Hot!EVGA Pro SLI Bridges!

Page: << < ..1617181920.. > >> Showing page 17 of 31
Author
Post
Essentials Only Full Version
dxtremefx
New Member
  • Total Posts : 27
  • Reward points : 0
  • Joined: 2007/10/27 08:46:41
  • Location: Glendale, AZ
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/20 19:23:31 (permalink)
S2000Gan
dxtremefx
I finally received mine.



The V8GTS doesnt block RAM slots?
At least for heat spreaders as tall as the Ballistix tactical tracers? 
I can see that it hangs over 2 slots but as far as I can tell the heat spreaders fit under it.


I ditched the V8 GTX, for a CORSAIR Hydro Series H100i Water Cooler.

  
My Rig:
*Intel Core i7-4770K Haswell 4.4GHz LGA 1150
*ASRock Z87 Extreme9/ac LGA 1150 Intel Z87 Motherboard
*AVEXIR Core Series 32GB Kit (4 x 8GB) Quad Channel 240-pin DDR3 SDRAM DDR3 2400 (PC3 19200)
*2x'sEVGA ACX Cooler 03G-P4-2784-KR GeForce GTX 780 3GB 384-bit GDDR5 PCI Express 3.0
*CORSAIR Hydro Series H100i Water Cooler
*2x'sCorsair Neutron Series GTX CSSD-N480GBGTXB-BK 2.5" 480GB SATA III MLC Internal Solid State Drive in Raid 0
*Corsair AX1200i PSU
*Corsair Obsidian 900D Super Tower
 
#481
S2000Gan
FTW Member
  • Total Posts : 1446
  • Reward points : 0
  • Joined: 2010/09/05 23:24:31
  • Location: Bellevue, WA
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/20 21:05:22 (permalink)
dxtremefx
I ditched the V8 GTX, for a CORSAIR Hydro Series H100i Water Cooler.

Any particular reason?

My Rig: CPU i5-2500k   Motherboard Asus Maximus IV Gene-Z   RAM 16GB Crucial Tracer
Graphics Card EVGA GTX 770 TITAN Cooler Edition   Solid State Drive Corsair Force GS 240GB
Hard Drive WD Green 640GB   Power Supply Corsair HX650   Case Lian Li Lancool K63
My Affiliate Code: ZZQSAN5DAP
#482
dxtremefx
New Member
  • Total Posts : 27
  • Reward points : 0
  • Joined: 2007/10/27 08:46:41
  • Location: Glendale, AZ
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/20 23:21:14 (permalink)
It just wasn't cooling enough at 4.5GHz. I might just switch to a complete custom dual loop system. 

  
My Rig:
*Intel Core i7-4770K Haswell 4.4GHz LGA 1150
*ASRock Z87 Extreme9/ac LGA 1150 Intel Z87 Motherboard
*AVEXIR Core Series 32GB Kit (4 x 8GB) Quad Channel 240-pin DDR3 SDRAM DDR3 2400 (PC3 19200)
*2x'sEVGA ACX Cooler 03G-P4-2784-KR GeForce GTX 780 3GB 384-bit GDDR5 PCI Express 3.0
*CORSAIR Hydro Series H100i Water Cooler
*2x'sCorsair Neutron Series GTX CSSD-N480GBGTXB-BK 2.5" 480GB SATA III MLC Internal Solid State Drive in Raid 0
*Corsair AX1200i PSU
*Corsair Obsidian 900D Super Tower
 
#483
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 08:26:16 (permalink)
whitie63
Dave Ord
whitie63
Ok got mine to light up with my 760's 

 



Well good man you how did you manage it?

 
 
LOL with a little modding if you look real close now there is a sleeved wire  coming out of it that i hooked up to a small strip led like this one with sticky on the back 
 

just grabbed a molex connector ran some sleeved wire to it and  Vooooila and it is something I can remove with out damage to the bridge  
 


Did you use the whole LED strip or did you have to cut it ?  Man I love your idea, I want to try it ASAP... I just bought a second GTX 760.  So I would need the same EVGA (SLI) connector that you purchased ? 


#484
whitie63
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2009/10/23 06:56:06
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 09:00:07 (permalink)
I only used enough to go across the bridge which is 3 LED's you have to cut it close
#485
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 09:47:08 (permalink)
whitie63
I only used enough to go across the bridge which is 3 LED's you have to cut it close



Cool, so the other end of the LED strip has some kind of connector, to plug in the molex connection ?


#486
whitie63
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2009/10/23 06:56:06
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 10:05:49 (permalink)
R3YOWN$_ROG
whitie63
I only used enough to go across the bridge which is 3 LED's you have to cut it close


Cool, so the other end of the LED strip has some kind of connector, to plug in the molex connection ?


I have to take it out tonight to reinstall my third card when I do I will take it apart and post some pictures maybe that will make it easier to understand
#487
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 10:19:23 (permalink)
WOW, do you really need 3 cards, LOL... Cool bro, I really appreciate if you post the pictures and maybe let me know where I can buy the LED strips at in RED!
 
I am sending back one of my 760 GTX cards because it sounds like its going to explode.  The weird thing is I bought 2 of the same cards but maybe a month apart. One of them looks slightly different.  It is the same part # but for whatever reason one has a plastic cover that covers up the heatsinks on the side... If you look at the side of your video cards in your picture can see your heat sinks. One of my cards looks exactly like that, and the other has a plastic shell covering it.  


#488
whitie63
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2009/10/23 06:56:06
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 10:28:56 (permalink)
lol no I don't need three cards but lol that's part of the game on this site make it as insane as possible and I like doing it because I can
#489
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 10:36:04 (permalink)

I currently have the Asus Crosshair formula Z motherboard.  I have the GTX 760 in the first slot and I am waiting on my second GTX 760 to put in the slot beneath it.  In this case , do I need the 2 way SLI or the 2/3 way SLI Bride ? Your help is greatly appreciated, Thanks !


#490
pathfindercod
ACX Member
  • Total Posts : 348
  • Reward points : 0
  • Joined: 2006/05/28 01:50:34
  • Status: offline
  • Ribbons : 2
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 12:15:37 (permalink)
2-way
 
R3YOWN$_ROG

I currently have the Asus Crosshair formula Z motherboard.  I have the GTX 760 in the first slot and I am waiting on my second GTX 760 to put in the slot beneath it.  In this case , do I need the 2 way SLI or the 2/3 way SLI Bride ? Your help is greatly appreciated, Thanks !





 
DT:CaseLabs Mercury s8, Intel 4960X, 3 x EVGA K|NGP|N GTX780TI gpu's, 32gb Corsair Dominator GT, Asus Rampage IV Black Edition, full on EKWB water cooling, 2 x 512gb 840 Pro Raid 0, 2 x 3tb Seagate spindles, Corsair AX1500i PSU
NB: AW m18x r2 3940x, 780m sli, 32gb HyperX, 2 x 480gb Intel 730 Raid 0 (Red)
NB: AW m18x r2 3920x, 780m sli, 16gb Ripjaw, 2 x 240gb Intel 730 Raid 0
NB: AW m15x 920xm, 980m, 16gb G.Skill, 512gb Criucial mx100
NB: AW m11x r3 2637m, 540m 2gb, 8gb ram, 256gb Toshiba Pro SSD
17" MBP, 13" MBA, !984 Mac Classic (works), Amiga 500, Amiga 2000HD
 
#491
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 12:18:49 (permalink)
pathfindercod
2-way
 
R3YOWN$_ROG
 
I currently have the Asus Crosshair formula Z motherboard.  I have the GTX 760 in the first slot and I am waiting on my second GTX 760 to put in the slot beneath it.  In this case , do I need the 2 way SLI or the 2/3 way SLI Bride ? Your help is greatly appreciated, Thanks !








So if I wanted to use the 2/3 Way Bridge I would have to put it in the 3rd slot , correct ?  I like the 2/3 Way bridge because its bigger and I want to do the LED mod to make it glow !


#492
pathfindercod
ACX Member
  • Total Posts : 348
  • Reward points : 0
  • Joined: 2006/05/28 01:50:34
  • Status: offline
  • Ribbons : 2
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 12:40:09 (permalink)
Not sure the 3 way would work if you put it in the third slot. You'd have to measure. 

 
DT:CaseLabs Mercury s8, Intel 4960X, 3 x EVGA K|NGP|N GTX780TI gpu's, 32gb Corsair Dominator GT, Asus Rampage IV Black Edition, full on EKWB water cooling, 2 x 512gb 840 Pro Raid 0, 2 x 3tb Seagate spindles, Corsair AX1500i PSU
NB: AW m18x r2 3940x, 780m sli, 32gb HyperX, 2 x 480gb Intel 730 Raid 0 (Red)
NB: AW m18x r2 3920x, 780m sli, 16gb Ripjaw, 2 x 240gb Intel 730 Raid 0
NB: AW m15x 920xm, 980m, 16gb G.Skill, 512gb Criucial mx100
NB: AW m11x r3 2637m, 540m 2gb, 8gb ram, 256gb Toshiba Pro SSD
17" MBP, 13" MBA, !984 Mac Classic (works), Amiga 500, Amiga 2000HD
 
#493
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 12:45:46 (permalink)
pathfindercod
Not sure the 3 way would work if you put it in the third slot. You'd have to measure. 




Ok thanks for the reply !


#494
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 15174
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: online
  • Ribbons : 22
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 13:31:39 (permalink)
2-way is back in stock for those looking for it http://www.evga.com/Produ...aspx?pn=100-2W-0021-LR


   jfreeZr - [rebuilding]  4770k @ 5.2ghz || evga z87 classified || 2x evga gtx 980 acx2 || 16gb 2.6ghz ddr3 || 500gb 840 evo raid0 || evga supernova 1000 P2
   hadronGTX - 4770k @ 4.4ghz || evga z9 stinger || evga gtx780 ti acx || 16GB 2.6ghz ddr3 || 480gb vertex3 raid0 || 500w gold
#495
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 14:25:17 (permalink)
Cool, I just ordered the 2/3 way SLI Bridge. If it does not fit, can I return it for the regular 2 way ?


#496
Trelor
ACX Member
  • Total Posts : 485
  • Reward points : 0
  • Joined: 2007/04/06 10:38:50
  • Location: Northern, NJ
  • Status: offline
  • Ribbons : 7
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 14:59:07 (permalink)
@Jacob, any news of a double wide 2way bridge?



Heatware: Trelor - I primarily use eBay which is attached to my heatware.
#497
CoronaBuzz
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2012/10/01 18:49:15
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 16:36:33 (permalink)
Hey guys, just need to know which bridge fits the Asus Sabertooth z77 1155 motherboard.  Heres my rig..
 

 
 
post edited by CoronaBuzz - 2013/10/21 16:41:34
#498
whitie63
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2009/10/23 06:56:06
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 16:59:54 (permalink)
I TAKE NO RESPONSIBILITY FOR YOUR OUTCOME FROM FOLLOWING USE AT YOUR OWN RISK.
 
R3YOWN$_ROG
WOW, do you really need 3 cards, LOL... Cool bro, I really appreciate if you post the pictures and maybe let me know where I can buy the LED strips at in RED!
 



Okay as promised the info 
the led's and yes you can get them in red and they are 12v can be found at Hobbypartz 
so all I did was take the screws out of the back and stuck my Led's to the bridge removed the resistor and added a 4th led simple math 4 led's at 3v each = 12v 

 

 
Replaced the face on the bridge ran 12v from the psu and there you have it
 

 
and the 3way bridge has spacing of this
 

 
or
 

 
hope this helps 
 
 
post edited by whitie63 - 2013/10/22 04:31:55
#499
S2000Gan
FTW Member
  • Total Posts : 1446
  • Reward points : 0
  • Joined: 2010/09/05 23:24:31
  • Location: Bellevue, WA
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/21 19:28:16 (permalink)
dxtremefx
It just wasn't cooling enough at 4.5GHz. I might just switch to a complete custom dual loop system. 

Really? my EVGA Superclock cooler does 5GHz without any difficulty.
And if I recally the EVGA Superclock is slighty better than the V6 GT which the V8 GTS is also slighty better than.


whitie63
 so all I did was take the screws out of the back and stuck my Led's to the bridge removed the resistor and added a 4th led simple math 4 led's at 3v each = 12v 

are they in series or parallel?
post edited by S2000Gan - 2013/10/21 19:31:01

My Rig: CPU i5-2500k   Motherboard Asus Maximus IV Gene-Z   RAM 16GB Crucial Tracer
Graphics Card EVGA GTX 770 TITAN Cooler Edition   Solid State Drive Corsair Force GS 240GB
Hard Drive WD Green 640GB   Power Supply Corsair HX650   Case Lian Li Lancool K63
My Affiliate Code: ZZQSAN5DAP
#500
Trelor
ACX Member
  • Total Posts : 485
  • Reward points : 0
  • Joined: 2007/04/06 10:38:50
  • Location: Northern, NJ
  • Status: offline
  • Ribbons : 7
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/22 03:33:52 (permalink)
CoronaBuzz
Hey guys, just need to know which bridge fits the Asus Sabertooth z77 1155 motherboard.  Heres my rig..
 

 
 


 I would say the double, but measure the distance between the fingers.



Heatware: Trelor - I primarily use eBay which is attached to my heatware.
#501
whitie63
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2009/10/23 06:56:06
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/22 04:33:17 (permalink)
 
whitie63
 so all I did was take the screws out of the back and stuck my Led's to the bridge removed the resistor and added a 4th led simple math 4 led's at 3v each = 12v 

are they in series or parallel?




"series"
#502
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/22 06:29:31 (permalink)
whitie63
I TAKE NO RESPONSIBILITY FOR YOUR OUTCOME FROM FOLLOWING USE AT YOUR OWN RISK.
 
R3YOWN$_ROG
WOW, do you really need 3 cards, LOL... Cool bro, I really appreciate if you post the pictures and maybe let me know where I can buy the LED strips at in RED!
 



Okay as promised the info 
the led's and yes you can get them in red and they are 12v can be found at Hobbypartz 
so all I did was take the screws out of the back and stuck my Led's to the bridge removed the resistor and added a 4th led simple math 4 led's at 3v each = 12v 

 

 
Replaced the face on the bridge ran 12v from the psu and there you have it
 

 
and the 3way bridge has spacing of this
 

 
or
 

 
hope this helps 
 
 




Thanks for sharing, this is a great DIY mod. Oh , and your computer is a Beast Master , lol 


#503
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/22 06:30:48 (permalink)
Trelor
CoronaBuzz
Hey guys, just need to know which bridge fits the Asus Sabertooth z77 1155 motherboard.  Heres my rig..
 

 
 


I would say the double, but measure the distance between the fingers.




What a great Rig.  I just noticed the hand grenade, awesome !


#504
CoronaBuzz
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2012/10/01 18:49:15
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/22 11:41:23 (permalink)
Thanks Trelor, I will measure as soon as I get off work.
 
Thanks R3YOWN ROG , just showin a lil love for the battlefield series...So stoked about the Bf4 release.
#505
JJ1042
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2013/07/26 18:55:57
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/22 11:53:48 (permalink)
Just got mine from UPS today!
 

#506
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/22 13:21:09 (permalink)
CoronaBuzz
Thanks Trelor, I will measure as soon as I get off work.
 
Thanks R3YOWN ROG , just showin a lil love for the battlefield series...So stoked about the Bf4 release.




Trelor, you should add me to BF4,  MastahKillah82 for PC and PS3.  But I will mainly be on PC since I built a new rig... 


#507
phatDUB
New Member
  • Total Posts : 99
  • Reward points : 0
  • Joined: 2011/10/14 09:03:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/22 15:40:09 (permalink)
mine is stuck with UPS :(

MEISTER PH: Intel I7 3930K @ 4.4Ghz/ASUS Rampage IV Extreme/32GB Corsair Platinum 1866Mhz "9-10-9-27-2 "1.5V/Corsair Neutron GTX 480GB/EVGA GTX 680 Classified TRI SLI/ Corsair AX1200/XSPC Raystorm Chrome/Dual XSPC AX360/Bistpower Fitings/Bitspower 250ml Reservoir/Swiftech MCP655 Pump/Corsair 600T White Custom

In-progress changes: Intel I7 3930K @ 4.4Ghz/ASUS Rampage IV Extreme/32GB Corsair Platinum 1866Mhz "9-10-9-27-2 "1.5V/Corsair Neutron GTX 480GB/Waiting for EVGA GTX 780 ti Classified TRI SLI / EVGA Tri SLI Pro Brigde/Corsair AX1200/XSPC Raystorm Chrome/Dual XSPC AX480/XSPC Asus R4E Motherboard Block/Bistpower Fitings/Dual Bitspower 250ml Reservoir/Swiftech MCP655 Dual Pump/Aquaero 5 XT with accessories/Corsair 900D
 
Sennheiser PC363D 7.1 Surround
Duckyshine 2
G700
Xbox PC controller

DELL U2711 Nvidia Surround[/size
#508
krashrider
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2013/08/22 23:19:33
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/25 08:29:24 (permalink)
I just installed the SLI bridge on two GTX 770 Classified's with a one slot gap using the 3 way bridge. The lighting does not work though. How do I get the lighting to work? Thanks
#509
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/25 08:32:20 (permalink)
krashrider
I just installed the SLI bridge on two GTX 770 Classified's with a one slot gap using the 3 way bridge. The lighting does not work though. How do I get the lighting to work? Thanks




From my understanding they are only available on select 770's, but someone posted a mod to make your own LED light up... If you look back in this thread you can find it... But click the link for the EVGA bridge and they tell you the specific models that work


#510
Page: << < ..1617181920.. > >> Showing page 17 of 31
Jump to:
  • Back to Mobile