The Veterant
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2012/06/16 16:24:29
- Status: offline
- Ribbons : 0
Does this card is a regular 980 with water cooling block or its a classy or what regular model is equal to with the hydroCopper install. Thanks for any info on this.
Note: P/N: 04G-P4-2989-KR
|
Tropickz
SSC Member
- Total Posts : 735
- Reward points : 0
- Joined: 2009/10/28 00:48:15
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/01/17 12:23:28
(permalink)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/01/17 12:31:55
(permalink)
The hydro cropper is not a classy with a water block slapped onto it. The hydro copper is basically a 980 superclocked with a water block and higher clock speeds.
|
The Veterant
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2012/06/16 16:24:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/01/17 13:52:26
(permalink)
Thanks to both, I bought this card but I haven't installed it yet, and I'm still running my SLI (2) GTX 670DC2T, can some one tell if the gain it will noticeable with this card in compare my SLI @ 1225Mhz its also both water cooled.
|
The Veterant
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2012/06/16 16:24:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/01/22 14:57:02
(permalink)
Well today finally got my GTX 980 Hydro installed, in performance wise it's close to my GTX670 DC2T SLI that I had, I haven't OC the card yet just using it at stock for a week so it can get use to my system then we see, how lucky I'm with this GPU, the newest driver works like charm for me 347.25, a lot people have issues with the GPU% not going over 45 or 50% usage but mine went upto 90 95% while playing BF4. @ first a saw the same issue uninstall the driver and reinstalled it back, then afterwards ran the winsat formal in the CMD and everything is normal so far.
|
Tropickz
SSC Member
- Total Posts : 735
- Reward points : 0
- Joined: 2009/10/28 00:48:15
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/01/22 15:07:43
(permalink)
 Gonna go SLI in the near future ?
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/01/22 18:36:37
(permalink)
Sajin
The hydro cropper is not a classy with a water block slapped onto it. The hydro copper is basically a 980 superclocked with a water block and higher clock speeds.
That are the same clock speeds as the Classified Card
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/01/22 18:42:29
(permalink)
bcavnaugh
Sajin
The hydro cropper is not a classy with a water block slapped onto it. The hydro copper is basically a 980 superclocked with a water block and higher clock speeds.
That are the same clock speeds as the Classified Card
Yes I know, but the PCB is just like the 980 SC. It's not a Classified PCB.
|
The Veterant
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2012/06/16 16:24:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/02 12:39:53
(permalink)
This is to let the audience know that my HydroCopper is working as expected so far. Using driver ver. 347.25 with a ASUS PG278Q, G-sync enable and it runs @ 144Mhz while playing BF4 constant, verified with MSI Afterburner tool, this tool is very awesome I can monitor every detail in my computer as far as CPU and GPU. This card by it self auto boost to 1445Mhz without OC anything, my self just adding a +91 offset it gets to 1542 no OV or anything, just the offset value and it stays cool at 32C while playing BF4 at this Clockspeed, got lucky that I got from the EGG. I had (2) GTX670DC2Top and this card by it self it do a lot more than this two cards in SLI mode that I had them. Worth the money spend!
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/02 12:41:52
(permalink)
Glad you like yours, I do like mine.
|
rintala
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2014/01/17 14:12:17
- Location: Finland
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/07 11:25:34
(permalink)
My Hydro coppers.. (GTX980 ACX) hydro block installed...  
i7-6700k | Maximus VIII Extreme | 2 x Evga GTX1080FTW | 16GB 3000MHz | 2 x 250GB SSD | 2000GB HDD | Obsidian 900D | MAD CATZ STRIKE 7 & R.A.T 9 | Asus ROG Swift PG278Q | Asus RT-AC68 | Win 10 insider
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/07 11:37:56
(permalink)
rintala
My Hydro coppers.. (GTX980 ACX) hydro block installed...
Nice looking Rig you have, you should build a MODS RIGS Build. The clocks are higher on the HC Model than the ACX Model. EVGA GeForce GTX 980 Hydro CopperPart Number: 04G-P4-2989-KR - 1291MHz Base Clock
- 1393MHz Boost Clock
- 165GT/s Texture Fill Rate
- 4096MB GDDR5 Memory
- 7010MHz Memory Clock
- 224.3GB/s Memory Bandwidth
EVGA GeForce GTX 980 Classified ACX 2.0Part Number: 04G-P4-3988-KR - 1291MHz Base Clock
- 1393MHz Boost Clock
- 165GT/s Texture Fill Rate
- 4096MB GDDR5 Memory
- 7010MHz Memory Clock
- 224.3GB/s Memory Bandwidth
EVGA GeForce GTX 980 Superclocked ACX 2.0Part Number: 04G-P4-2983-KR - 1266MHz Base Clock
- 1367MHz Boost Clock
- 162GT/s Texture Fill Rate
- 4096MB GDDR5 Memory
- 7010MHz Memory Clock
- 224.3GB/s Memory Bandwidth
EVGA GeForce GTX 980 ACX 2.0Part Number: 04G-P4-2981-KR - 1126MHz Base Clock
- 1216MHz Boost Clock
- 144GT/s Texture Fill Rate
- 4096MB GDDR5 Memory
- 7010MHz Memory Clock
- 224.3GB/s Memory Bandwidth
post edited by bcavnaugh - 2015/02/07 11:41:20
|
rintala
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2014/01/17 14:12:17
- Location: Finland
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/07 11:56:17
(permalink)
Thanks, yes i have custom bios on both cards.. Original both cards are Part Number: 04G-P4-2981-KR but runs with hydro so easy 1500-1600MHz.. Patuga coldzero made me a custom backplates, but i havent get them yet. 
i7-6700k | Maximus VIII Extreme | 2 x Evga GTX1080FTW | 16GB 3000MHz | 2 x 250GB SSD | 2000GB HDD | Obsidian 900D | MAD CATZ STRIKE 7 & R.A.T 9 | Asus ROG Swift PG278Q | Asus RT-AC68 | Win 10 insider
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
|
The Veterant
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2012/06/16 16:24:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/07 15:36:53
(permalink)
@ RINTALA
Those are very nice OCs, My rig only have one card and it is the hydrocooper from EVGA, I haven't flash the Bios yet, with the stock bios I play BF4 @ 1534Mhz, Memory @7225Mhz with only 110% on Core Voltage, I use MSI Afterburner tool. My temp says in MSI 35C at that speed. I probably can hit 1650Mhz with the same ModBios that you have, did you got it from TM pc?. Nice rig by the way.
|
rintala
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2014/01/17 14:12:17
- Location: Finland
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/07 15:59:24
(permalink)
If i remember right it was nolimits bios http : //www. overclock.net/t/1517316/extract-and-flash-gtx-970-and-980-firmware-zosons-h2o-and-air-custom-bios I havent tested yet over 1600MHz, guess it runs, becouse 1582MHz goes so easily. i have use evga precision x to overclocked over nolimits original... My temps are 50c if i play 30min BF4 with my asus G-Sync 144Hz monitor.. Here are one 3dmark11 
post edited by rintala - 2015/02/07 16:02:36
i7-6700k | Maximus VIII Extreme | 2 x Evga GTX1080FTW | 16GB 3000MHz | 2 x 250GB SSD | 2000GB HDD | Obsidian 900D | MAD CATZ STRIKE 7 & R.A.T 9 | Asus ROG Swift PG278Q | Asus RT-AC68 | Win 10 insider
|
danielblackmore
New Member
- Total Posts : 75
- Reward points : 0
- Joined: 2009/12/14 21:46:57
- Location: Seattle, WA
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/08 17:22:05
(permalink)
I put myself on the auto notify to get 3, is there a recommended WC bridge? I used the EVGA 680 3xsli WC bridge on my current system and it saved me a huge hassle. Thanks  EDIT - to be specific, one of these for the 980's... 
post edited by danielblackmore - 2015/02/08 17:43:15
Attached Image(s)
R4E/3960X/Win7 64/Pro 16GB G.Skill F3-14900CL9D-8GBSR 3 X EVGA GTX 680/4GB, 04G-P4-2686-KR 3 X ASUS VG Series VG278H - Surround 3D 1 X EVGA GT 610 2 GB, 02G-P3-2617-KR 1 X Planar SA2311W for 2D Intel 520 Series SSD's SilverStone ST1500W PSU
|
rintala
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2014/01/17 14:12:17
- Location: Finland
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/08 17:24:56
(permalink)
EVGA Pro SLI Bridge (3-Way/2-Way) ??
100-3W-0031-LR
i7-6700k | Maximus VIII Extreme | 2 x Evga GTX1080FTW | 16GB 3000MHz | 2 x 250GB SSD | 2000GB HDD | Obsidian 900D | MAD CATZ STRIKE 7 & R.A.T 9 | Asus ROG Swift PG278Q | Asus RT-AC68 | Win 10 insider
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
|
anazare11
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2013/02/20 11:29:25
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/08 19:59:58
(permalink)
Any word when the Hydro copper will be back in stock?
|
The Veterant
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2012/06/16 16:24:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/13 12:29:20
(permalink)
All I know is this, it's time for me to buy me another HYDROCopper I have reach with mine the 1600Mz with its own BIOS from factory, Play BF4 for hors @ 1580Mhz and my FPS are close to be almost a 144fps solid line while playing with settings all (HIGH). I own an ASUS PG278Q and I use Afterburner and it shows an almost solid line while playing BF4 @ this clock speed, Nice video card I think I could said that I might have a GOLDEN gpu. I say this cause, there is around a BIOS mod that after flash you can reach the 1700Mhz and by doing that this Mod BIOS the only different from my card its that the Voltage go up to 1.275V and mine does 1.225 and with this I already reach the 1600Mhz using afterburner so and the GPU haven't crash yet, so I think I have a good GPU.
* What your guys think, from those GTX 980 owners. Have anybody have got more than 1600Mhz from theirs 980 GPU with stock BIOS?
|
necriosity
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2010/03/09 13:17:02
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/02/15 22:51:41
(permalink)
anazare11
Any word when the Hydro copper will be back in stock?
No clue, but waiting impatiently.
|
JohnWorfin
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2015/02/02 15:03:50
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/03/02 17:05:49
(permalink)
They are back in stock as I am writing this
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/03/02 17:10:45
(permalink)
JohnWorfin
They are back in stock as I am writing this
Yep! 10 In Stock.
|
andrejmart
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2009/04/08 19:29:17
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/03/03 07:55:45
(permalink)
Is there a way to convert the EVGA GeForce GTX 980 Hydro to a single slot card?
|
n3xuz
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2010/04/24 14:51:24
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/03/03 08:17:13
(permalink)
andrejmart
Is there a way to convert the EVGA GeForce GTX 980 Hydro to a single slot card?
prolly gonna be hard since the DVI connector is on the second slot while the HDMI and DP ports are on the first slot. and just gonna borrow the thread abit, what sorts of clocks offset should be possible with these cards? or is even failure to OC them even beyond bare stock something that can be RMAed? because i seem to have problem to run stable at pushing the slider just barely to 30MHz offset. im running atm the driver 347.25 becuase when i used the latest 347.52 i couldn't even pass 20MHz before it chrashed the driver with 347.25 i could for some reason run 120MHz offset in 3DMark but playing a game like CSGO for around 25min into a MM game it chrashes the driver, so at the moment i basiclly just runs it in stock becuase i dont know what to do seems that up the voltage doesnt make a diffrence either with +0 or +87
post edited by n3xuz - 2015/03/03 08:31:03
[CPU: Intel i7-4790k @ 4.8GHz]
[MB: Asus Formula VII Hero ROG]
[GFX: EVGA Gefore GTX 980 Hydro Copper @ 1495/2000]
[RAM: Kingston Fury 1600MHz 16GB]
[Case: Fractal Define R5]
[SSD: 2xIntel 330 120GB Raid 0 + Samsung 850 Pro 1TB]
[Headphones: Beyerdynamic DT880 Pro 250ohm]
[Mic: Blue Snowball]
[DAC/AMP: Asus Xonar Essence One]
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/03/03 12:55:40
(permalink)
n3xuz
andrejmart
Is there a way to convert the EVGA GeForce GTX 980 Hydro to a single slot card?
prolly gonna be hard since the DVI connector is on the second slot while the HDMI and DP ports are on the first slot.
and just gonna borrow the thread abit,
what sorts of clocks offset should be possible with these cards? or is even failure to OC them even beyond bare stock something that can be RMAed? because i seem to have problem to run stable at pushing the slider just barely to 30MHz offset. im running atm the driver 347.25 becuase when i used the latest 347.52 i couldn't even pass 20MHz before it chrashed the driver with 347.25 i could for some reason run 120MHz offset in 3DMark but playing a game like CSGO for around 25min into a MM game it chrashes the driver, so at the moment i basiclly just runs it in stock becuase i dont know what to do seems that up the voltage doesnt make a diffrence either with +0 or +87
If you do it will void the warranty, that is cut it off like another user has shown us here on the Forum. http://forums.evga.com/Hey-EVGA-I-fixed-your-2-slot-problem-StopMaking2slotBrackets-m2267506.aspx
post edited by bcavnaugh - 2015/03/03 13:00:48
|
andrejmart
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2009/04/08 19:29:17
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/03/15 07:17:57
(permalink)
Thanks for the reply. Using Dremel to cut the DVI connector on the second channel out is not precisely my idea to convert the two slot GTX980 Hydro to single-slot, but it appears that is the only way. It is not that long ago that every motherboard had to have parallel printer port, keyboard port, mouse port, PS232,,,.. now all the ports are handled via USB ports. In time the preconceive ideals change. Keep thinking about the GPU cards in LSI configuration we have the card in slot 1 that needs connector to monitor, the cards in other slots need only the LSI edge connector. Now put that into you pipe and prouder on that. My new 4K monitor does not have DVI port.
post edited by andrejmart - 2015/03/15 07:21:22
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/03/15 08:54:28
(permalink)
As hard as the GTX 980 HC Model is to get remember that you could kill your SLI Setup with one dead card.
What do you think you will gain by do this?
|
andrejmart
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2009/04/08 19:29:17
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 980 Hydro Copper question
2015/03/15 14:02:27
(permalink)
Thanks for the comment. I need FIVE PCIe 3.0 slots. My Asrock X99 Extreme11 has 5 PCIe 3.0 slots in the following possible configurations 5 x PCI Express 3.0 x16 Slots (PCIE1/PCIE2/PCIE3/PCIE4/PCIE5: single at x16 (PCIE1); dual at x16 (PCIE1) / x16 (PCIE4); triple at x16 (PCIE1) / x16 (PCIE2) / x16 (PCIE4); quad at x16 (PCIE1) / x16 (PCIE2) / x16 (PCIE4) / x16 (PCIE5)). If double slot GPU is placed in slot 2 no card can be placed in slot 3 and when double slot card is placed in slot 5 the motherboard ports below are blocked. I want Quad LSI and one slot for other PCIe 3.0 function, i.e. will need all five PCIe 3.0 slots. This leaves me only slots 1 and 4 that can have double slot GPU.
post edited by andrejmart - 2015/03/18 14:39:39
|