Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/13 15:21:24
(permalink)
Hey i am facing the same update problems
Just hangs!!!
tried doing it thru a CD and USB
Hangs at the same point...
Loading Caldera......
Nothing
Help!!!!
|
Yaboze
New Member
- Total Posts : 74
- Reward points : 0
- Joined: 2010/03/12 22:21:58
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/13 15:31:55
(permalink)
Hi, I'm new to the boards.
I can confirm for me that VT isn't working, it's turned on though. I'm not downgrading or doing anything until I hear back from Jacob or someone from EVGA. Everything else is fine for me though.
Intel i7 960 ∙ EVGA X58 X3 SLI ∙ 12GB G.Skill Ripjaws DDR3-1600 ∙ nVidia GTX 770 ∙ Intel 520 SSD ∙ Dell 2407WFP ∙ Corsair HX 1KW ∙ Windows 8.1 Pro
|
tfannon
SSC Member
- Total Posts : 573
- Reward points : 0
- Joined: 2006/01/10 23:55:37
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/13 16:00:39
(permalink)
to lam_das:
my VCORE for 190 is set @ 1.275 without VDroop. It is 5 LinX run stable at that along with other benchies. Just no 'cold' S3 resume.
- SB-2600k@4.6, Asrock Z77-Extreme4, 32GB, 2xRadeon 7970 Crossfire Dell 2714HM, Samsung 840 Pro, 2xCrucial M4 in RAID-0, Noctua 14, Thermaltake 750
- SB-2600k@4.6, EVGA Z68-SLI, 16GB, 2xGeforce 670 SLI 3x24 Dell 2407, Crucial M4, Noctua 12, Corsair 650
- iMac 27" 3.4ghz I7 SandyBridge, 12gb, Radeon 6970m, Intel 520 240gb SSD
- 2013 MacBook Pro w/Retina 13.3, 512SSD, 8GB
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/13 18:06:29
(permalink)
Well, I also have another bug to report. Seems if you have Turbo Performance Disabled and you have CxE set to either Auto or Cx whatever, Turbo Performance still kicks in. Real pita. I can't run any Cx settings unless I turn up my vcore and vtt which I don't want the heat.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/13 18:30:48
(permalink)
oK this is not working
can someone from eVGA tell me why?
It keeps hanging command prompt after loading.
Why?
I am running Windows 7 64 bit and never had this problem
|
BDW_88
ACX Member
- Total Posts : 277
- Reward points : 0
- Joined: 2006/05/07 20:50:18
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/13 21:31:01
(permalink)
ShockTheMonky
Well, I also have another bug to report. Seems if you have Turbo Performance Disabled and you have CxE set to either Auto or Cx whatever, Turbo Performance still kicks in. Real pita. I can't run any Cx settings unless I turn up my vcore and vtt which I don't want the heat.
Same problem here..
  Mountain Mods ex. Ascension + pedestal - EVGA X58 Classified (E759) - i7 980X @4.5 - 6990+6970 tri-fire
|
willdearborn
CLASSIFIED Member
- Total Posts : 2228
- Reward points : 0
- Joined: 2008/01/04 18:54:42
- Status: offline
- Ribbons : 4
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 01:52:44
(permalink)
This BIOS seems to be great so far. My OC voltages stayed the same. And it's cool that they fixed the double dump with VT enabled. It never bothered me, but it does makes me feel better for some unknown reason.  And, I'm sure this was mentioned, I didn't bother to read through the whole thread but, This BIOS is labeled as 49 but on my screen is says 50. I'm sure it means nothing, I was just curious as to why. Typo I guess?
2x EVGA GTX 1080 SLi • 43" 4K Wasabi Mango UHD430 • 3x 30" HP LP3065s ASUS Rampage IV Extreme • Intel Core i7 4820k • 16GB Corsair Vengeance Pro Lian Li PC D600WB • Corsair AX1200 • 2x Samsung 850 EVO 500GB SSDs in RAID 0 
|
dmoheban
FTW Member
- Total Posts : 1247
- Reward points : 0
- Joined: 2003/07/08 15:35:10
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 05:49:25
(permalink)
Seems like they should rename this bios to '49-beta'! Lol....
EVGA CLASSIFIED 759 - Intel 920 D0 CPU Corsair Dominators 3x2gb C7 1600mhz XFX 6970 Trifire - XFi Titanium Heatkiller 3.0 - XPSC RX360 Rad - MCP655  
|
firerx
CLASSIFIED Member
- Total Posts : 3051
- Reward points : 0
- Joined: 2007/01/28 12:52:50
- Location: Phoenix, Arizona
- Status: offline
- Ribbons : 4
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 06:16:55
(permalink)
fabbasi
oK this is not working
can someone from eVGA tell me why?
It keeps hanging command prompt after loading.
Why?
I am running Windows 7 64 bit and never had this problem
Did you figure it out yet? When you set to default prior to updating bios, you changed the location of your boot drive. Simply go back into bios and reassign the boot drive to boot first.
post edited by firerx - 2010/03/14 06:19:55
Asus Rampage V Extreme Edition 10
Intel Core i7 6900K Corsair Platinums 3000mhz 16gb EVGA GTX 1080 FE TT 1200w PSU Samsung 950 Pro M2 SSD 512gb Samsung 850 EVO SSD Samsumg 840 Pro SSD, Seagate 1TB drive LG 34" Monitor 3440 X 1440
|
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 08:40:01
(permalink)
EEhhh No
Boots fine but the system totally hangs
Am i to let it sit for a while to load?
|
cleancut
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2009/08/15 15:03:56
- Location: Indianapolis, IN
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 10:18:04
(permalink)
I could also confirm VT is broken w/ this release. Same with S3. Its changing memory latencies on wake. (see attached) What I have noticed is, even with Turbo Performance Disabled I still see my 22x multi with my i7-920. I am not complaining since its a nice boost, and my preivous OC worked flawlessly. I have not attempted to even turn Turbo Performance on actually. Just my 2 cents.. Cc_
post edited by cleancut - 2010/03/14 10:32:55
Attached Image(s) 
CPU: Intel Xeon X5660 w/ Swiftech H2O-220 Ultima XT (Apogee XT) Motherboard: eVGA x58 SLI LE w/ EK Full Cover Block Ram: Corsair Vengeance DDR3 1600mhz 24GB w/ Antec SpotCool Video: 2x GTX 570 w/ Full Cover Blocks in SLI GPU3: nVidia Geforce GT 720 Sound: Soundblaster X-Fi Titanium Fatality X-Ram pci-e HDTV-tuner: VisionTek ATi Theater HD650 Pro pci Add-On Card: Asus U3S6 USB-3.0/SATA-III controller Storage: 2x WD Blue 640GB in Raid0 + OCZ Synapse SSD Caching
|
nauman76
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2009/09/07 07:48:57
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 10:20:25
(permalink)
I upgraded from SZ2R on my vanilla x58 board... was there a change to CPU Vtt? I couldn't get back to stable 3.8GHz overclock without dropping the Vtt down. The voltage monitor shows Vtt 0.1V higher than it is set... I know probably not accurate, but I don't remember it being this way.
Thanks for any insight...
|
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 10:24:14
(permalink)
I tried flashing with USB still hangs
|
Exsomos
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2009/09/04 22:52:51
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 12:44:42
(permalink)
Really wish this S3 sleep would work. I used it a ton on my old rig. Mine just hangs for like 2 minutes then finally responds. Takes less time to just reboot. Really really anoyying. I also have the issue of the CAS raising after resume from S3 Should be 6.6.6.15 manual set, not XMP. please see attached image. Not cool, mean i have no choice but to shut down and or reboot. Please fix! thanks!
post edited by Exsomos - 2010/03/14 12:46:51
Attached Image(s)
*MAIN RIG* i7-920 D0 4.01ghz 1.24v 191x21 HT-ON - Megahalem RevB push/pull max 70c - EVGA e760 Classified - BFG 295GTX OCFUBE 684/1476/2214 EVGA 460GTX 756mb for Physx - 12gb 2000 Corsair Dominator GT @1913 8-8-8-24-54-1t - Corsair HX1000w CMPSU - 6 x WD 640aals Raid 0 - BluRay and DVD-RW - Antec 1200 w/ some nifty case badges - Dual HP 2711x 27" LED LCDs Windows 7 Ultimate x64 *MEDIA CENTER* i7 920 C0 3.423ghz 163x21 HT-ON - CoolerMaster V8 - EVGA e767 TriSLI - EVGA 250GTS 768MB - 6GB Corsair 1600mhz 7-8-7-20-41-1t - 3 x WD 1TB Raid 0 BluRay and DVD-RW - CoolerMaster Elite - Windows 7 Ultimate x64 - 61" Samsung DLP - Onkyo 7.1 Surround 1000Watt Klipsch Synergy Sub 12
|
azamat
ACX Member
- Total Posts : 360
- Reward points : 0
- Joined: 2009/03/11 18:21:39
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 13:07:23
(permalink)
seems like gulftown tweaks are screwing up memory settings for bloomfields... two separate bioses, anyone?
Sig is under construction
|
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 13:11:46
(permalink)
 this is where i am stuck!!!
|
Alex2190
SSC Member
- Total Posts : 504
- Reward points : 0
- Joined: 2009/05/19 23:21:39
- Location: Maryland, USA
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 13:16:21
(permalink)
try a reburn + verify the burn. also make sure bios are reset.
EVGA X58 SLI (758) Rev 1.1 EVGA GTX 480 SC+ Intel Core i7 920 C0 3.8GHz ~ 1.33v Intel X25-M 80GB G2 WD 500GB 12 GB RAM 1600MHz Corsair HX750W Antec 300 Case
|
rdpbass
Superclocked Member
- Total Posts : 130
- Reward points : 0
- Joined: 2007/03/31 08:36:42
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 14:11:25
(permalink)
OK got it to work with VM Ware. Doesn't work with windows virtual machine.
|
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 15:01:11
(permalink)
Thanks for your help but i have exhausted everything
Tried different media
CD to DVD
Different Brand
Tried USB Flash Drive
Tried burnging the ISO through my Macbook Pro
What are the chances now?
Starting an RMA
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 15:30:10
(permalink)
Before you attempt to flash do you clear the cmos then boot using defaults?
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 15:34:05
(permalink)
tried it,
however i asked a friend of mine to download and burn a copy to test
works
i am going there now to pick it up and test it
if not
RMA is submitted, will follow up on that then.
|
zoltanthegypsy
SSC Member
- Total Posts : 794
- Reward points : 0
- Joined: 2009/05/22 07:06:27
- Location: Bainbrige Island, WA, USA
- Status: offline
- Ribbons : 3
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 16:22:40
(permalink)
Hopefully your friend's burn will work for you. I've had a couple of ISO downloads lately that DLD'd and burned fine without errors, but only sort of worked. Turned out to be bad downloads. Correct byte counts but corrupted data.
It would sure be helpful if EVGA would post checksums for their downloads. Particularly when flashing a BIOS one doesn't want to launch a broken executable.
Just my $0.02,
Z.
|
shamino
EVGA Overclocking Evangelist
- Total Posts : 1627
- Reward points : 0
- Joined: 2008/09/03 19:19:39
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 17:32:14
(permalink)
Turbo performance not = Turbo mode
|
shamino
EVGA Overclocking Evangelist
- Total Posts : 1627
- Reward points : 0
- Joined: 2008/09/03 19:19:39
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 17:33:42
(permalink)
ShockTheMonky
Well, I also have another bug to report. Seems if you have Turbo Performance Disabled and you have CxE set to either Auto or Cx whatever, Turbo Performance still kicks in. Real pita. I can't run any Cx settings unless I turn up my vcore and vtt which I don't want the heat.
If you enable CXE the higher multi would kick in with single thread app WHAT is strange or new?
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 17:45:22
(permalink)
shamino
ShockTheMonky
Well, I also have another bug to report. Seems if you have Turbo Performance Disabled and you have CxE set to either Auto or Cx whatever, Turbo Performance still kicks in. Real pita. I can't run any Cx settings unless I turn up my vcore and vtt which I don't want the heat.
If you enable CXE the higher multi would kick in with single thread app WHAT is strange or new?
Because it still kicks with turbo performance disabled. With 1j if cxe is enabled then cpu kicks to 21x like it should. With 44 and 49 with or without turbo performance enabled, cpu kicks to 22x when cxe is enabled.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
shamino
EVGA Overclocking Evangelist
- Total Posts : 1627
- Reward points : 0
- Joined: 2008/09/03 19:19:39
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 17:51:13
(permalink)
thats the way it is, intel's turbo mode feature, plkaying with c states and all, they advertise and do propoganda on this feature.
|
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 18:02:11
(permalink)
fabbasi
this is where i am stuck!!!
Just got back tried it FAIL!!!!!!!!!!!! Called evga Tech, advised to see if BIOS 44 would boot and load =FAIL!!!!! THis is an X58 SLi Classified Hydro Copper, submitted for RMA. I better get this model# back in return.
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 18:07:49
(permalink)
You're missing what I'm saying. With 1j I ran W3520 at 20x w/Turbo Mode giving me 21x. With C6 enabled multi would drop 16x when idle and back to 20x w/turbo 21x. NP. BCLK at 201 gave me 4210 w/turbo mode.
With 44 and 49 with turbo performance turbo mode kicks to 22x whick makes 4400+ when cxe is enabled. This where problem arises. If I disable turbo performance but leave cxe enabled when placed under load multi will jump temporaly to 22x then drop to 21x then as load is dropped multi jumps back up to 22x and stays causing temporary lock or crash because of vcore and or vtt being to low. Increasing voltages can stabilize but also increase heat during load.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
shamino
EVGA Overclocking Evangelist
- Total Posts : 1627
- Reward points : 0
- Joined: 2008/09/03 19:19:39
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 18:11:46
(permalink)
the updated intel microcode implements the CXE + single thread turbo multi upping better (works more consistently). How do you choose in this case.
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:EVGA X58 Motherboards - BIOS 49 Released
2010/03/14 18:28:24
(permalink)
As it stands right now with 44 or 49 I have to disable cxe because system is setup for folding. Load level is not consistant on every core. Using affinity to run multi iterations is where problem kicks. When running at consistant load multi stays at 21x but if load drops on any core then cxe will kick in which kicks core upto 22x instead of dropping multi like cxe should do. This is when turbo performace is disabled and turbo mode enabled.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
