There seems to be a lot of interest from us ASUS board users for the wider spacing,so make it happen EVGA!

So the 2/3 SLI would work with three titan hydro coppers in slots 1,3,5 yes?
It didn't specifically state dual slot cards and I hate to take one and have someone else not get one because they sold out.
Having this bridge would really tie the room together, man.

Which bridge should I get if I'm doing dual SLI with a 3 slot width card like the Inno3d iChill series? Thanks

Man I don't even have SLI right now and yet I still bought a 2/3 way bridge.  Thanks a lot EVGA; making something really cool that I have to buy, even though I can't use it yet.

Reply to message
Re:EVGA Pro SLI Bridges + Giveaway! 29 mins. ago (permalink)
Merloobi


Which bridge should I get if I'm doing dual SLI with a 3 slot width card like the Inno3d iChill series? Thanks

None of the EVGA Pro Sli Bridges support SLI with 3 slot cards side-by-side.

Unless EVGA makes a bridge for people who want to have cards is slot 1 and 4
That would give people with 2 slot cards, 1 slot of space and give people with 3 slot cards a bridge that would do side-by-side.
If you want a Bridge with 1 slot of space between two 3 slot cards then you would want the 3 way bridge.

The 2way bridge is for cards in slot 1-3 or 2-4
The 3way bridge is for cards in slot 1-3-5 or 2-4-6 or 1-5 or 2-6

<message edited by S2000Gan on 22 mins. ago>
My Rig: CPU i5-2500K Motherboard Asus Maximus IV Gene-Z Memory 8GB (2x4GB) Corsair Vengeance DDR3
Graphics Card EVGA 560 TI DS Solid State Drive Corsair Force GS 240GB Hard Drive WD Green 640GB
Power Supply Corsair HX650 Case Lancool K63 CPU Cooler EVGA Superclock
My Affiliate Code: ZZQSAN5DAP Waiting for the Titan Cooled GTX 770 to stock: 02G-P4-3770/3771-KR





Thanks for a true clarification of how the SLI cards lay out.
I was still confusing to me with the 2/3 dual or non dual slot.
Appreciated!
Can't wait to see what it looks like powered up!

ManBearPig

Man I don't even have SLI right now and yet I still bought a 2/3 way bridge.  Thanks a lot EVGA; making something really cool that I have to buy, even though I can't use it yet.

 
I'm in the same boat, I ordered the 2/3 bridge anyway, and will plug it in when it comes. I'll add the SLI 770 when they restock the 3771.

Just ordered a 4-Way bridge! 
 
Need a 2-Way as well .. once it's in stock.

How about EU availability? :)

EVGA_JacobF 

S2000Gan 
Would be nice if they made a 2 way bridge that it double width and works for 2 cards with 1 slot in-between. 

 

Seeing this request a lot, will look into it. 

 
 
+1

More people using 1+4 than 1+3 so there is demand for these bridges...
And double width will be nice too! :]

I really need one that is for dual cards with one slot in between. i think the spacing is 60mm. I found that may X79 boards have this setup probably for better cooling with 2 cards.

Man... bummer about no support for what I consider standard two card spacing (one slot of space in between two dual slot cards, i.e. slots 1 and 4 or 2 and 5).
 
This bridge would look awesome with my pair of ACX 780s... EVGA can we pretty please have a 2 slot bridge for slot 1+4 spacing instead of 1+3/1+5? If yes, shut up and take my money!!!

In the EVGA 780i I have the 1st and 3rd green slots used for SLI, will the 2 way work? I am running running 2 560SCs.
 

Crap that counts me out.

It is not recommended to use a bridge without all of the connections filled and we would not be able to guarantee if it will work with only cards at the two ends of the bridge.

Double checked with Product Management and the 3-way will work for 2-way.  In general Nvidia does not recommend it however this one we do recommended.