_ShannonR
SSC Member
- Total Posts : 634
- Reward points : 0
- Joined: 2009/04/16 17:47:03
- Status: offline
- Ribbons : 2
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/10 01:29:59
(permalink)
lcabezas
With the latest bios 80 my computer hangs at shutdown sometimes. It happens when I put my computer to sleep once throughout the day. At night when I go to sleep and shut down my computer it hangs. My monitor turns off and everything but the computer still on. I uploaded a video showing that everything is running like the cpu fan, graphics fan, and the motherboard still on. This never happened in the last bios.
I already email Jacob about it but no response yet. Last bios I never had this problem.
Another problem too is that my monitor sometimes will stay off when I start my computer from cold boot or sleep. The computer starts normally but my monitor stays off. I have to manually turn off and on the monitor to show the desktop.
Here is the vid on youtube of my computer hanging at shutdown:
http://youtu.be/i2OezxACalE
Here are my bios settings (Same settings I used in the previos bios and never had a problem for many months):
Hello the system appearing to shut down but everything staying on sounds like your OS is requesting a sleep state. sounds like your entering apm state not acpi. is acpi sleep states enabled in the bios?
ASUS Rampage IV Black Edition 3 Way TITAN Blacks TPX-1475 PSU LSI SSD RAID 4960X 5.0GHz on Water 64GB Patriot Viper 2400 Overclocking Graveyard Too many new chips to list.....980X I forget how high LN2,W3580 5.7 GHz 1.79V on LN2, W3520 4.9GHz 1.57V on LN2, E8600 5.9Ghz 1.68V on Dice, E8400 5.5Ghz 1.68V on Dice, Q6600 4.7Ghz 1.52V on Dice, Cel 430 4.2Ghz 1.62V on Dice
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/10 03:36:47
(permalink)
martigen
lcabezas
With the latest bios 80 my computer hangs at shutdown sometimes. It happens when I put my computer to sleep once throughout the day. At night when I go to sleep and shut down my computer it hangs. My monitor turns off and everything but the computer still on. I uploaded a video showing that everything is running like the cpu fan, graphics fan, and the motherboard still on. This never happened in the last bios.
This is a known problem, and it *does* happen with previous BIOSes. I had it in 77 and I have it in 80 now as well.
This is one of the many annoying problems I've found with EVGA boards that other manufacturers don't appear to suffer. Next on my PLEASE FIX IT list is the VT double-pump. After that, I'd like this bug fixed too -- I reported this a few pages back, but wasn't able to determine what triggers it, so if you have that's fantastic and hopefully EVGA will be able to narrow down the cause.
As an aside: isn't that VTT way past Intel spec of 1.4 max (I'd imagine you're on 1.6 with +325)? If it works great, but for how long? :)
I thought it was just happening to me. Too bad a lot of bugs still left to fix on EVGA boards after 2 years if owning 759 Classified motherboard. I though by now we would have something a lot more stable. The bugs are very annoying and they don't seem to be happening to other X58 board manufacturers. I hope that Jacob sees my email and my post about the bugs I listed cause they certainly are very annoying and shouldn't be happening on their high end boards. Yes VTT is high but I need to to keep my CPU stable with my memory. Don't know how long it will last but as long as it lasts me another year or two I'll be fine.
CPU: Intel 4930K@4.5Ghz Motherboard: Evga X79 Dark VGA: 2x Sapphire 290X Crossfire Memory: 16GB Corsair Dominator Platinum 2600 Hard Drives: 2x Sandisk Extreme II 480GB SSD Raid0 - 2x WD RE4 2GB RAID1 Sound Card: Creative ZX PSU: Corsair AX1200i Case: CaseLabs STH10 w/ Aquaero 5 XT, Aquacomputer Flow Meter, and three PowerAdjust2
Heatware Luis1985: http://www.heatware.com/eval.php?id=67113
|
RaptorX86
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2011/04/07 12:30:40
- Location: Italy
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/10 06:11:24
(permalink)
When exit the official bios 80? :D
MOTHERBOARD: EVGA E762 CLASSIFIED 4 WAY SLI CPU: INTEL i7 980X @ 4Ghz RAM: G.SKILL TRIDENT 3x4GB 2000Mhz (8 9 8 24) 12GB VGA: 2 ZOTAC GTX580 SLI HARD DISK: 2 VERTEX 2E 60GB RAID 0 - 2 VELOCIRAPTOR 150GB RAID 0 SOUND CARD: SOUND BLASTER X-FI TITANIUM PCI.E CD ROM/BLU RAY: LG BH10LS30 (BLU RAY) - LG GH24NS50
|
Arctucas
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2007/05/20 15:35:18
- Status: offline
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/10 07:16:30
(permalink)
Also, I wonder about the 4GHz+ Uncore.
|
evgamenbre1000
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2010/03/21 03:29:48
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/10 09:43:15
(permalink)
martigen
Yaboze
I appreciate that Jacob and EVGA came though with this 80 Beta, but personally, my beef was with the VT double pump, the Raid BIOS is just a bonus (for me).
I'm going to wait until that is put in, but since it hasn't even been mentioned, I'm doubtful we'll ever see it fixed.
I think we will -- EVGA has come through with the new ROMs as requested, and that's the harder and bigger job than fixing double-pump VT. As I understand it, a fix was already used in the past but removed because some people had problems (but others didn't). At the very least they could easily add that again and let those of use who use VT frequently try it out, even as a beta BIOS.
There have been enough people asking for this that it has to be top priority next on their list. For me, whether this gets fixed determines whether I buy EVGA boards in future.
---------------------------------- I'm ok with martigen, I also request corrections in the next bios (not 6 months). Why is long with EVGA to get the correct bios? Dual booting is really bad for the hardware (hdd) so now we must work to finally remove it, and why not do bios beta 80 with the correction if it works for sure, if this does not work, ok go back to official bios 80 and here, in the meantime. I acknowledge the work for new bios and am happy about that but now we must continue, not stop for 3 months as before. For me too, it'll be the first factor to purchase new EVGA
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/10 12:44:05
(permalink)
the only problem im having with 80 is returning from sleep i loose sound, i have to go into xfi settings panel turn off DDLIVE and then back on again no big deal just annoying. 
Attached Image(s)
never attempt to remove a fly from your friends head with a meat cleaver .
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 12:13:44
(permalink)
The next BIOS we are progressing on. We are looking to fix the screen refresh when Intel RAID Rom shows (already fixed) and also enable dynamic voltage when turbo is enabled and voltage set manually (still testing)
 jfreeZr - [rebuilding] 4770k @ 5.2ghz || evga z87 classified || 2x evga gtx 980 acx2 || 16gb 2.6ghz ddr3 || 500gb 840 evo raid0 || evga supernova 1000 P2 hadronGTX - 4770k @ 4.4ghz || evga z9 stinger || evga gtx780 ti acx || 16GB 2.6ghz ddr3 || 480gb vertex3 raid0 || 500w gold
|
kingofsorrow
FTW Member
- Total Posts : 1892
- Reward points : 0
- Joined: 2007/03/08 07:11:22
- Location: Russian Federation
- Status: offline
- Ribbons : 2
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 12:29:31
(permalink)
Can you make the first screen to appear for a little longer period of time? The one with the system info, bios, gpus number etc. It boots so fast that it does't show up ))
i7 990x@ 4.41Ghz 1.375v | Evga Classified E762 | 12Gb CM12GX3M3A2000C9 | GeForce Titan X SLi | HAF-X | ST1500
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 12:41:07
(permalink)
thanx jacob do you mean, fix manual voltage not dropping with speed step that would be a nice fix.
never attempt to remove a fly from your friends head with a meat cleaver .
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 13:10:51
(permalink)
Jacob,
How about the option to disable the marvell controller in the bios.. seems to be missing in ver80. I dont use it so I like to disable things I dont use in the bios to keep system resources as free as possible.
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 13:35:47
(permalink)
kingofsorrow
Can you make the first screen to appear for a little longer period of time? The one with the system info, bios, gpus number etc. It boots so fast that it does't show up ))
press the pause/break button 
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 13:37:13
(permalink)
woojyee
Jacob,
How about the option to disable the marvell controller in the bios.. seems to be missing in ver80. I dont use it so I like to disable things I dont use in the bios to keep system resources as free as possible.
Wow really, they took it out? 
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 13:53:07
(permalink)
its not missing its called SATA 6 controller just not label marvell anymore.
|
kingofsorrow
FTW Member
- Total Posts : 1892
- Reward points : 0
- Joined: 2007/03/08 07:11:22
- Location: Russian Federation
- Status: offline
- Ribbons : 2
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 14:17:49
(permalink)
Nereus
kingofsorrow
Can you make the first screen to appear for a little longer period of time? The one with the system info, bios, gpus number etc. It boots so fast that it does't show up ))
press the pause/break button
It doesn't even appear really, it's only possible to pause the raid screen by pressing the pause/break button during the post. Not a big deal thou...
i7 990x@ 4.41Ghz 1.375v | Evga Classified E762 | 12Gb CM12GX3M3A2000C9 | GeForce Titan X SLi | HAF-X | ST1500
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 14:42:21
(permalink)
5thduke
thanx jacob do you mean, fix manual voltage not dropping with speed step that would be a nice fix.
Yes
jfreeZr - [rebuilding] 4770k @ 5.2ghz || evga z87 classified || 2x evga gtx 980 acx2 || 16gb 2.6ghz ddr3 || 500gb 840 evo raid0 || evga supernova 1000 P2 hadronGTX - 4770k @ 4.4ghz || evga z9 stinger || evga gtx780 ti acx || 16GB 2.6ghz ddr3 || 480gb vertex3 raid0 || 500w gold
|
kingofsorrow
FTW Member
- Total Posts : 1892
- Reward points : 0
- Joined: 2007/03/08 07:11:22
- Location: Russian Federation
- Status: offline
- Ribbons : 2
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 17:13:32
(permalink)
Hey, I think I have found a bug: When I connected my second raid 0 array... ... EDIT: I take back what I said - it's not a bios bug, it's something in my system on software level. Reconnected using different cables the second raid array to sata 4.5 instaed of sata 2.3, reinstalled the intel drivers - as the result, the system loads with both arrays everytime.
post edited by kingofsorrow - 2011/04/12 11:59:48
i7 990x@ 4.41Ghz 1.375v | Evga Classified E762 | 12Gb CM12GX3M3A2000C9 | GeForce Titan X SLi | HAF-X | ST1500
|
evgamenbre1000
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2010/03/21 03:29:48
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 17:17:53
(permalink)
EVGA_JacobF thank you again for your work and continue with new bios. Really try to fix the boot 2 times would be great, many people ask this, (and also our hard drives). We appreciate your business. 
|
boldencrazy
Superclocked Member
- Total Posts : 125
- Reward points : 0
- Joined: 2008/07/20 00:48:35
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 17:19:12
(permalink)
I like the new dynamic vcore. Both vcore and clock go down in idle state.
EVGA X58 FTW3 E768 Bios 82 i7 920 D0 @ 4.2GHz HT Thermalright Ultra 120 Extreme 6GB Corsair Dominator GT 1600MHz 7-7-7 [Elpida BBSE] Sapphire HD5850 Toxic WDC Black 1TB 64MB Antec 850w HAF 932
|
Zaskar
SSC Member
- Total Posts : 654
- Reward points : 0
- Joined: 2007/10/14 08:31:10
- Status: offline
- Ribbons : 2
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 17:32:23
(permalink)
EVGA_JacobF
The next BIOS we are progressing on. We are looking to fix the screen refresh when Intel RAID Rom shows (already fixed) and also enable dynamic voltage when turbo is enabled and voltage set manually (still testing)
Awesome news! Is it possible if you could let us know if your considering using the Intel version of the AHCI rom instead of Pheonix's? Or if there is some unforeseen problem with using it? Most people were kind of expecting that to be part of the Raid bios update since unlike the raid rom when it was manually added it worked, but it must use a different syntax then the Pheonix since the bios cant communicate with it. I know allot of people have been hoping for that, and it would benefit everyone, not just those with a Raid volume.
post edited by Zaskar - 2011/04/11 17:35:29
EVGA X58 Classified Intel i7 975 Corsair Dominator 1600mhz 3x2gb Nvidia GTX 295 Auzentech X-Fi Forte
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 17:40:40
(permalink)
The Intel RAID rom has not been fully tested, so there are no plans to move to it at this time.
Also we are still working on the VT double boot.
jfreeZr - [rebuilding] 4770k @ 5.2ghz || evga z87 classified || 2x evga gtx 980 acx2 || 16gb 2.6ghz ddr3 || 500gb 840 evo raid0 || evga supernova 1000 P2 hadronGTX - 4770k @ 4.4ghz || evga z9 stinger || evga gtx780 ti acx || 16GB 2.6ghz ddr3 || 480gb vertex3 raid0 || 500w gold
|
lam_das
SSC Member
- Total Posts : 714
- Reward points : 0
- Joined: 2009/06/07 17:34:53
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 19:12:29
(permalink)
EVGA_JacobF Also we are still working on the VT double boot.
That would be the one to fix! Kudos to you in advance...  And if you have some spare development cycles, please concentrate on S3 problems as well. Right now manual vcore and S3 don't work together. 3rd wake from sleep reboots instead of resuming.
EVGA X58 SLI Rev 1.1 i7 920 D0 LinX/Prime Stable 4.4(21x210) HT ON 1.3125vcore, +100mV, vDIMM 1.625v, Rest Auto OCZ Gold 6GB 1680 (2:8) 9 9 9 24 1T Prolimatech Megahalems (Push/Pull) Because of S3 issues: 21x196, Auto vcore, 2:8, 8-8-8-24-1T 12GB.
|
HeavyHemi
Omnipotent Enthusiast
- Total Posts : 10929
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 57
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 21:58:46
(permalink)
EVGA E758/i7 980x 4.3ghz 1.36v 12GB Corsair Dominator 2000C9 GTX 980Ti w/GTX TITAN SC for PhysX Crucial M4 512GB SSD/2x WD RE4 Black 2TB Corsair H50 Cooler/Corsair AX1200/Window 10 Pro
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 22:02:37
(permalink)
EVGA_ShannonR
lcabezas
With the latest bios 80 my computer hangs at shutdown sometimes. It happens when I put my computer to sleep once throughout the day. At night when I go to sleep and shut down my computer it hangs. My monitor turns off and everything but the computer still on. I uploaded a video showing that everything is running like the cpu fan, graphics fan, and the motherboard still on. This never happened in the last bios.
I already email Jacob about it but no response yet. Last bios I never had this problem.
Another problem too is that my monitor sometimes will stay off when I start my computer from cold boot or sleep. The computer starts normally but my monitor stays off. I have to manually turn off and on the monitor to show the desktop.
Here is the vid on youtube of my computer hanging at shutdown:
http://youtu.be/i2OezxACalE
Here are my bios settings (Same settings I used in the previos bios and never had a problem for many months):
Hello the system appearing to shut down but everything staying on sounds like your OS is requesting a sleep state.
sounds like your entering apm state not acpi.
is acpi sleep states enabled in the bios?
Sorry I did not answer earlier but I somehow missed your reply.  That is my settings that I have... When the computer hangs in shutdown, all I do is press shutdown in Windows 7. Nothing else. The only thing I notice is that it happens when in the day I put my computer to sleep at least once. Doesn't happen always but it has happen when I put my computer to sleep at least once in the day, when I go to shutdown my computer the computer hangs just like I showed in the video. Not sure if sleep causes this but shutdown hasn't hanged when I don't put my computer to sleep at least once in the day. So I'm thinking it has to do with sleep with the latest bios. At least for me, this hasn't happened in the previous bios just the new 80 bios.
CPU: Intel 4930K@4.5Ghz Motherboard: Evga X79 Dark VGA: 2x Sapphire 290X Crossfire Memory: 16GB Corsair Dominator Platinum 2600 Hard Drives: 2x Sandisk Extreme II 480GB SSD Raid0 - 2x WD RE4 2GB RAID1 Sound Card: Creative ZX PSU: Corsair AX1200i Case: CaseLabs STH10 w/ Aquaero 5 XT, Aquacomputer Flow Meter, and three PowerAdjust2
Heatware Luis1985: http://www.heatware.com/eval.php?id=67113
|
lam_das
SSC Member
- Total Posts : 714
- Reward points : 0
- Joined: 2009/06/07 17:34:53
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/11 22:51:02
(permalink)
EVGA X58 SLI Rev 1.1 i7 920 D0 LinX/Prime Stable 4.4(21x210) HT ON 1.3125vcore, +100mV, vDIMM 1.625v, Rest Auto OCZ Gold 6GB 1680 (2:8) 9 9 9 24 1T Prolimatech Megahalems (Push/Pull) Because of S3 issues: 21x196, Auto vcore, 2:8, 8-8-8-24-1T 12GB.
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/12 00:55:52
(permalink)
For those of you who use VT and don't like the double boot, and are interested in testing a possible release candidate BIOS, can you send me a mail at jacobf@evga.com Make sure to specify the motherboard you have.
jfreeZr - [rebuilding] 4770k @ 5.2ghz || evga z87 classified || 2x evga gtx 980 acx2 || 16gb 2.6ghz ddr3 || 500gb 840 evo raid0 || evga supernova 1000 P2 hadronGTX - 4770k @ 4.4ghz || evga z9 stinger || evga gtx780 ti acx || 16GB 2.6ghz ddr3 || 480gb vertex3 raid0 || 500w gold
|
RaptorX86
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2011/04/07 12:30:40
- Location: Italy
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/12 01:22:20
(permalink)
But "Rom RAID Intel per 10.5.0.744" will always be used in the next bios? Thx
MOTHERBOARD: EVGA E762 CLASSIFIED 4 WAY SLI CPU: INTEL i7 980X @ 4Ghz RAM: G.SKILL TRIDENT 3x4GB 2000Mhz (8 9 8 24) 12GB VGA: 2 ZOTAC GTX580 SLI HARD DISK: 2 VERTEX 2E 60GB RAID 0 - 2 VELOCIRAPTOR 150GB RAID 0 SOUND CARD: SOUND BLASTER X-FI TITANIUM PCI.E CD ROM/BLU RAY: LG BH10LS30 (BLU RAY) - LG GH24NS50
|
rafale
FTW Member
- Total Posts : 1582
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/12 01:30:29
(permalink)
lcabezas
EVGA_ShannonR
lcabezas
With the latest bios 80 my computer hangs at shutdown sometimes. It happens when I put my computer to sleep once throughout the day. At night when I go to sleep and shut down my computer it hangs. My monitor turns off and everything but the computer still on. I uploaded a video showing that everything is running like the cpu fan, graphics fan, and the motherboard still on. This never happened in the last bios.
I already email Jacob about it but no response yet. Last bios I never had this problem.
Another problem too is that my monitor sometimes will stay off when I start my computer from cold boot or sleep. The computer starts normally but my monitor stays off. I have to manually turn off and on the monitor to show the desktop.
Here is the vid on youtube of my computer hanging at shutdown:
http://youtu.be/i2OezxACalE
Here are my bios settings (Same settings I used in the previos bios and never had a problem for many months):
Hello the system appearing to shut down but everything staying on sounds like your OS is requesting a sleep state.
sounds like your entering apm state not acpi.
is acpi sleep states enabled in the bios?
Sorry I did not answer earlier but I somehow missed your reply.
That is my settings that I have... When the computer hangs in shutdown, all I do is press shutdown in Windows 7. Nothing else. The only thing I notice is that it happens when in the day I put my computer to sleep at least once. Doesn't happen always but it has happen when I put my computer to sleep at least once in the day, when I go to shutdown my computer the computer hangs just like I showed in the video.
Not sure if sleep causes this but shutdown hasn't hanged when I don't put my computer to sleep at least once in the day. So I'm thinking it has to do with sleep with the latest bios. At least for me, this hasn't happened in the previous bios just the new 80 bios.
I am observing exactly the same thing with this BIOS. Computer would appear to shut down. Windows has gone through its shutdown screen. The power led is off but the fans keep on spinning and the motherboard is still powered. This happens only if I have previously put my computer in standby.
|
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/12 01:44:45
(permalink)
rafale
lcabezas
EVGA_ShannonR
lcabezas
With the latest bios 80 my computer hangs at shutdown sometimes. It happens when I put my computer to sleep once throughout the day. At night when I go to sleep and shut down my computer it hangs. My monitor turns off and everything but the computer still on. I uploaded a video showing that everything is running like the cpu fan, graphics fan, and the motherboard still on. This never happened in the last bios.
I already email Jacob about it but no response yet. Last bios I never had this problem.
Another problem too is that my monitor sometimes will stay off when I start my computer from cold boot or sleep. The computer starts normally but my monitor stays off. I have to manually turn off and on the monitor to show the desktop.
Here is the vid on youtube of my computer hanging at shutdown:
http://youtu.be/i2OezxACalE
Here are my bios settings (Same settings I used in the previos bios and never had a problem for many months):
Hello the system appearing to shut down but everything staying on sounds like your OS is requesting a sleep state.
sounds like your entering apm state not acpi.
is acpi sleep states enabled in the bios?
Sorry I did not answer earlier but I somehow missed your reply.
That is my settings that I have... When the computer hangs in shutdown, all I do is press shutdown in Windows 7. Nothing else. The only thing I notice is that it happens when in the day I put my computer to sleep at least once. Doesn't happen always but it has happen when I put my computer to sleep at least once in the day, when I go to shutdown my computer the computer hangs just like I showed in the video.
Not sure if sleep causes this but shutdown hasn't hanged when I don't put my computer to sleep at least once in the day. So I'm thinking it has to do with sleep with the latest bios. At least for me, this hasn't happened in the previous bios just the new 80 bios.
I am observing exactly the same thing with this BIOS. Computer would appear to shut down. Windows has gone through its shutdown screen. The power led is off but the fans keep on spinning and the motherboard is still powered. This happens only if I have previously put my computer in standby.
Three people testing this bios now have the same bug happening to them. Definitely a bug EVGA as to look into.
CPU: Intel 4930K@4.5Ghz Motherboard: Evga X79 Dark VGA: 2x Sapphire 290X Crossfire Memory: 16GB Corsair Dominator Platinum 2600 Hard Drives: 2x Sandisk Extreme II 480GB SSD Raid0 - 2x WD RE4 2GB RAID1 Sound Card: Creative ZX PSU: Corsair AX1200i Case: CaseLabs STH10 w/ Aquaero 5 XT, Aquacomputer Flow Meter, and three PowerAdjust2
Heatware Luis1985: http://www.heatware.com/eval.php?id=67113
|
martigen
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2010/12/18 21:36:02
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/12 02:23:46
(permalink)
EVGA_JacobF
Also we are still working on the VT double boot.
Thankyou :)
|
boldencrazy
Superclocked Member
- Total Posts : 125
- Reward points : 0
- Joined: 2008/07/20 00:48:35
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 80 BETA Released
2011/04/12 02:24:37
(permalink)
EVGA_JacobF
The next BIOS we are progressing on. We are looking to fix the screen refresh when Intel RAID Rom shows (already fixed) and also enable dynamic voltage when turbo is enabled and voltage set manually (still testing)
Hey Jacob, about the dynamic voltage, it is working fine. I'm using 191bclk with turbo 21x and vcore is set manually to 1.35000v and CPU-Z report vcore at idle 1.07v @ 2.2GHz and it go up to 4.0GHz @ 1.33v under load.
EVGA X58 FTW3 E768 Bios 82 i7 920 D0 @ 4.2GHz HT Thermalright Ultra 120 Extreme 6GB Corsair Dominator GT 1600MHz 7-7-7 [Elpida BBSE] Sapphire HD5850 Toxic WDC Black 1TB 64MB Antec 850w HAF 932
|
