KN3V3R
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2016/04/12 10:59:44
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/05/05 17:52:41
(permalink)
I recently bought an EVGA Z170 FTW Motherboard, and I did some research about the SLI Bridge V2. I was positive the long version would fit if I had a card in the PCI-E slot 1 and 3. Unfortunately it's a little short, is there an alternative that I could try from EVGA?
|
Re: EVGA PRO SLI Bridge V2
2016/05/05 17:57:19
(permalink)
KN3V3R
I recently bought an EVGA Z170 FTW Motherboard, and I did some research about the SLI Bridge V2. I was positive the long version would fit if I had a card in the PCI-E slot 1 and 3. Unfortunately it's a little short, is there an alternative that I could try from EVGA?
EVGA 3 way pro sli v2. That is 80mm long, which is the length of those two lanes. :-)
If you would like to use an affiliate code to register a product, feel free use this one: >Click Here< This is not my affiliate code! This is a random users code. This code will change often, and you will never be told who it belongs to! If you would like the possibility of your code being listed above, it must be in your signature block. I will not take requests to use a specific code.
|
KN3V3R
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2016/04/12 10:59:44
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/05/05 18:34:09
(permalink)
Scarlet-Tech
KN3V3R
I recently bought an EVGA Z170 FTW Motherboard, and I did some research about the SLI Bridge V2. I was positive the long version would fit if I had a card in the PCI-E slot 1 and 3. Unfortunately it's a little short, is there an alternative that I could try from EVGA?
EVGA 3 way pro sli v2. That is 80mm long, which is the length of those two lanes. :-)
I reliazed the measurement mistake soon after I posted -.-' Thanks for the swift reply though. Appreciate it!
|
dleblanc21
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2006/02/03 20:41:24
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/05/10 17:44:35
(permalink)
I just received mine today from Amazon. It seems to enable SLI, but doesn't light up. I have 2 EVGA 980 Ti Hybrids - is there something I need to do to get the light to work?
When I first power on, it looks like it flickers for a split second and then stays off.
|
DJ_Smoke
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2009/02/26 13:05:37
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/06/14 07:46:38
(permalink)
Why in the world would this illuminate on only "select" 970's but ALL 960's???? I love EVGA but this seems really stupid. I could understand if it was just for their "high-end" cards but ALL 960's? Thanks for saving me 30 bucks EVGA
|
BertMacklenFBI
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2016/06/17 04:38:55
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/06/17 05:20:28
(permalink)
[user]=145276323&filters[recent]=1&sort=1&o=0
I have the old SLI that came with my 2 660s, upgrading to a second 980 tomorrow and was wandering if it would work. I'm hoping not to have to buy the new bridge, any help would be appreciated.
Thanks guys!
|
BertMacklenFBI
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2016/06/17 04:38:55
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/06/17 23:28:23
(permalink)
|
Re: EVGA PRO SLI Bridge V2
2016/08/06 14:52:51
(permalink)
SLI'ing 2 GTX 980TI's on Z170 Classified (4-way) motherboard in slots 2 & 4.
Which SLI bridge would be appropriate ? Would it be the 60mm 2-Way (Standard) one ?
Thank you.
GPU: EVGA GTX 980 Ti Hybrid CPU: Intel i7 6700K Motherboard: EVGA Z170 Classified Memory: Corsair LPX Vengeance 4x4GB @ 3200MHz C16 Storage: Samsung 840 EVO 250GB SSD (Boot Drive) & HGST IDK Deskstar 3.5 inch 3TB Internal HDD PSU: EVGA Supernova 1200W P2 Platinum CPU Cooling: NOCTUA NH-D15S Chassis: Phanteks Enthoo Luxe 
|
EVGATech_BrandonS
EVGA Tech Support
- Total Posts : 352
- Reward points : 0
- Joined: 2016/01/28 13:52:01
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/08/06 15:57:10
(permalink)
Slots 2 and 4 would be a 40mm bridge, or the 2-Way Short.
|
Dukman
SSC Member
- Total Posts : 837
- Reward points : 0
- Joined: 2009/08/15 09:47:59
- Location: They keep telling me Zion
- Status: offline
- Ribbons : 2
Re: EVGA PRO SLI Bridge V2
2016/09/03 09:07:21
(permalink)
Picked up another one last week and was delighted to see that they are now coming with color panels so you can change the color of the EVGA logo.  I ordered my first one not too long after they were released and had to "mod" it to get the logo red. It was simple enough, but now it's so much easier. Good job guys. Thanks for actually listening.
Heatware B Movie: A work in progress.EVGA Z87 Classified, i7 4790k @ 4,4 Ghz, 2xEVGA 980Ti Classified, 32GB 2133Mhz Corsair Dominator RAM, Creative SB ZX soundcard, 2xSamsung 250GB SSD, 2xWD 1TB Velociraptor HDD, EVGA 1300w GS PSU. Corsair C70 I need cheaper hobbies.
|
MrImSoGood
FTW Member
- Total Posts : 1270
- Reward points : 0
- Joined: 2014/11/20 08:41:17
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/10/03 06:35:45
(permalink)
Would older gen cards benefit from these?
|
Nomanor
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2009/10/07 07:53:13
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/10/10 13:40:17
(permalink)
|
foremanspike
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2016/10/23 07:41:17
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/10/23 08:07:01
(permalink)
Which PRO SLI Bridge would fit and perform the best for two MSI GTX 1070 GAMING X 8G GPUs in a MSI Z87-G45 GAMING (MS-7821) motherboard?
|
EVGATech_JosephL
EVGA Tech Support
- Total Posts : 299
- Reward points : 0
- Joined: 2016/06/12 10:33:58
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/10/23 09:04:58
(permalink)
foremanspike
Which PRO SLI Bridge would fit and perform the best for two MSI GTX 1070 GAMING X 8G GPUs in a MSI Z87-G45 GAMING (MS-7821) motherboard?
For that motherboard you will want to install the graphics cards to PCI_E2 and PCI_E5. This will require a 60mm slot spacing SLI bridge. This will be Part Number 100-2W-0026-LR which is our 1 slot spacing HB bridge. HERE is the web page for that bridge.
|
EVGATech_JosephL
EVGA Tech Support
- Total Posts : 299
- Reward points : 0
- Joined: 2016/06/12 10:33:58
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/10/23 09:09:24
(permalink)
Nomanor
Guys, which SLI bridge size do I need for Asus Maximus VIII Formula board?
I guess 60mm?
(Do the bridge leds work on new Titan X Pascals?)
This will require a 60mm slot spacing SLI bridge as well. Part Number 100-2W-0026-LR which we call 1 slot spacing. HERE is the link.
|
JaguarJoey
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2010/09/28 13:17:41
- Location: Memphis, TN
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/10/26 11:26:05
(permalink)
Okay... I just purchased the X99 FTW K with two 1080 FTW Gaming ACX 3.0's. I just received the SLI 2-Way Bridge - Short.
From what I am seeing, I will need the 2-Way Standard / Long to work with my MOBO's 16x slots, correct? The MOBO and 1080's will be arriving tomorrow, so I don't have the new build in place. I just want to make sure that I have the right size SLI Bridge.
Thank you!
--Joey
|
EVGATech_JosephL
EVGA Tech Support
- Total Posts : 299
- Reward points : 0
- Joined: 2016/06/12 10:33:58
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/10/26 11:45:13
(permalink)
JaguarJoey
Okay... I just purchased the X99 FTW K with two 1080 FTW Gaming ACX 3.0's. I just received the SLI 2-Way Bridge - Short.
From what I am seeing, I will need the 2-Way Standard / Long to work with my MOBO's 16x slots, correct? The MOBO and 1080's will be arriving tomorrow, so I don't have the new build in place. I just want to make sure that I have the right size SLI Bridge.
Thank you!
--Joey
You will need an 80mm SLI bridge. This would be the EVGA PRO SLI BRIDGE HB (2 Slot Spacing). Part number: 100-2W-0027-LR found HERE.
|
JaguarJoey
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2010/09/28 13:17:41
- Location: Memphis, TN
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/10/26 12:16:06
(permalink)
Looks like I'll need to RMA the 100-2W-0024-LR that I purchased with my case.
Thank you!
|
EVGATech_JosephL
EVGA Tech Support
- Total Posts : 299
- Reward points : 0
- Joined: 2016/06/12 10:33:58
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2016/10/26 13:25:29
(permalink)
For anyone who is curious, the standard slot spacing between PCI lanes is 20mm. Here is an example of the slot spacing using our X99 Classified motherboard: 
|
