Forum has errors with pictures :-(

I cant get it to load on start up on boot I have to manually start it. There is also an issue with the 950 card seems to start stop start stop until you manually start EVGA Precision XOC 6.0.5.
 
I also notice i was getting two new things computer restarts after clicking shut down and a blue screen Driver Power State Failure error.
 
So couple things happened here nvidia new driver 372.70 starts running the card hotter on start up, I notice after the update my temps went up a lot faster.
 
and the above
 
Hopefuly  the thing i found on the web about power settings disable fast start up option stops the  instant reboot thats annoying.
 
I did notice when i first installed the evga 950 by itself no Precision 16  just out of the box it work fine no weird on and off fan thing stop go stop go as soon as I installed the software i was having the stop on and off thing on the fans on the graphic card.
 
Also in this new version why do the settings come up when i hit fan curve if i want to close the settings fan curve also goes away really annoying when i just want to see fan curve.
 
I did notice the temps is easier to maintain with this version which only counter acts nvidia's new driver.
 
I feel if i had not upgraded nvidia's new driver and had this version of  EVGA Precision XOC 6.0.5 other then Precision X16 from steam id be siting awesome.
 
Also your program does not do a clean uninstal of Precision X16  or other versions before installing this one  causing new pc issues if the old one is there and its settings are start at boot which this one cant seem to do lol.
 
Precision X16 wont do a full clean uninstall in add remove programs windows 10 it leaves short cuts etc behind.
 
You might need to make a stand alone  EVGA Precision remover program that wipes all traces of previous one before upgrading to a new one that you can update when ever you make a new  EVGA Precision.
 
My specs 
Summary
Operating System
Windows 10 Home 64-bit
CPU
Intel Core 2 Quad Q8200 @ 2.33GHz 39 °C
Yorkfield 45nm Technology
RAM
8.00GB Dual-Channel DDR2 @ 399MHz (5-5-5-18)
Motherboard
Gateway FMCP7AM (CPU 1) 29 °C
Graphics
E320VA (1920x1080@30Hz)
LD-4055 (1920x1080@60Hz)
2047MB NVIDIA GeForce GTX 950 (EVGA) 36 °C
Storage
931GB Seagate ST310005 28AS SCSI Disk Device (SATA) 36 °C
931GB Seagate ST310005 28AS SCSI Disk Device (SATA) 36 °C
Optical Drives
No optical disk drives detected
Audio
High Definition Audio Device
 
NVIDIA GeForce GTX 950
Manufacturer NVIDIA
Model GeForce GTX 950
Device ID 10DE-1402
Revision A2
Subvendor EVGA (3842)
Current Performance Level Level 3
Current GPU Clock 540 MHz
Current Memory Clock 3305 MHz
Current Shader Clock 3305 MHz
Voltage 0.962 V
Bus Interface PCI Express x16
Temperature 36 °C
Driver version 21.21.13.7270
BIOS Version 84.06.5e.00.50
Physical Memory 2047 MB
Virtual Memory 2048 MB
Count of performance levels : 3
Level 1 - "Unknown"
GPU Clock 405 MHz
Shader Clock 405 MHz
Level 2 - "Overclocked"
GPU Clock 405 MHz
Shader Clock 810 MHz
Level 3 - "Unknown"
GPU Clock 540 MHz
Shader Clock 3305 MHz
 
 
 
 

JensF.
Forum has errors with pictures :-(

You don't have enough posts yet for that. Also I had to delete your previous post, as it had too many characters, and didn't make sense. This was due to you not being able to post your pic.

I have latest version and when using frame rate target as a limiter, I set it to 144 but it always sits at 133-134.

IDK hopefully they pulled it, its a joke, severly broken and should not have been released at all. Not to mention EVGA cant even bother to respond to this thread.
BTW here is a video as proof to one of the major issues I mentioned in my post earlier. Extremely annoying & should be fixed immediately.
gtx 980ti K|NGP|N
XOC 605
 
https://vid.me/Es7I
 

Older version can still be found here: http://www.evga.com/precisionx/
 
Next release will add proper voltage and overboost support + LED controls on KINGPIN card.

Instead of adding more features that just break things further. Why don't you guys really clamp down on major bug fixing and address those first? It seems like EVGA is to busy packing Precision with "features" and not nearly doing enough of bug fixing. 

6.0.5 crashes after 10 seconds of idle or after pressing 1 button in the software.
EVGA GTX 1070 FTW - NV driver: 372.54
 

We found the bug related to profiles not being saved and will fix it in next release.

fix the dang start up issue it contaminated older version that use to work. Now i have to load it manually each time

xEuphox
Would this be the thread to post a performance issue on or would I have to go and make a new thread? Please advise. The quick of jist is stability of OC X. I will wait until I am told this would be the proper thread to post into. Thanks in advance for any help offered and given.

Depends on the issue lol.

Post here, and if you need another thread, we can work on that after. Most Precision errors and performance issues would be best posted here so they are consolidated for ease of finding. The more threads that are opened, the harder to find specific issues.

 
New version:   http://forums.evga.com/EVGA-Precision-XOC-606-Released-m2546671.aspx 

I have to amend my previous concerns with the new PrecX program. It's working perfectly for me now, and in fact, it's running better than the previous version, which would quit running while I was in-game, causing the fan control to stop working, and then I'd see +70°c temps that I'd never see with fans on. Now it seems to run just fine. And I was confused about the LED setting, since I adjusted it via nVidia Experience, not PrecX, and now I see that the LED button is for KINGPIN cards. So, it's all good right now. 

Still isn't a stable build for me.

a11out
I watched the video on OC scanner. They mention quick test, full test, and manual. I got nothing of the sort in my version. Where can I find it? What version of the app has it?

For version 6.1.15 you simply click the button circled in red...

 
Until you reach the following screen...

 
Then you simply change the first option to manual and click run to start the oc scanner.
 
Note: Press the cog wheel circled in green to adjust the oc scanner settings.