ryulonius
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2013/09/15 21:37:58
- Status: offline
- Ribbons : 0
Re:New guy here, hoping to get some solutions.
2013/09/15 23:55:37
(permalink)
thanks again.
I guess i should've asked how i can trouble shoot to see if it's my pc that's causing lag?
CPU: I7-920 OCed @ default 2.66GHz OC'ed to 20x205 (turbo on= 21x205=4.305GHz in bios) but CPU-Z shows 4.29ish Ghz, Temp: 35-44C @ idle, 74-82 C 100% load and 90% RAM, stable over night Prime95. Cooler: Noctua nh d14 since 11/16/2015 MOBO: EVGA 58x 3 SLI 131-GT-E767 GPU: EVGA GTX 970 RAM: GSkill DDR3-1600 PC3-12800, 9-9-9-24 (2GB x3)x2=12gb
|
firerx
CLASSIFIED Member
- Total Posts : 3051
- Reward points : 0
- Joined: 2007/01/28 12:52:50
- Location: Phoenix, Arizona
- Status: offline
- Ribbons : 4
Re:EVGA X58 Motherboards - BIOS 83 Released
2013/10/12 06:13:07
(permalink)
Any of you having issue with temp control under bios 83. it's not reporting the proper temps on CPU or board.
Asus Rampage V Extreme Edition 10
Intel Core i7 6900K Corsair Platinums 3000mhz 16gb EVGA GTX 1080 FE TT 1200w PSU Samsung 950 Pro M2 SSD 512gb Samsung 850 EVO SSD Samsumg 840 Pro SSD, Seagate 1TB drive LG 34" Monitor 3440 X 1440
|
Re:EVGA X58 Motherboards - BIOS 83 Released
2013/10/12 15:58:41
(permalink)
firerx
Any of you having issue with temp control under bios 83. it's not reporting the proper temps on CPU or board.
seems fine on mine, ofcourse i really would not know if it was reporting badly. what is the exact problem? are the temps all over the place or something?
|
GEORGIAN
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2009/10/18 07:42:03
- Status: offline
- Ribbons : 0
Re:New guy here, hoping to get some solutions.
2014/11/09 19:47:30
(permalink)
So since 2011 no new BIOS is released? Wow, that suks...
What do you think guys how long will x58 Classified E760 will last for gamers?
EVGA CLASSIFIED 141-BL-E760-A1 Intel Xeon w5680 with CM v8 HSF 14GB RAM(OCZ XMP 6GB+Crucial 8GB DDR3 1600 ) 256GB Samsung PRO SSD + 2TB SMS F4 + 1TB WD BL + 2x3TB Toshiba HDD's CORSAIR CMPSU-750HX 750W PSU XFX Radoen 5850 1Gb DDR5 LG W2453V-PF Black 24" 2ms LCD LG WH10LS30K 10X Blu-ray Burner Logitech G9 Windows 8 PRO x64 CM SNIPER
|
KMoore4318
Pistoj Doulos Unum Pluribus
- Total Posts : 17828
- Reward points : 0
- Joined: 2008/12/04 04:20:57
- Location: Atlanta, Ga
- Status: offline
- Ribbons : 233
Re:New guy here, hoping to get some solutions.
2014/11/09 20:37:51
(permalink)
Longer than you will; A X58 6 core with Quad SLI, Raid SSD's, and a Good Cooler pushing 4.2 still matches or beats anything on the market as far as Windows WEI, and running Bench Marks, The Game companies are Just Not into Pushing games farther than the masses are willing to invest into equipment, even the new stuff is a step down in PCI lanes to the CPU, Sure you gain some BIOS stuff, and some sata3 ports, But until they come out with something that Obsoletes the X58, for all I invested in to building it; I will run it until it quits. Actually I will run 4 of them and upgrade when the last one quits! There is still Nothing out there I can go buy, that I would rather have than my X58, OK I know I may have just upset some of you that have to have the latest and greatest, But List what that last 5 grand you sunk in a system got you!
  Just clink Link to Register > My Affiliate Code:VTJPDC4OMB 1)965 V-8 E758(77)580 AX1200 2)980 NH-U12P-SE E761(77)2(980) AX1200 3)980X H-70 E770 (77)2(590) AX1200 4)980X H-70 E762(77)2(580) AX1200 5)920 EVGA Super Cooler E756(82)590 HX1000 6)680I 2(560-ti) HX1000W
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 56351
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Europe
- Status: offline
- Ribbons : 52
Re:New guy here, hoping to get some solutions.
2014/11/09 23:08:02
(permalink)
KMoore4318
Longer than you will; A X58 6 core with Quad SLI, Raid SSD's, and a Good Cooler pushing 4.2 still matches or beats anything on the market as far as Windows WEI, and running Bench Marks, The Game companies are Just Not into Pushing games farther than the masses are willing to invest into equipment, even the new stuff is a step down in PCI lanes to the CPU, Sure you gain some BIOS stuff, and some sata3 ports, But until they come out with something that Obsoletes the X58, for all I invested in to building it; I will run it until it quits. Actually I will run 4 of them and upgrade when the last one quits! There is still Nothing out there I can go buy, that I would rather have than my X58, OK I know I may have just upset some of you that have to have the latest and greatest, But List what that last 5 grand you sunk in a system got you!
+1. The X58 chipset was one of Intel's best releases and is still capable of great gaming.
   (Pazmeister: rjohnson.....YOU ARE A LEGEND, problem solved, i am sendning my missus round to you now so she may have your babies!!) , R.I.P Jeffreyham, R.I.P Corsair_Mike, R.I.P Wrinvert, i7 5820K, Corsair H100, Corsair Vengeance LPX 32GB (CMK32GX4M4A2666C16R), EVGA GTX 1080FTW ACX, Corsair AX1200, EVGA X99 Micro2, Samsung Sm961 m.2, One Corsair SSD, Crossover 4K,
|
GEORGIAN
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2009/10/18 07:42:03
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2014/11/19 15:51:14
(permalink)
Cd can be used RW also right?
EVGA CLASSIFIED 141-BL-E760-A1 Intel Xeon w5680 with CM v8 HSF 14GB RAM(OCZ XMP 6GB+Crucial 8GB DDR3 1600 ) 256GB Samsung PRO SSD + 2TB SMS F4 + 1TB WD BL + 2x3TB Toshiba HDD's CORSAIR CMPSU-750HX 750W PSU XFX Radoen 5850 1Gb DDR5 LG W2453V-PF Black 24" 2ms LCD LG WH10LS30K 10X Blu-ray Burner Logitech G9 Windows 8 PRO x64 CM SNIPER
|
GEORGIAN
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2009/10/18 07:42:03
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2014/11/19 15:51:15
(permalink)
I wanted to use Intel Xeon W3680 , updated to v83 BIOS, will it work on E760 or i need some MOD (YES it's a mod for it) So x58 CPU Support page isn't listed Xeon W3680, does it means it isn't supported?
post edited by GEORGIAN - 2014/11/20 21:23:31
EVGA CLASSIFIED 141-BL-E760-A1 Intel Xeon w5680 with CM v8 HSF 14GB RAM(OCZ XMP 6GB+Crucial 8GB DDR3 1600 ) 256GB Samsung PRO SSD + 2TB SMS F4 + 1TB WD BL + 2x3TB Toshiba HDD's CORSAIR CMPSU-750HX 750W PSU XFX Radoen 5850 1Gb DDR5 LG W2453V-PF Black 24" 2ms LCD LG WH10LS30K 10X Blu-ray Burner Logitech G9 Windows 8 PRO x64 CM SNIPER
|
VIPERIXIX
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2010/10/16 07:09:42
- Location: X
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2014/11/23 18:37:29
(permalink)
Georgian...........the cpu list is much like the memory list. its a guideline and it doesn't always mean it wont work. just means evga may not provide support for it. I did some research on the W3680 in comparison with the other xeon cpu's that are supported by EVGA and Intel and that CPU is supported by the X58 chipset according to intel. I wouldn't go out and buy the cpu to try it as its not in the list and so many others out their that are available that are on the list. but if I had that cpu already in hand I wouldn't hesitate to run it on the X58 chip one bit. but im curiouse why you want to run the xeon on that board in the 1st place. they don't clock well. Theirs always a risk but I would find a cpu on the list if I was gonna buy one. Go to the Intel website and see for yourself before you decide.
i7 4960X X79 Dark (EVGA) G.Skill 64GB 2400mhz Intel 520 SSD (4) Raid 0 1000W PSU (EVGA) W7 Pro 64 bit
|
Night Gyr
Superclocked Member
- Total Posts : 204
- Reward points : 0
- Joined: 2010/09/18 10:32:55
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2014/12/01 03:45:56
(permalink)
Jacob, can you please post the original BIOS for the E767 (SLI3) board? I'm having an issue where the board won't post 2 or 3 times in a row with a Xeon X5650 both with the 82 and the 83 BIOS. I have a ticket open for the issue, but the support has so far recommended downgrading the BIOS. 82 wouldn't resolve the issue, and no older BIOS is available for download on the support page.
|
chinesestunna
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2014/02/18 20:12:55
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/01/05 10:58:03
(permalink)
Anyone with Hex core Xeon X5600 series experience on a E758 board? I'm having an issue where even with this latest bios update the uncore multiplier is stuck at 20X and of course trying to hit 200bclk is impossible as uncore gets up to 4000mhz.
Ironically SR-2/SR-X users had this issue: and basically it seems that the BIOS update fixed it for them in 2010, I would've thought our version 83 bios that came out late 2011 should've had the fix already in. Any thoughts?
|
Coldblackice
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2010/08/08 03:48:29
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/04/25 22:10:10
(permalink)
chinesestunna
Anyone with Hex core Xeon X5600 series experience on a E758 board? I'm having an issue where even with this latest bios update the uncore multiplier is stuck at 20X and of course trying to hit 200bclk is impossible as uncore gets up to 4000mhz.
Ironically SR-2/SR-X users had this issue: and basically it seems that the BIOS update fixed it for them in 2010, I would've thought our version 83 bios that came out late 2011 should've had the fix already in. Any thoughts?
Night Gyr
Jacob, can you please post the original BIOS for the E767 (SLI3) board? I'm having an issue where the board won't post 2 or 3 times in a row with a Xeon X5650 both with the 82 and the 83 BIOS. I have a ticket open for the issue, but the support has so far recommended downgrading the BIOS. 82 wouldn't resolve the issue, and no older BIOS is available for download on the support page.
Have you two heard about the mod for this? Apparently there's a motherboard mod to assist in using Xeons in a 758. There was a thread at Hard forum on it. Also, has anyone had issues with R9 290's and artifacts? Oddly, GPU-Z is showing it's in PCI 1.1 mode. I hope it's not a motherboard issue :/
|
mullhull
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2010/03/19 21:56:24
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/25 12:46:23
(permalink)
Have an X-58 132BL-E758 currently running E5520 xeon 2.27 downloaded bios update E758_83 burned image to disk booted from cd said it updated the bios but on startup splash screen and in windows 7/64 system information the bios still says AWARD 7.00 BIN FILE ____ E75883.bin was also downloaded with the image file I have an X5680 xeon hex core 3.33 that I would like to use with this board.In the Cpu support list the X5680 is listed but the footnote says :
* Westmere processors are only supported natively on the X58 SLI3, FTW3, and Classified3 Models. A product modification may be needed for older models.
SO MY QUESTIONS ARE :
1) why does the bios still say 7.00 ? said it flashed successfully off CD
2) do i need the E75883.bin file and if so how do I install it correctly ?
3) If I get the bios up to 8.3 correctly will this board support the above hex core processor ?
4) If it will not what is the fastest processor it will support ?
5) Updated the chipset with the 2014 update from the EVGA X58 download page
Any advice or help or suggestions are very appreciated the box is running well do not want to mess up a good thing do some rendering and the faster and bigger the better .Thanks in advance for any help experiance or suggestions.
|
bill1024
CLASSIFIED Member
- Total Posts : 3242
- Reward points : 0
- Joined: 2008/10/18 01:01:10
- Status: online
- Ribbons : 12
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/25 13:45:12
(permalink)
If it says this after the flash BIN FILE ____ E75883 I do believe the last two digits are the bios number. I think it flashed ok
Also since you are running a xeon E5520, you should be ok with the x5680.
Go ahead and install the x5680, worse thing that can happen is it will not boot. I bet you will be fine.
The x5690 or W3690 would be the fastest chips. But you can easily overclock that x5680 to 4 - 4.4ghz
I have x5660s running at 4ghz 24/7 no probelm.
Life is too short to carry a cheap pocket knife. CaseXX, Al Mar, Hubertus, Frank b, A\B, SchattMorgan U25ITA93JV 
|
mullhull
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2010/03/19 21:56:24
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/25 18:20:20
(permalink)
bill 1024
Thanks for the heads up and advice the only place the E75883.bin appears is in my download folder downloaded with the cd image for the bios update. As far as I can see the 8.3 was never installed because the bios splash screen and system inforamation say 7.0. I tried the X5680 with the the existing bios got no beep at startup no boot no video put the E5520 back in no problem boots normally since the 8.3 bios says it updates the CPU compatibility, I would like to at least try it do you know what version of bios you have ? any tips from anyone on why even thogh the bios CD said it wrote sucessfully after rebooting there was no change from the old version ? do I have to direct the flash to the new bin file ? any thoughts or tips are appreciated. bill thanks for the quick response
|
bill1024
CLASSIFIED Member
- Total Posts : 3242
- Reward points : 0
- Joined: 2008/10/18 01:01:10
- Status: online
- Ribbons : 12
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/25 21:09:43
(permalink)
I don't think 7.0 matters, the BIOS ver. is the last 2 numbers in that string of numbers. 07xxxxxx83 is bios 83 07xxxx81 is bios 81
I know some older boards need a hard mod on the board to run the x56xx chips.
I found this post and I do believe it to be true.
I myself have 2 EVGA FTW3 boards and 2 Asus x58 boards. The Asus would not boot an E5620 without the newest BIOS, that's why I figured you can boot with a xeon so the other xeon would work, I guess I was wrong. This is what I found. What Rev. board do you have?
Also the program CPUZ under the section motherboard, it will tell you what BIOS is installed.
Here's a list for Evga mobo's that support -EP Xeon's & the minimum Rev. required to run them.
E757 - Rev. 1.1
E758 - Rev. 1.2
E760 - Rev. 1.1
E762 - Rev. 1.1
E767 - All
E768 - All
Most of the Rev. 1.0 boards do need a hard mod in order to use -EP Xeons.
Life is too short to carry a cheap pocket knife. CaseXX, Al Mar, Hubertus, Frank b, A\B, SchattMorgan U25ITA93JV
|
mullhull
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2010/03/19 21:56:24
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/26 07:49:09
(permalink)
bill thanks again for all your time I will follow up with your suggestions and help when I get home .Have a great week !!!
|
GEORGIAN
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2009/10/18 07:42:03
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/26 16:48:59
(permalink)
How to check which BIOS i have? I installed E760 83 BIOS year ago but i dont see any "#83" on startup.
EVGA CLASSIFIED 141-BL-E760-A1 Intel Xeon w5680 with CM v8 HSF 14GB RAM(OCZ XMP 6GB+Crucial 8GB DDR3 1600 ) 256GB Samsung PRO SSD + 2TB SMS F4 + 1TB WD BL + 2x3TB Toshiba HDD's CORSAIR CMPSU-750HX 750W PSU XFX Radoen 5850 1Gb DDR5 LG W2453V-PF Black 24" 2ms LCD LG WH10LS30K 10X Blu-ray Burner Logitech G9 Windows 8 PRO x64 CM SNIPER
|
mullhull
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2010/03/19 21:56:24
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/26 17:11:11
(permalink)
In windows 7 if you go to accessories system information it tells you the bios version would think the same on windows 8
|
bill1024
CLASSIFIED Member
- Total Posts : 3242
- Reward points : 0
- Joined: 2008/10/18 01:01:10
- Status: online
- Ribbons : 12
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/26 19:55:50
(permalink)
CPU-Z is a nice little free program that will tell you a lot about your CPU and memory and motherboard. It can tell how fasr everything is running, what the memory timings are and what they can be set to. Get it here. http://www.cpuid.com/softwares/cpu-z.html
Life is too short to carry a cheap pocket knife. CaseXX, Al Mar, Hubertus, Frank b, A\B, SchattMorgan U25ITA93JV
|
mullhull
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2010/03/19 21:56:24
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/27 06:41:02
(permalink)
bill checked my E-58 don't see any revisions any idea what the hard mod costs who I would contact ??
|
bill1024
CLASSIFIED Member
- Total Posts : 3242
- Reward points : 0
- Joined: 2008/10/18 01:01:10
- Status: online
- Ribbons : 12
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/05/27 11:38:21
(permalink)
Take another look. It is small writing and it will be on the outside edge, most all the time closer to the corner of the motherboard.
It looks like Rev.1.1 Rev.2.0
CPUZ I believe will tell you what board and Rev. you have
If needed, some people do the mod themselves, EVGA tech support can do it for you.
Life is too short to carry a cheap pocket knife. CaseXX, Al Mar, Hubertus, Frank b, A\B, SchattMorgan U25ITA93JV
|
529th
ACX Member
- Total Posts : 378
- Reward points : 0
- Joined: 2009/08/18 17:38:02
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/06/20 08:48:40
(permalink)
Windows 7 64 Pro, Power Scheme on High
e760 A1 - latest bios, i7 970
Speedstep = enabled
Turbo mode Function = enabled
CxE = Auto
CPU Host Frequency (Mhz) = Auto
CPU Clock Ration = 24 - there is not "auto" option just 12 through 24
Observing for the 25x and 26x multi via HWinfo64, Realtemp GT, CPUz, etc.
HOW DO WE GET THE 25 & 26 MULTIPLIER TO WORK???
|
Diff_1
CLASSIFIED Member
- Total Posts : 4949
- Reward points : 0
- Joined: 2007/06/08 23:08:44
- Status: offline
- Ribbons : 31
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/06/23 16:06:51
(permalink)
529th
Windows 7 64 Pro, Power Scheme on High
e760 A1 - latest bios, i7 970
Speedstep = enabled
Turbo mode Function = enabled
CxE = Auto
CPU Host Frequency (Mhz) = Auto
CPU Clock Ration = 24 - there is not "auto" option just 12 through 24
Observing for the 25x and 26x multi via HWinfo64, Realtemp GT, CPUz, etc.
HOW DO WE GET THE 25 & 26 MULTIPLIER TO WORK???
If I remember correctly the turbo mode function = enabled you have listed above means it will automatically add the 25th and 26th multiplier if needed but only on a single threaded application and I believe only on one CPU core.
EVGA x58 E758 BIOS 83, i7 920 C0 @ 3.3GHZ, Corsair 750TX, EVGA GTX 480 HC FTW 11th anniversary prize THX EVGA, OCZ3P1600LV6GK, OCZ Vertex 2 SSD 120GB, Logitech X-540 5.1, LG W2453V, Swiftech H20-220-Ultra-GT WC kit with XSPC rx360, Windows 7 pro 64 bit OEM
|
529th
ACX Member
- Total Posts : 378
- Reward points : 0
- Joined: 2009/08/18 17:38:02
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/06/23 16:38:06
(permalink)
Diff_1
529th
Windows 7 64 Pro, Power Scheme on High
e760 A1 - latest bios, i7 970
Speedstep = enabled
Turbo mode Function = enabled
CxE = Auto
CPU Host Frequency (Mhz) = Auto
CPU Clock Ration = 24 - there is not "auto" option just 12 through 24
Observing for the 25x and 26x multi via HWinfo64, Realtemp GT, CPUz, etc.
HOW DO WE GET THE 25 & 26 MULTIPLIER TO WORK???
If I remember correctly the turbo mode function = enabled you have listed above means it will automatically add the 25th and 26th multiplier if needed but only on a single threaded application and I believe only on one CPU core.
Apparently the motherboard needs a hard mod for turbo to work = http://forums.evga.com/BL141E760A1-EVGA-Classified-Motherboards-Need-EVGA-Tech-Support-Modification-w970-CPU-m872663.aspx i knew about the Xeon mod but a motherboard mod for turbo to work is odd. I already sent the board in to EVGA and requested both the Xeon mod, and Turbo mod to be done. I'm more interested in the Turbo working. I do have an X5660 laying around but I'd rather use the i7 970
|
mullhull
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2010/03/19 21:56:24
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/06/27 17:38:01
(permalink)
Turned out my x58 was the first edition and would not support my 3.33 westmere xeon. I contacted support Jaeson and Spenser were both great they got the westmere mod done and a couple of other repairs the board I purchased used had been treated a little roughly. The price for the mod is totally worth it to me . I use the board for 3D stuff running the hex processor speeds up everything. The guys followed up with me and got the board back to me quickly as they could , the board has been working great . A shout out to EVGA support for a great job !!! A Great Weekend to all thanks to you guys here for responding to my questions
|
529th
ACX Member
- Total Posts : 378
- Reward points : 0
- Joined: 2009/08/18 17:38:02
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/06/27 17:54:19
(permalink)
mullhull
Turned out my x58 was the first edition and would not support my 3.33 westmere xeon. I contacted support Jaeson and Spenser were both great they got the westmere mod done and a couple of other repairs the board I purchased used had been treated a little roughly. The price for the mod is totally worth it to me . I use the board for 3D stuff running the hex processor speeds up everything. The guys followed up with me and got the board back to me quickly as they could , the board has been working great . A shout out to EVGA support for a great job !!! A Great Weekend to all thanks to you guys here for responding to my questions
Awesome dude! Congrats! I'm excited myself. I sent in my board to mainly have the Turbo looked at. My i7 970 would not use the 25x in any bios configuration. I told them to do the Westmere mod while they were at it. I hope they fix anything else that isn't in good shape. Congrats again!
|
luv2increase
CLASSIFIED ULTRA Member
- Total Posts : 5280
- Reward points : 0
- Joined: 2008/12/31 16:26:56
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/07/02 16:24:10
(permalink)
I have the 760. I did the hardware mod to be able to use my westmere x5650 chip. I have a hardware raid card that was not recognized by BIOS 83. I still had my 920 in when I updated the BIOS. I installed an earlier BIOS I found somewhere, #44 I believe.
So, does anyone has a link to #77 or anything from #77 - #82 I could try. Could a moderator please put a download link for other BIOS versions I could try for the e760? Please, I would love to put the x5650 in here. I put 12gb of RAM in it along with a gtx 960 and hardware raid card along with 4xssd in RAID-0 a few months ago to get more life out of my x58 platform to use it for another 2 years.
Thank you so much!!!
HEATWARE - Intel Core i7 920 @ 4.1Ghz 24/7 * Have x5650 Xeon 6c/12t want to install!!! - Corsair Dominator 12GB - EVGA x58 Classified 760 - MSI GTX 960 - MegaRAID 9260-8i Raid Card - 4 x Samsung 850 EVO 120GB in Raid-0 - 4 x Samsung EcoGreen 1.5TB - Thermaltake Toughpower 1200W - IKONIK Ra X10 SIM - Pioneer BD-RW - 46" Samsung LN46A630 1080p - Windows 10 Professional Build 10147
|
HeavyHemi
Omnipotent Enthusiast
- Total Posts : 10929
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 57
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/07/03 18:37:27
(permalink)
529th
mullhull
Turned out my x58 was the first edition and would not support my 3.33 westmere xeon. I contacted support Jaeson and Spenser were both great they got the westmere mod done and a couple of other repairs the board I purchased used had been treated a little roughly. The price for the mod is totally worth it to me . I use the board for 3D stuff running the hex processor speeds up everything. The guys followed up with me and got the board back to me quickly as they could , the board has been working great . A shout out to EVGA support for a great job !!! A Great Weekend to all thanks to you guys here for responding to my questions
Awesome dude! Congrats!
I'm excited myself. I sent in my board to mainly have the Turbo looked at. My i7 970 would not use the 25x in any bios configuration. I told them to do the Westmere mod while they were at it. I hope they fix anything else that isn't in good shape. Congrats again!
They still have BIOS 82, here: http://www.evga.com/support/download/default.aspxHere's a link to the ISO for BIOS 77: http://cdn.evga.com/bios/x58/E760_77.iso
post edited by EVGATech_DaveB - 2016/02/10 11:09:17
EVGA E758/i7 980x 4.3ghz 1.36v 12GB Corsair Dominator 2000C9 GTX 980Ti w/GTX TITAN SC for PhysX Crucial M4 512GB SSD/2x WD RE4 Black 2TB Corsair H50 Cooler/Corsair AX1200/Window 10 Pro
|
Diff_1
CLASSIFIED Member
- Total Posts : 4949
- Reward points : 0
- Joined: 2007/06/08 23:08:44
- Status: offline
- Ribbons : 31
Re:EVGA X58 Motherboards - BIOS 83 Released
2015/07/13 22:50:29
(permalink)
HeavyHemi
529th
mullhull
Turned out my x58 was the first edition and would not support my 3.33 westmere xeon. I contacted support Jaeson and Spenser were both great they got the westmere mod done and a couple of other repairs the board I purchased used had been treated a little roughly. The price for the mod is totally worth it to me . I use the board for 3D stuff running the hex processor speeds up everything. The guys followed up with me and got the board back to me quickly as they could , the board has been working great . A shout out to EVGA support for a great job !!! A Great Weekend to all thanks to you guys here for responding to my questions
Awesome dude! Congrats!
I'm excited myself. I sent in my board to mainly have the Turbo looked at. My i7 970 would not use the 25x in any bios configuration. I told them to do the Westmere mod while they were at it. I hope they fix anything else that isn't in good shape. Congrats again!
They still have BIOS 82, here:
http://www.evga.com/support/download/default.aspx
Here's a link to the ISO for BIOS 77: http://cdn.evga.com/bios/x58/E760_77.iso
Yea usually (well years ago) with the BIOS you can just for example replace the 77 in the link above with whatever version you want. Yep just tested it and it still works only one that does not seem to exist is version 79. No clue if it ever existed though. Remember people The link above is for the classified E760 version of the x58 motherboard. That may or may not apply to your motherboard.
post edited by EVGATech_DaveB - 2016/02/10 11:10:35
EVGA x58 E758 BIOS 83, i7 920 C0 @ 3.3GHZ, Corsair 750TX, EVGA GTX 480 HC FTW 11th anniversary prize THX EVGA, OCZ3P1600LV6GK, OCZ Vertex 2 SSD 120GB, Logitech X-540 5.1, LG W2453V, Swiftech H20-220-Ultra-GT WC kit with XSPC rx360, Windows 7 pro 64 bit OEM
|
