jsarver101
Superclocked Member
- Total Posts : 184
- Reward points : 0
- Joined: 2013/02/25 18:10:00
- Status: offline
- Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/22 10:17:44
(permalink)
thanks guys. will have a couple more photos up later today
Fractal Design R5 - Asus Rampage V - 5930K 4.4 @ 1.27v - 16 GB Dominator Platinum 2666mhz - GTX 980 Ti x2 Sli - Creative Sound Blaster Z - Corsair 1200i - Asus Raidr Express SSD - Samsung 840 Pro 512 SSD - Samsung 850 Pro 1Tb SSD - Samsung 840 Evo 1Tb SSD- Corsair H110i GT - ROG Swift @ 1440p w/ Gsync - Sen. Game One w/ Astro Mixamp 2013- Razer Blackwidow Chroma - Razer Naga - Razer Sabertooth - Razer Deathadder Chroma
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/22 16:27:54
(permalink)
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/22 21:36:10
(permalink)
EVGA_JacobF
bcavnaugh
For the X79 Dark and two Titan Hydo's which bridge should I get the 2 Way or the 2/3 way bridge? Thanks Bill
I would go the 2/3 Way!
FYI The EVGA Pro SLI Bridge at least the 2/3 Way Bridge will not work on the X79 Dark MB with Two EVGA GeForce GTX TITAN Hydro Copper Signature in the two 16x Slots number 1 and 3. What a real Bummer, wonder if I can get a refund? Bill
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/23 01:05:38
(permalink)
It should work, what is the exact issue?
 jfreeZr - [rebuilding] 4770k @ 5.2ghz || evga z87 classified || 2x evga gtx 980 acx2 || 16gb 2.6ghz ddr3 || 500gb 840 evo raid0 || evga supernova 1000 P2 hadronGTX - 4770k @ 4.4ghz || evga z9 stinger || evga gtx780 ti acx || 16GB 2.6ghz ddr3 || 480gb vertex3 raid0 || 500w gold
|
presy
Superclocked Member
- Total Posts : 246
- Reward points : 0
- Joined: 2006/02/23 10:38:02
- Status: offline
- Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/23 06:23:17
(permalink)
Jacob, when should we expect to see more 3-way/2-way bridges in stock? Any other vendors to purchase from? Performance PC's apparently had some and ran out of stock already. Thanks!
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/23 09:29:27
(permalink)
EVGA_JacobF
It should work, what is the exact issue?
I have my cards in Slot 1 (next to the CPU) and the 2nd card in 3rd Slot the bridge is about 2 CM sort. The space between each SLI Port is about 6 CM. Thanks for looking, Bill 
post edited by bcavnaugh - 2013/08/29 18:39:13
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/27 06:38:13
(permalink)
presy
Jacob, when should we expect to see more 3-way/2-way bridges in stock? Any other vendors to purchase from? Performance PC's apparently had some and ran out of stock already. Thanks!
Mid Sept. Big shipment this time.
jfreeZr - [rebuilding] 4770k @ 5.2ghz || evga z87 classified || 2x evga gtx 980 acx2 || 16gb 2.6ghz ddr3 || 500gb 840 evo raid0 || evga supernova 1000 P2 hadronGTX - 4770k @ 4.4ghz || evga z9 stinger || evga gtx780 ti acx || 16GB 2.6ghz ddr3 || 480gb vertex3 raid0 || 500w gold
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/27 06:39:22
(permalink)
bcavnaugh
EVGA_JacobF
It should work, what is the exact issue?
I have my cards in Slot 1 (next to the CPU) and the 2nd card in 3rd Slot the bridge is about 2 CM sort.
The space between each SLI Port is about 6 CM. Thanks for looking, Bill
 
Images don't seem to work... Strange, I don't see why it doesnt work. From connector to connector it should be 60mm. That should be enough for the 2-way bridge.
jfreeZr - [rebuilding] 4770k @ 5.2ghz || evga z87 classified || 2x evga gtx 980 acx2 || 16gb 2.6ghz ddr3 || 500gb 840 evo raid0 || evga supernova 1000 P2 hadronGTX - 4770k @ 4.4ghz || evga z9 stinger || evga gtx780 ti acx || 16GB 2.6ghz ddr3 || 480gb vertex3 raid0 || 500w gold
|
Viper97
CLASSIFIED Member
- Total Posts : 4966
- Reward points : 0
- Joined: 2007/09/07 13:06:18
- Location: Hanging a Left at the next Right
- Status: offline
- Ribbons : 10
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/27 06:43:21
(permalink)
bcavnaugh
EVGA_JacobF
bcavnaugh
For the X79 Dark and two Titan Hydo's which bridge should I get the 2 Way or the 2/3 way bridge? Thanks Bill
I would go the 2/3 Way!
FYI
The EVGA Pro SLI Bridge at least the 2/3 Way Bridge will not work on the X79 Dark MB with Two EVGA GeForce GTX TITAN Hydro Copper Signature in the two 16x Slots number 1 and 3.
What a real Bummer, wonder if I can get a refund? Bill
While I don't have Titans I have 2-670's in the same slots you identified. I find no problem with the SLI bridge. Is it that the bridge doesn't fit or just isn't functioning with the Titans?
|
wlee1124
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2013/01/05 16:11:46
- Status: offline
- Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/27 12:50:06
(permalink)
Sorry for the stupid question, I have the Asus ROG Maximus VI Hero, Current I am running two way SLI with 760s, I want to get the EVGA pro sli brigde, but I don't if I should get the three way or two way SLI, Some input would be great!
post edited by wlee1124 - 2013/08/27 17:19:15
Attachment(s)Attachments are not available: Download requirements not met
Corsair Vengeance C70 ASUS Maximus VI Hero i5 4670k @ 4.4 Corsair H110 cooling Corsair Vengeance Pro 8gb Red OCZ Vertex 450 128gb x 2 Raid 0 Asus GTX 760 x 2 Two way SLI Corsair AX860i
|
CAxVIPER
CLASSIFIED Member
- Total Posts : 2912
- Reward points : 0
- Joined: 2011/08/24 08:13:16
- Location: South FL
- Status: offline
- Ribbons : 5
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/28 08:05:12
(permalink)
wlee1124
Sorry for the stupid question, I have the Asus ROG Maximus VI Hero,
Current I am running two way SLI with 760s,
I want to get the EVGA pro sli brigde, but I don't if I should get the three way or two way SLI,
Some input would be great!
You need to measure the distance between the fingers. If it is 60mm you need the 2 way, 40 or 80 and you can get the 3 way. BTW your rear fan should be exhausting
|
wlee1124
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2013/01/05 16:11:46
- Status: offline
- Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/28 12:02:25
(permalink)
nevermind, they just updated the page, I guess the LED doesn't support the 760, It used to say the LED supports 700s series cards. CAxVIPER
wlee1124
Sorry for the stupid question, I have the Asus ROG Maximus VI Hero,
Current I am running two way SLI with 760s,
I want to get the EVGA pro sli brigde, but I don't if I should get the three way or two way SLI,
Some input would be great!
You need to measure the distance between the fingers. If it is 60mm you need the 2 way, 40 or 80 and you can get the 3 way. BTW your rear fan should be exhausting
Corsair Vengeance C70 ASUS Maximus VI Hero i5 4670k @ 4.4 Corsair H110 cooling Corsair Vengeance Pro 8gb Red OCZ Vertex 450 128gb x 2 Raid 0 Asus GTX 760 x 2 Two way SLI Corsair AX860i
|
CAxVIPER
CLASSIFIED Member
- Total Posts : 2912
- Reward points : 0
- Joined: 2011/08/24 08:13:16
- Location: South FL
- Status: offline
- Ribbons : 5
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/28 12:08:40
(permalink)
 I bought my 760s because it said 700 series :| I guess it is either time to ask for a refund or mod it to run off AA batteries.
|
exilelrrp
ACX Member
- Total Posts : 259
- Reward points : 0
- Joined: 2007/02/19 11:00:23
- Location: BX INF
- Status: offline
- Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/28 20:31:45
(permalink)
Are you serious!? Oh hellz No! 
Corsair 760T Black / Windowed * i7-4930K * Corsair AX1200W * Asus Rampage IV Black Edition * Corsair Dominator Platinum 64GB (8x8) DDR3/1600MHz * EVGA GeForce GTX 980 Ti 6GB FTW ACX 2.0 w / Backplate (2x) * Plextor 8X Blu Ray SATA w/Lightscribe (P67-2024) * Corsair H100i / Corsair Air Series SP 120mm (x4) * R6 FC * Samsung 840 Evo Series 1TB SSD * Sharp Quattron 46' LCD * Razer Blackwidow Ultimate * Logitech G500 * Cyber Sniper Tracer * SteelSeries 9H USB. 
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/29 18:48:37
(permalink)
EVGA_JacobF
bcavnaugh
EVGA_JacobF
It should work, what is the exact issue?
I have my cards in Slot 1 (next to the CPU) and the 2nd card in 3rd Slot the bridge is about 2 CM sort.
The space between each SLI Port is about 6 CM. Thanks for looking, Bill
Images don't seem to work...
Strange, I don't see why it doesnt work. From connector to connector it should be 60mm. That should be enough for the 2-way bridge.
I went with the 2/3 not the 2 way. see http://forums.evga.com/fb.ashx?m=1999944 Sorry if I messed up Jacob
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/30 04:20:34
(permalink)
Viper97
bcavnaugh
EVGA_JacobF
bcavnaugh
For the X79 Dark and two Titan Hydo's which bridge should I get the 2 Way or the 2/3 way bridge? Thanks Bill
I would go the 2/3 Way!
FYI
The EVGA Pro SLI Bridge at least the 2/3 Way Bridge will not work on the X79 Dark MB with Two EVGA GeForce GTX TITAN Hydro Copper Signature in the two 16x Slots number 1 and 3.
What a real Bummer, wonder if I can get a refund? Bill
While I don't have Titans I have 2-670's in the same slots you identified. I find no problem with the SLI bridge. Is it that the bridge doesn't fit or just isn't functioning with the Titans?
It is a 40mm and for a single 2-Way on the Dark is 60mm so from what I have read the 2 Way would work for my current 2-Way but then they are out of stock and then when I do go 3-Way the 3-Way I have will still not work in my current setup. I will have to change Slots where I have the cards installed. That would also cause be to buy new Water Bridges as well. It is to bad EVGA did not make Water Bridges for their Hydro Copper Water Blocks.
post edited by bcavnaugh - 2013/08/30 04:24:30
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/30 05:56:22
(permalink)
hmm dows the 780 classy work with the dual sli bridge?
The design of the Bridge is very cool :D
[Intel Core i7-4960X@ 4,8Ghz][ASUS Rampage IV Extreme][2x EVGA GTX780 CLASSIFIED SLI][G.Skill TridentX DDR3-2800 16GB][OCZ RevoDrive 3 X2 240Gb][ENERMAX Platimax 1500W][Antec DF-85][Watercooled][ASUS Xonar DX] Greetings from Germany :)
|
weaponmaster011
New Member
- Total Posts : 27
- Reward points : 0
- Joined: 2013/03/07 15:40:02
- Status: offline
- Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/30 12:50:40
(permalink)
Darn I just bought another GTX 660 SC from you guys, it would've been cool if it lighted up on my dual GTX 660 Setup. Im not really for getting brand new, expensive stuff like the 770+ and 670+ since I have a low budget, but these SLI bridges intrigue me! They look very sleek and nice, and no more bending of those old SLI bridges when GPUs are close to each other. nice and clean, Looks awesome.
you should be able to change the SLI bridge color too ;)
CPU: i5 3570K @ 3.4Ghz (STOCK COOLER ATM) GPU: 2x GTX 660 SC SLI PSU: CX750W 64Amps on +12V rail MB: GA Z77X-UD3H HDD: WD Blue 1TB Azza Mid-Tower case with some Antec ultra quiet fans
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/08/30 16:36:11
(permalink)
bcavnaugh
EVGA_JacobF
It should work, what is the exact issue?
I have my cards in Slot 1 (next to the CPU) and the 2nd card in 3rd Slot the bridge is about 2 CM sort.
The space between each SLI Port is about 6 CM. Thanks for looking, Bill
Are your SLI fittings changing the card spacing? Its very possible for that to happen! I would loose the fitting up to get some play, install the bridge and snug the fittings back up and check for leaks.
|
N4770F
New Member
- Total Posts : 62
- Reward points : 0
- Joined: 2008/03/19 19:52:46
- Status: offline
- Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway!
2013/09/02 06:42:42
(permalink)
I got the 2-way 3- way & the four way, but you are out of luck if you are running two GTX 690s on a board that is set up for PCI-E (1) - (3) - (2)
|
dipzy_v
Superclocked Member
- Total Posts : 234
- Reward points : 0
- Joined: 2012/04/05 08:18:05
- Location: United Kingdom
- Status: offline
- Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway!
2013/09/03 14:29:03
(permalink)
any news on when we can see the 2/3way on EU store? only 4 way seems to be available?
 Heatware: dipzy_v Intel 4930K|Gigabyte X79 UP4|16GB Gskill DDR3|EVGA TITAN X SC|512GB 850 Pro SSD|3TB HDD|Corsair AX1500i|Asus PG348Q|Ducky YOTS|Corsair M65|
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/09/03 15:41:40
(permalink)
More around the middle of this month.
jfreeZr - [rebuilding] 4770k @ 5.2ghz || evga z87 classified || 2x evga gtx 980 acx2 || 16gb 2.6ghz ddr3 || 500gb 840 evo raid0 || evga supernova 1000 P2 hadronGTX - 4770k @ 4.4ghz || evga z9 stinger || evga gtx780 ti acx || 16GB 2.6ghz ddr3 || 480gb vertex3 raid0 || 500w gold
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/09/03 17:33:50
(permalink)
For those interested I did a mod on my 3-way SLI bridge, inspired by CAxVIPER to change the colors. No need to use other LED's. Green to match the 780's Attachments are not available: Download requirements not met Attachments are not available: Download requirements not met See his Thread here for details: http://forums.evga.com/tm.aspx?m=2001514
Attachment(s)Attachments are not available: Download requirements not met
X79 System:
Windows 10 Pro 64-bit | Intel Core i7 3930K (4.3 GHz)| ASUS Rampage IV Extreme | 32 GB 2133 G.SKILL Ripjaws Z Series
Corsair 900D | Corsair AX 1200i PSU | Corsair H110 CPU Cooler (in Push/Pull) | EVGA GTX 1080 8 GB in SLI (x2)
Samsung 840 PRO 256 GB | Samsung 850 EVO 500 GB | Intel 520 SATA SSD 240GB HD | 2 TB WD Black Hard Drive
Creative Sound Blaster Z | Logitech THX 5.1 speaker setup | LG Blu-ray burner | Corsair AF 120 and 140 Fans
2 x Samsung SyncMaster PX2370 | Samsung SyncMaster XL2370 | Nvidia 2D Surround Set-up
|
Re:EVGA Pro SLI Bridges + Giveaway!
2013/09/03 19:50:18
(permalink)
Here's a good one.....how about a bridge that is 3 slot spaced (triple sli mobo with gpu's in slots 1 and 3) but NOT 3-way compatible, only 2-way SLI compatible. Any way EVGA can cook one up for me?  2 EVGA GTX 460SSC+'s w/Koolance blocks Asus M3N-HT 780a deluxe 3/SLI
Win XP SP3 32bit , Win 7 Ultimate 64 bit----dual boot OS ASUS M3N-HT 780a tri-sli mobo AMD Phenom 2 X4 955BE C3@4.5ghz w/Koolance block 1X EVGA GTX460 SSC+, 1X EVGA GTX460 SC EE w/ Koolance Blocks, SC has EK backplate Corsair 850TX 8gb Kingston HyperX T1 250gb WD Caviar SE 1tb WD Caviar Black 2X Crucial M4's in raid 0 Samsung Blu-Ray Corsair Obsidian 800D.....modded for dual loops. CPU=240 black ice GT rad, Koolance RP-401X2 reservoir & PMP-400 pump, Koolance cpu-360 GPU's=360 black ice GT stealth rad, 250ml res, PMP 400 pump, Koolance vid-nx460 x2
|
CAxVIPER
CLASSIFIED Member
- Total Posts : 2912
- Reward points : 0
- Joined: 2011/08/24 08:13:16
- Location: South FL
- Status: offline
- Ribbons : 5
Re:EVGA Pro SLI Bridges + Giveaway!
2013/09/03 21:15:01
(permalink)
oqsajec
Here's a good one.....how about a bridge that is 3 slot spaced (triple sli mobo with gpu's in slots 1 and 3) but NOT 3-way compatible, only 2-way SLI compatible. Any way EVGA can cook one up for me?
2 EVGA GTX 460SSC+'s w/Koolance blocks
Asus M3N-HT 780a deluxe 3/SLI
Why does it make a difference? But no it will not happen as the 3 way bridges works with 2 or 3 way
|
GTXJackBauer
FTW Member
- Total Posts : 1778
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: U.S.A
- Status: online
- Ribbons : 10
Re:EVGA Pro SLI Bridges + Giveaway!
2013/09/03 23:27:32
(permalink)
oqsajec
Here's a good one.....how about a bridge that is 3 slot spaced (triple sli mobo with gpu's in slots 1 and 3) but NOT 3-way compatible, only 2-way SLI compatible. Any way EVGA can cook one up for me?
2 EVGA GTX 460SSC+'s w/Koolance blocks
Asus M3N-HT 780a deluxe 3/SLI
And also, hope you know it will still work like a typical SLI connector, just without the lights.
|
jrayboul
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2012/08/08 19:11:14
- Status: offline
- Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway!
2013/09/05 13:58:40
(permalink)
Hi guys just wondering if one of the bridges (possibly the 4 way) will fit two cards with 100mm difference (asus maximus vi formula) as I have had to pick the slots furthest apart so I can fit my sound card in?
|
CAxVIPER
CLASSIFIED Member
- Total Posts : 2912
- Reward points : 0
- Joined: 2011/08/24 08:13:16
- Location: South FL
- Status: offline
- Ribbons : 5
Re:EVGA Pro SLI Bridges + Giveaway!
2013/09/05 15:18:13
(permalink)
jrayboul
Hi guys just wondering if one of the bridges (possibly the 4 way) will fit two cards with 100mm difference (asus maximus vi formula) as I have had to pick the slots furthest apart so I can fit my sound card in?
First off 4 way bridges only work with 4 gpus. Second no they have 40mm spacing. You have to use a flexible for the vi formula
|
iSkunk
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2013/05/09 18:42:11
- Status: offline
- Ribbons : 0
Re:EVGA Pro SLI Bridges!
2013/09/06 10:40:41
(permalink)
|
CAxVIPER
CLASSIFIED Member
- Total Posts : 2912
- Reward points : 0
- Joined: 2011/08/24 08:13:16
- Location: South FL
- Status: offline
- Ribbons : 5
Re:EVGA Pro SLI Bridges!
2013/09/06 11:04:30
(permalink)
Winners will probably be posted in an hour(12pm PST)
|
