EVGA

EVGA PRO SLI Bridge V2

Page: << < ..1112131415 > Showing page 11 of 15
Author
Post
Essentials Only Full Version
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA PRO SLI Bridge V2 2015/07/22 18:27:30 (permalink)
She is [link=mailto:beautiful@]beautiful[/link]!  Well Done!


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#301
TheNewbyOverclocker
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2015/02/01 13:08:21
  • Location: Nevada, United States
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/07/25 22:47:33 (permalink)
which one works for the Maximus VII Hero,
the short 2-Way or the Long 2-Way?
 
EDIT: also, does SLIing a 970 FTW and 970 FTW+ work?
post edited by TheNewbyOverclocker - 2015/07/25 22:55:43
#302
Deanidge
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2015/07/22 12:25:08
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/07/25 23:07:13 (permalink)
TheNewbyOverclocker
which one works for the Maximus VII Hero,
the short 2-Way or the Long 2-Way?
 
EDIT: also, does SLIing a 970 FTW and 970 FTW+ work?

You'll want the long 2 way sli adaptor as it's a 60mm gap between slots.
Also, yes you can sli those cards, the system will just down clock the faster card to run at the same speed as the slower card although there's nothing to stop you using a program like msi afterburner to over clock the slower card up to the speed of the faster card.

Hope that helps
#303
TheNewbyOverclocker
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2015/02/01 13:08:21
  • Location: Nevada, United States
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/07/26 00:15:04 (permalink)
Deanidge
TheNewbyOverclocker
which one works for the Maximus VII Hero,
the short 2-Way or the Long 2-Way?
 
EDIT: also, does SLIing a 970 FTW and 970 FTW+ work?

You'll want the long 2 way sli adaptor as it's a 60mm gap between slots.
Also, yes you can sli those cards, the system will just down clock the faster card to run at the same speed as the slower card although there's nothing to stop you using a program like msi afterburner to over clock the slower card up to the speed of the faster card.

Hope that helps

well they are the same, except for a few things if you compare them in NewEgg
#304
DarkAngel_ZERO
Superclocked Member
  • Total Posts : 144
  • Reward points : 0
  • Joined: 2007/09/15 15:01:56
  • Status: offline
  • Ribbons : 2
Re: EVGA PRO SLI Bridge V2 2015/08/06 11:38:56 (permalink)
Well, just got my bridge, but the light isn't working on my Titan X setup. Same thing happened with the metal one from Nvidia as well. Any ideas? 
#305
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA PRO SLI Bridge V2 2015/08/06 12:20:01 (permalink)
TheNewbyOverclocker
which one works for the Maximus VII Hero,
the short 2-Way or the Long 2-Way?
 
EDIT: also, does SLIing a 970 FTW and 970 FTW+ work?


No. Read the compatibility list for the 970's and sli from EVGA. EVGA initially didn't include lighting control through the 970 and there were other issues with the 970's.. EVGA updated the 970ftw to the ftw+, fixing the sli issue with lighting, but in the process made it incompatible with some of the same family of cards.

One example: http://forums.evga.com/m/tm.aspx?m=2333512&p=1


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#306
Airbrushkid
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2007/09/21 23:21:25
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/10 04:41:12 (permalink)
Hi,
   I bought Sli Pro V2  2 way and want to change the color. But how do I do that? On EVGA's webpage they show this --
So they don't come in the box with the bridge. Where can I get them??
 
 
 

Intel 4770k  l Asus Sabertooth Z97 Tuf 2  l 32 gig Corsair Dominator Platinum  DDR 2133  l 2 - eVGA GTX 980's SC Ref SLI  l Intel 750 Series 1.2TB PCIe NVMe 3.0 x4 SSD  l WD 3 - 4TB l On board sound l Corsair AX1200i  l Windows 7 Ultimate 64 bit l 3 X Dell E248WFP 24" Monitors
#307
aliencds
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2015/08/10 19:04:43
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/10 19:07:03 (permalink)
 I currently own an EVGA TitanX Superclocked.
 
I would like to purchase another one for an SLI Configuration.
 
Can you provide some insight as to which SLI Bridge I need to buy (Long or short? )
 
I have an ASUS X-99 Deluxe Mobo and paired with an i7 5930k CPU
 
I'm hesistant to buy the card till I can figure out what slot on the mobo it should be installed on and what Bridge to buy. Appreciate your help
#308
karlfuller
New Member
  • Total Posts : 21
  • Reward points : 0
  • Joined: 2009/06/24 05:59:04
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/13 09:22:30 (permalink)
Hey guys
 
I have an EVGA X99 Classified coming soon but wanted to get a nice looking EVGA Pro SLI Bridge V2,
But wanted to get the one that covered both slots on both cards ,
 
This one EVGA Pro SLI Bridge V2 (3-Way/2-Way)P/N: 100-3W-0032-LR ,
 
I would like to know before ordering .....
 
 
Thanks 
#309
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA PRO SLI Bridge V2 2015/08/13 09:26:47 (permalink)
karlfuller
Hey guys
 
I have an EVGA X99 Classified coming soon but wanted to get a nice looking EVGA Pro SLI Bridge V2,
But wanted to get the one that covered both slots on both cards ,
 
This one EVGA Pro SLI Bridge V2 (3-Way/2-Way)P/N: 100-3W-0032-LR ,
 
I would like to know before ordering .....
 
 
Thanks 


it will cover both slots

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
#310
brianfist101
New Member
  • Total Posts : 18
  • Reward points : 0
  • Joined: 2015/08/13 13:50:50
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/13 13:53:26 (permalink)
I just purchased a V2 Long SLI Bridge.  It did not come with the color stickers to change LED light color.  Where do I get this?  See link to see what I'm talking about.
 

 
 
#311
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA PRO SLI Bridge V2 2015/08/13 13:58:55 (permalink)
brianfist101
I just purchased a V2 Long SLI Bridge.  It did not come with the color stickers to change LED light color.  Where do I get this?  See link to see what I'm talking about.
 

 
 


You are too new for links.

We know what you are talking about though, and I don't think evga actually offers them.


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#312
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA PRO SLI Bridge V2 2015/08/13 14:08:48 (permalink)
brianfist101
I just purchased a V2 Long SLI Bridge.  It did not come with the color stickers to change LED light color.  Where do I get this?  See link to see what I'm talking about.
 
 
 
 


 
I picked up the film on Amazon for a couple bucks to do mine


 
here ya go

post edited by Pgcmoore - 2015/08/13 14:12:54

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
#313
karlfuller
New Member
  • Total Posts : 21
  • Reward points : 0
  • Joined: 2009/06/24 05:59:04
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/14 06:30:11 (permalink)
Pgcmoore
karlfuller
Hey guys
 
I have an EVGA X99 Classified coming soon but wanted to get a nice looking EVGA Pro SLI Bridge V2,
But wanted to get the one that covered both slots on both cards ,
 
This one EVGA Pro SLI Bridge V2 (3-Way/2-Way)P/N: 100-3W-0032-LR ,
 
I would like to know before ordering .....
 
 
Thanks 


it will cover both slots




 
Oh Great so will fit ...
#314
Airbrushkid
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2007/09/21 23:21:25
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/15 10:14:46 (permalink)
Call EVGA and explain that they did not come in the box with the bridge. They will send them to you. There suppose to come in the box.
 
 
brianfist101
I just purchased a V2 Long SLI Bridge.  It did not come with the color stickers to change LED light color.  Where do I get this?  See link to see what I'm talking about.
 
 
 
 




post edited by Airbrushkid - 2015/08/15 10:31:57

Intel 4770k  l Asus Sabertooth Z97 Tuf 2  l 32 gig Corsair Dominator Platinum  DDR 2133  l 2 - eVGA GTX 980's SC Ref SLI  l Intel 750 Series 1.2TB PCIe NVMe 3.0 x4 SSD  l WD 3 - 4TB l On board sound l Corsair AX1200i  l Windows 7 Ultimate 64 bit l 3 X Dell E248WFP 24" Monitors
#315
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA PRO SLI Bridge V2 2015/08/15 10:18:09 (permalink)
Airbrushkid
Call EVGA and explain that they did not come in the box with the bridge. They will send to you. There suppose to come in the box.



That is some good information, thank you for sharing.


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#316
spltscreen
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2008/12/25 10:24:29
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/19 12:49:50 (permalink)
yapchagi
Thank you so much for this!
Perhaps eVGA should update the article page for Pro SLI bridge V2 and mention that the LED light will work on 980 Ti cards too.



Sadly, my SLI v2 LED light is NOT working for my pair of GeForce GTX 980 Ti cards. I am using GIGABYTE GV-N98TG1 "Windforce" cards. The bridge is functioning fine for SLI purposes, it just doesn't light up. I don't see any options specifically for the bridge in the GeForce experience panel, just for the card's individual lighting dynamics. Is this just a lack of compatibility?
#317
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA PRO SLI Bridge V2 2015/08/19 14:24:13 (permalink)
spltscreen
yapchagi
Thank you so much for this!
Perhaps eVGA should update the article page for Pro SLI bridge V2 and mention that the LED light will work on 980 Ti cards too.



Sadly, my SLI v2 LED light is NOT working for my pair of GeForce GTX 980 Ti cards. I am using GIGABYTE GV-N98TG1 "Windforce" cards. The bridge is functioning fine for SLI purposes, it just doesn't light up. I don't see any options specifically for the bridge in the GeForce experience panel, just for the card's individual lighting dynamics. Is this just a lack of compatibility?


You should contact gigabyte and see what they said. They shouldn't be incompatible, but they may be.


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#318
anupkumarrao@nc.rr.com
New Member
  • Total Posts : 52
  • Reward points : 0
  • Joined: 2009/04/09 19:09:45
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/19 16:24:04 (permalink)
Just picked up mine (3 Way) since I am using slot 1 & 4 on my x99 ftw board as suggested in this Forum. Can't wait !!
#319
on1yalad
New Member
  • Total Posts : 66
  • Reward points : 0
  • Joined: 2006/04/23 14:52:23
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/20 16:30:15 (permalink)
i have a x99 classified, and cards in Slot 1 and Slot 3
i bought the http://www.evga.com/Products/Product.aspx?pn=100-2W-0023-LR - 60mm
But when i put it on it is shor from connecting the bottom card.
Do i need to buy the http://www.evga.com/Products/Product.aspx?pn=100-3W-0032-LR - 80mm 2/3way SLI? (seems like this would be too long) 
 

Intel i7 5820K @ 4.6GHz, 32GB G-Skill RipJaws 4@ 2400MHz, 2x EVGA 980ti w/ AIO Hybrid cooler, EVGA x99 Classified, 4x Intel 730 SSD 480GB, 2x HGST 3TB, NZXT Kraken X61, Dell U3415W 21:9, BenQ XL2420TX, Windows 10 Pro, CM Carbide Air 540, EVGA Supernova 1000P2
#320
wyonts
New Member
  • Total Posts : 42
  • Reward points : 0
  • Joined: 2007/06/09 19:16:11
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/20 17:23:45 (permalink)
Since the led does not light up with my 970's I opened up the bridge and applied 5v volts from a molex connector to the wires for the led and got it to work. My question is what is the voltage for the led coming off the cards that do support the led ? Would anyone be so brave as to check for me?  I tried both 12v and 5v, both worked and I stuck with the lower, just curious as to what is the actual voltage. Thanks

Clueless On The East Coast. 


#321
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA PRO SLI Bridge V2 2015/08/20 17:32:16 (permalink)
on1yalad
i have a x99 classified, and cards in Slot 1 and Slot 3
i bought the http://www.evga.com/Products/Product.aspx?pn=100-2W-0023-LR - 60mm
But when i put it on it is shor from connecting the bottom card.
Do i need to buy the http://www.evga.com/Products/Product.aspx?pn=100-3W-0032-LR - 80mm 2/3way SLI? (seems like this would be too long) 
 


from looking at your board, the one you got should work, did you check your cards  brackets are installed right? try loosing them up and installing the bridge,
 
edit: or is your second card in slot 4? because slots 1 and 3 should be 60mm apart on the x99 classy
post edited by Pgcmoore - 2015/08/20 18:20:12

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
#322
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA PRO SLI Bridge V2 2015/08/20 18:22:32 (permalink)
Scarlet-Tech
Airbrushkid
Call EVGA and explain that they did not come in the box with the bridge. They will send to you. There suppose to come in the box.



That is some good information, thank you for sharing.

i got two of them and there was nothing in the boxes but the bridges,,,
 
 
would like to hear something from evga on this???
post edited by Pgcmoore - 2015/08/20 18:26:45

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
#323
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA PRO SLI Bridge V2 2015/08/20 18:25:47 (permalink)
Pgcmoore
i got two of them and there was nothing in the boxes but the bridges,,,


I used flash film to change mine, and I actually wish I could get it more vibrant than it is.

I wish they would pass out an Orange color block.. Or, any of the ones they advertise... That would be nice.


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#324
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA PRO SLI Bridge V2 2015/08/20 18:29:48 (permalink)
i plan to paint the outer cover on one of them tomorrow / white , and use the red film like i did on the older ones (they were ok but not to bright), i had to do 4 layers to get the right color, but from what i have seen of the new ones with the side lighting the effect should be much better than the back lighting on the old ones, although they also look pretty good:
 

 
 
they are a much deeper red than the pic shows
but the lighting is not , even across the logo
post edited by Pgcmoore - 2015/08/21 07:25:42

Attached Image(s)


   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
#325
on1yalad
New Member
  • Total Posts : 66
  • Reward points : 0
  • Joined: 2006/04/23 14:52:23
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/20 19:28:23 (permalink)
Pgcmoore
on1yalad
i have a x99 classified, and cards in Slot 1 and Slot 3
i bought the http://www.evga.com/Products/Product.aspx?pn=100-2W-0023-LR - 60mm
But when i put it on it is shor from connecting the bottom card.
Do i need to buy the http://www.evga.com/Products/Product.aspx?pn=100-3W-0032-LR - 80mm 2/3way SLI? (seems like this would be too long) 
 


from looking at your board, the one you got should work, did you check your cards  brackets are installed right? try loosing them up and installing the bridge,
 
edit: or is your second card in slot 4? because slots 1 and 3 should be 60mm apart on the x99 classy




Well played i was testing this thread...I kid, i had forgot i put it in Slot 4 as i have a 5820k and Slot 3 is disabled.
 
So now i am ordering a 5960X so that i can use slot 3 so i can use the SLI bridge. Do you think that it is worth it to get the chip from http://siliconlottery.com/products/5960x47g

Intel i7 5820K @ 4.6GHz, 32GB G-Skill RipJaws 4@ 2400MHz, 2x EVGA 980ti w/ AIO Hybrid cooler, EVGA x99 Classified, 4x Intel 730 SSD 480GB, 2x HGST 3TB, NZXT Kraken X61, Dell U3415W 21:9, BenQ XL2420TX, Windows 10 Pro, CM Carbide Air 540, EVGA Supernova 1000P2
#326
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA PRO SLI Bridge V2 2015/08/21 07:51:41 (permalink)
on1yalad
Pgcmoore
on1yalad
i have a x99 classified, and cards in Slot 1 and Slot 3
i bought the http://www.evga.com/Products/Product.aspx?pn=100-2W-0023-LR - 60mm
But when i put it on it is shor from connecting the bottom card.
Do i need to buy the http://www.evga.com/Products/Product.aspx?pn=100-3W-0032-LR - 80mm 2/3way SLI? (seems like this would be too long) 
 


from looking at your board, the one you got should work, did you check your cards  brackets are installed right? try loosing them up and installing the bridge,
 
edit: or is your second card in slot 4? because slots 1 and 3 should be 60mm apart on the x99 classy




Well played i was testing this thread...I kid, i had forgot i put it in Slot 4 as i have a 5820k and Slot 3 is disabled.
 
So now i am ordering a 5960X so that i can use slot 3 so i can use the SLI bridge. Do you think that it is worth it to get the chip from http://siliconlottery.com/products/5960x47g


i know little on that board but i think the 4 slot is best (x16) compared to 3 slot (x8) but depends on the cpu on what lanes you have, the 5960 is a bad boy but you may be better with the 5930, depends on what you do .
I would just keep it in slot 4  ( that WOULD require the 100-3W-0032-LR ) 80mm

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
#327
Airbrushkid
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2007/09/21 23:21:25
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/21 23:46:10 (permalink)
I finally got the 3 black pieces of plastic with the word EVGA in red, green and blue. They are stickers! If you place them on the outside of the bridge they don't really light up that good. So I don't really know how they are suppose to work.

Intel 4770k  l Asus Sabertooth Z97 Tuf 2  l 32 gig Corsair Dominator Platinum  DDR 2133  l 2 - eVGA GTX 980's SC Ref SLI  l Intel 750 Series 1.2TB PCIe NVMe 3.0 x4 SSD  l WD 3 - 4TB l On board sound l Corsair AX1200i  l Windows 7 Ultimate 64 bit l 3 X Dell E248WFP 24" Monitors
#328
Pgcmoore
CLASSIFIED Member
  • Total Posts : 2037
  • Reward points : 0
  • Joined: 2011/03/27 09:29:41
  • Location: Florida
  • Status: offline
  • Ribbons : 14
Re: EVGA PRO SLI Bridge V2 2015/08/22 00:46:12 (permalink)
Airbrushkid
I finally got the 3 black pieces of plastic with the word EVGA in red, green and blue. They are stickers! If you place them on the outside of the bridge they don't really light up that good. So I don't really know how they are suppose to work.


sounds like they are for cards that do not light up the bridges...maybe????

   "This program has performed an illegal operation and will be shut down"    
                              
                        My Affiliate Code is  05G-UGD-GZVU
 
#329
Airbrushkid
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2007/09/21 23:21:25
  • Status: offline
  • Ribbons : 0
Re: EVGA PRO SLI Bridge V2 2015/08/22 02:43:10 (permalink)
I think you wrong. EVGA says there suppose to be included with the SLI PRO Bridge V2. So you can change the color of the lite up EVGA part of the bridge to Red, Blue or Green.
 
Plus think about it. Why would they send these different color stickers to put on the bridge if you cannot see the color!!
 
 
Pgcmoore
Airbrushkid
I finally got the 3 black pieces of plastic with the word EVGA in red, green and blue. They are stickers! If you place them on the outside of the bridge they don't really light up that good. So I don't really know how they are suppose to work.


sounds like they are for cards that do not light up the bridges...maybe????





Intel 4770k  l Asus Sabertooth Z97 Tuf 2  l 32 gig Corsair Dominator Platinum  DDR 2133  l 2 - eVGA GTX 980's SC Ref SLI  l Intel 750 Series 1.2TB PCIe NVMe 3.0 x4 SSD  l WD 3 - 4TB l On board sound l Corsair AX1200i  l Windows 7 Ultimate 64 bit l 3 X Dell E248WFP 24" Monitors
#330
Page: << < ..1112131415 > Showing page 11 of 15
Jump to:
  • Back to Mobile