking whatever makes it easiest / cheapest for the plater to deal with. If it's got paint on it it might make it so they can't dunk the whole thing in the plating baths.
Couldn't tell you whats easier, since I don't do plating. If its not a show build, the gun-coating is the most durable thing I have. Evgen_AMD
You mean my request not forgotten?
I would like to buy a water block for the mosfet.
it wasn't forgotten, just been working on the blocks.
|
AnonymousGuy
ACX Member
- Total Posts : 360
- Reward points : 0
- Joined: 2014/09/17 21:15:46
- Status: offline
- Ribbons : 2
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/16 20:51:28
(permalink)
nateman_doo
AnonymousGuy
I'm thinking whatever makes it easiest / cheapest for the plater to deal with. If it's got paint on it it might make it so they can't dunk the whole thing in the plating baths.
Couldn't tell you whats easier, since I don't do plating. If its not a show build, the gun-coating is the most durable thing I have.
If it doesn't matter to you, I'd just do what you normally would do except no coatings at all applied. I know it might end up looking like ass in a few months when the bare copper oxidizes, but hopefully it'll have a shiny layer of hard gold plate before then :)
Workstation: E5-1650v3 || ASRock X99 WS-E || EVGA Titan X SLI || Crucial DDR4-2133 ECC 4x8GB || Corsair AX1500i" || World's Craziest Watercooling Setup (rev. 9)Server Storage: Pent. G3220 || Z87 Gryphon mATX || || LSI MegaRAID 9280i-24 || 24 x HGST / WD Red Pro 3TB in raid 60 (~55TB) || EVGA 740 GT SC || Corsair RM650xServer Compute: 5960X || EVGA X99 micro2 || Zotac GTX 780 || Corsair AX1200i || All watercooled + 480 rad push pull.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/16 21:12:32
(permalink)
Shoot me an e-mail and we can talk off-line about it. headed to bed now. All the other Vregs have been guncoated and are curing now. Pics at the end of the week I hope. Chipsets up next.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 07:59:29
(permalink)
So I lied, here is a picture for you guys.  Freshly cured, pre-lapping blocks.
|
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 09:17:02
(permalink)
It''s like computer p0rn..lol Thanks for the updates!
5960X @ 3.9 GHz || EVGA X99 Classified || GTX 980 SC 3xSLI @1.5 GHz || G.Skill 8x8gb DDR4-2400 || EVGA 1600 P2 || Enthoo Primo White|| 2 x Samsung 850 512GB RAID 0 || 3 x 4TB NAS drives RAID 5|| Custom watercooling -NatemanDoo blocks 
|
Erica647
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2012/04/28 19:54:06
- Status: offline
- Ribbons : 0
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 14:08:27
(permalink)
That looks so good... wish I was comfortable building my own water-cooling setup.
|
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 16:44:46
(permalink)
It's easy of you just go step by step! Any project can be overwhelming at first.
5960X @ 3.9 GHz || EVGA X99 Classified || GTX 980 SC 3xSLI @1.5 GHz || G.Skill 8x8gb DDR4-2400 || EVGA 1600 P2 || Enthoo Primo White|| 2 x Samsung 850 512GB RAID 0 || 3 x 4TB NAS drives RAID 5|| Custom watercooling -NatemanDoo blocks
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 17:02:12
(permalink)
Erica647
That looks so good... wish I was comfortable building my own water-cooling setup.
Trust me when i say, there is no better place to start then this forum. There are people here that can coach you through anything from changing a tire, reloading your own bullets, reprogramming the matrix, or building a watercooling system. Oh yea, and welcome to the forums! If your interested in one of these, let me know.
|
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 17:06:21
(permalink)
|
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 19:15:20
(permalink)
nateman_doo
Erica647
That looks so good... wish I was comfortable building my own water-cooling setup.
Trust me when i say, there is no better place to start then this forum. There are people here that can coach you through anything from changing a tire, reloading your own bullets, reprogramming the matrix, or building a watercooling system.
Oh yea, and welcome to the forums! If your interested in one of these, let me know.
I need to reprogram the matrix... Maybe I should start a new thread for this. ;-D
If you would like to use an affiliate code to register a product, feel free use this one: >Click Here< This is not my affiliate code! This is a random users code. This code will change often, and you will never be told who it belongs to! If you would like the possibility of your code being listed above, it must be in your signature block. I will not take requests to use a specific code.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
|
Boxlid
Superclocked Member
- Total Posts : 206
- Reward points : 0
- Joined: 2009/12/12 00:05:14
- Status: offline
- Ribbons : 3
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 19:31:13
(permalink)
Looking good, like the lady in the red dress 
|
kmarch
New Member
- Total Posts : 70
- Reward points : 0
- Joined: 2009/02/18 19:02:30
- Status: online
- Ribbons : 0
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 20:19:05
(permalink)
Looking good, it looks better then the stock non water cooling block no giant red E.
|
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 20:29:35
(permalink)
Nate, I must ask about the heat pipe that runs from the chipset to the VRM. Does it make contact under the chipset side, or have any reason for the two to be connected? I was just curious what it looked like underneath the heat sinks.
If you would like to use an affiliate code to register a product, feel free use this one: >Click Here< This is not my affiliate code! This is a random users code. This code will change often, and you will never be told who it belongs to! If you would like the possibility of your code being listed above, it must be in your signature block. I will not take requests to use a specific code.
|
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/17 20:42:39
(permalink)
can you help me reload my.... bfg50 lol
post edited by kbeaumont5 - 2014/12/17 20:44:45
5960X @ 3.9 GHz || EVGA X99 Classified || GTX 980 SC 3xSLI @1.5 GHz || G.Skill 8x8gb DDR4-2400 || EVGA 1600 P2 || Enthoo Primo White|| 2 x Samsung 850 512GB RAID 0 || 3 x 4TB NAS drives RAID 5|| Custom watercooling -NatemanDoo blocks
|
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/18 03:39:45
(permalink)
My board!!!
Kbeaumont5 i can help you load .50
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: online
- Ribbons : 52
Re: EVGA X99 Classified Waterblock *sketches up*
2014/12/18 11:58:31
(permalink)
Scarlet-Tech
Nate, I must ask about the heat pipe that runs from the chipset to the VRM. Does it make contact under the chipset side, or have any reason for the two to be connected? I was just curious what it looked like underneath the heat sinks.
Id have to dig them out. I hope to be cutting some delrin by the end of today.
|
