Artah
New Member
- Total Posts : 86
- Reward points : 0
- Joined: 2015/01/04 16:35:13
- Location: Long Beach, CA
- Status: offline
- Ribbons : 0
I was just thinking today that EVGA should buy out CaseLabs or merge so they can make a cooler case together and boom! I saw the EVGA DG-8 Case on the website. I like the TV like setup where I can watch my fast video cards that cost me thousands.
|
Re: EVGA DG-8 Case
2016/06/01 22:22:10
(permalink)
My Affiliate Code: 8WEQVXMCJL 
|
Re: EVGA DG-8 Case
2016/06/03 05:27:42
(permalink)
Great Case for premium builds. Transparent panel perfectly present most important hardware, motherboard, graphic cards and cooling solution.  EVGA's Monstrous DG-87 Chassis May Actually Deserve 'VR-Ready' Status http://www.tomshardware.c...se-computex,31939.html
|
Re: EVGA DG-8 Case
2016/06/03 21:05:48
(permalink)
I am laughing at the pre order timer. Countdown to pre order, no way to pre order.
|
Re: EVGA DG-8 Case
2016/06/04 17:56:42
(permalink)
donta1979
I am laughing at the pre order timer. Countdown to pre order, no way to pre order.
"Countdown to pre order" = when the timer reaches 0, you can pre-order. The product doesn't ship until August.
|
Re: EVGA DG-8 Case
2016/06/06 10:20:13
(permalink)
EVGA Power Link will move all of these VGA Power cables to the motherboard tray. They will be visible only 2-3cm and only if you look on them... from front side like they are not connected at all. EVGA Power Link is one of smartest tool I saw in last few years for PC... I think they should become part of every EVGA Graphic Card Package next year.  You see on pictures... only little peace as 24pin from VGA Power cables will be visible.
|
Re: EVGA DG-8 Case
2016/06/06 14:49:42
(permalink)
donta1979
I am laughing at the pre order timer. Countdown to pre order, no way to pre order.
Lol, as xlbloodlx stated.. That is exactly what the countdown is for. Wouldnt it be pretty foolish to put a countdown timer to preorder, if you can already preorder?
If you would like to use an affiliate code to register a product, feel free use this one: >Click Here< This is not my affiliate code! This is a random users code. This code will change often, and you will never be told who it belongs to! If you would like the possibility of your code being listed above, it must be in your signature block. I will not take requests to use a specific code.
|
Slimshiesty
CLASSIFIED Member
- Total Posts : 2407
- Reward points : 0
- Joined: 2007/12/08 11:29:43
- Location: Colorado Springs, Co.
- Status: offline
- Ribbons : 4
Re: EVGA DG-8 Case
2016/06/07 08:29:44
(permalink)
From the looks of it from the above pics...looks like the panel inside that says EVGA will be removable for reservoir/Water cooling options.
Hope it will for those enthusiasts who will be water cooling.
CPU Intel i7 6700K @ 4.0 GHz MB MSI Z170A M7 GPU EVGA GTX 1070 FTW MEM Avexir ROG Red Tesla DDR4 2666 PSU EVGA Supernova 850 G2 CASE EVGA DG-87
|
atfrico
Omnipotent Enthusiast
- Total Posts : 8719
- Reward points : 0
- Joined: 2008/05/20 16:16:06
- Location: <--Dip, Dip, Potato Chip!-->
- Status: offline
- Ribbons : 22
Re: EVGA DG-8 Case
2016/06/07 16:11:02
(permalink)
xlbloodlx
donta1979
I am laughing at the pre order timer. Countdown to pre order, no way to pre order.
"Countdown to pre order" = when the timer reaches 0, you can pre-order. The product doesn't ship until August.
Still clicking and is not working man, the hell!!! there is not such thing as a pre order countdown, it is like me saying pre-order countdown the funds on my wallet after their release! Think McFly, Think!! P.S.: To the WebMaster: I request a new facepalm smilies added to the forum please, pretty please sugar on top
Those who abuse power, are nothing but scumbags!  The challenge of power is how to use it and not abuse it. When you abuse it, it reverses on you and it hurts you.The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
|
Shockjockey
CLASSIFIED Member
- Total Posts : 4799
- Reward points : 0
- Joined: 2006/11/29 14:24:02
- Location: OHIO
- Status: offline
- Ribbons : 17
Re: EVGA DG-8 Case
2016/06/08 06:10:42
(permalink)
I want it but 50 pounds empty means 100 pounds+ with full components. I like to take mine out to the garage about once a month to use air compressor to blow out dust. I am just too old and lazy to lug 100 pounds around. Sadly I am going to pass on this case.
Asus Sabertooth x99 5930k (4.5ghz) Zotac 980TI SLI 16gb Corsair DDR 4 (3000) Samsung 850 pro SSD 500gb EVGA 1000w G1 PSU 30 inch hplp3065 (2560x1600 )
|
Re: EVGA DG-8 Case
2016/06/08 06:22:22
(permalink)
Shockjockey
I want it but 50 pounds empty means 100 pounds+ with full components. I like to take mine out to the garage about once a month to use air compressor to blow out dust. I am just too old and lazy to lug 100 pounds around. Sadly I am going to pass on this case.
 If case is heavy that mean it's quality build.
|
Shockjockey
CLASSIFIED Member
- Total Posts : 4799
- Reward points : 0
- Joined: 2006/11/29 14:24:02
- Location: OHIO
- Status: offline
- Ribbons : 17
Re: EVGA DG-8 Case
2016/06/08 06:26:31
(permalink)
Vlada011
Shockjockey
I want it but 50 pounds empty means 100 pounds+ with full components. I like to take mine out to the garage about once a month to use air compressor to blow out dust. I am just too old and lazy to lug 100 pounds around. Sadly I am going to pass on this case.
If case is heavy that mean it's quality build.
LOL 
Asus Sabertooth x99 5930k (4.5ghz) Zotac 980TI SLI 16gb Corsair DDR 4 (3000) Samsung 850 pro SSD 500gb EVGA 1000w G1 PSU 30 inch hplp3065 (2560x1600 )
|
Slimshiesty
CLASSIFIED Member
- Total Posts : 2407
- Reward points : 0
- Joined: 2007/12/08 11:29:43
- Location: Colorado Springs, Co.
- Status: offline
- Ribbons : 4
Re: EVGA DG-8 Case
2016/06/09 10:31:46
(permalink)
As of this post.. appx 22.5 hours till preorder.
Good luck to all, hope we can all get a preorder.
CPU Intel i7 6700K @ 4.0 GHz MB MSI Z170A M7 GPU EVGA GTX 1070 FTW MEM Avexir ROG Red Tesla DDR4 2666 PSU EVGA Supernova 850 G2 CASE EVGA DG-87
|
tlamming
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2015/08/10 20:56:58
- Status: offline
- Ribbons : 0
Re: EVGA DG-8 Case
2016/06/10 21:15:11
(permalink)
What makes this case so heavy??
|
Slimshiesty
CLASSIFIED Member
- Total Posts : 2407
- Reward points : 0
- Joined: 2007/12/08 11:29:43
- Location: Colorado Springs, Co.
- Status: offline
- Ribbons : 4
Re: EVGA DG-8 Case
2016/06/10 21:29:22
(permalink)
tlamming
What makes this case so heavy??
Metal ! Heavy Metal ! \m/ >_< \m/
CPU Intel i7 6700K @ 4.0 GHz MB MSI Z170A M7 GPU EVGA GTX 1070 FTW MEM Avexir ROG Red Tesla DDR4 2666 PSU EVGA Supernova 850 G2 CASE EVGA DG-87
|
exilelrrp
ACX Member
- Total Posts : 259
- Reward points : 0
- Joined: 2007/02/19 11:00:23
- Location: BX INF
- Status: offline
- Ribbons : 1
Re: EVGA DG-8 Case
2016/06/13 13:59:25
(permalink)
@ first I was  all over the case, until I kept analyzing it  ...Now I'm 50/50 on this case, I like it @ the same time I don't. I can't figure out if it's the front design that reminds me of an old Zenith TV or the off side Square Bulkiness of it... 
Corsair 760T Black / Windowed * i7-4930K * Corsair AX1200W * Asus Rampage IV Black Edition * Corsair Dominator Platinum 64GB (8x8) DDR3/1600MHz * EVGA GeForce GTX 980 Ti 6GB FTW ACX 2.0 w / Backplate (2x) * Plextor 8X Blu Ray SATA w/Lightscribe (P67-2024) * Corsair H100i / Corsair Air Series SP 120mm (x4) * R6 FC * Samsung 840 Evo Series 1TB SSD * Sharp Quattron 46' LCD * Razer Blackwidow Ultimate * Logitech G500 * Cyber Sniper Tracer * SteelSeries 9H USB. 
|
Re: EVGA DG-8 Case
2016/06/13 16:01:00
(permalink)
A Half Bread Rack with rollers will work just fine.
|
Re: EVGA DG-8 Case
2016/06/13 16:01:47
(permalink)
Slimshiesty
As of this post.. appx 22.5 hours till preorder.
Good luck to all, hope we can all get a preorder.
I got my order in!
|
EVGATech_DaveB
EVGA Tech Support
- Total Posts : 4716
- Reward points : 0
- Joined: 2008/09/26 17:03:47
- Status: offline
- Ribbons : 43
Re: EVGA DG-8 Case
2016/06/13 17:47:51
(permalink)
Shockjockey
I want it but 50 pounds empty means 100 pounds+ with full components. I like to take mine out to the garage about once a month to use air compressor to blow out dust. I am just too old and lazy to lug 100 pounds around. Sadly I am going to pass on this case.
One perk on it, as I had my hands on one last Friday, is all of the panels are removable and have removable dust filter. So, depending on the size of your house, pop the covers off, remove the filters, go to the garage, blow them out with the compressor, come back in and reassemble, and that should take you 5-10 minutes, and the filters will weigh less than lugging around even the smallest mITX case, unless you let a LOT of dust build up Just something to keep in mind.
|
Slimshiesty
CLASSIFIED Member
- Total Posts : 2407
- Reward points : 0
- Joined: 2007/12/08 11:29:43
- Location: Colorado Springs, Co.
- Status: offline
- Ribbons : 4
Re: EVGA DG-8 Case
2016/06/13 18:25:14
(permalink)
EVGATech_DaveB
Shockjockey
I want it but 50 pounds empty means 100 pounds+ with full components. I like to take mine out to the garage about once a month to use air compressor to blow out dust. I am just too old and lazy to lug 100 pounds around. Sadly I am going to pass on this case.
One perk on it, as I had my hands on one last Friday, is all of the panels are removable and have removable dust filter. So, depending on the size of your house, pop the covers off, remove the filters, go to the garage, blow them out with the compressor, come back in and reassemble, and that should take you 5-10 minutes, and the filters will weigh less than lugging around even the smallest mITX case, unless you let a LOT of dust build up
Just something to keep in mind.
Since you had some time with this.. can a radiator sit above the frame for a top mounted radiator solution ?
CPU Intel i7 6700K @ 4.0 GHz MB MSI Z170A M7 GPU EVGA GTX 1070 FTW MEM Avexir ROG Red Tesla DDR4 2666 PSU EVGA Supernova 850 G2 CASE EVGA DG-87
|
Re: EVGA DG-8 Case
2016/06/14 00:09:47
(permalink)
Nice price for preorder.  EVGA build this case to present their hardware inside on best possible way. No doubt EVGA motherboard E-ATX and 2 graphic cards look sick inside. Special with waterblocks and nice cylindrical reservoir.
post edited by Vlada011 - 2016/06/14 00:13:58
|
MSim
Omnipotent Enthusiast
- Total Posts : 11895
- Reward points : 0
- Joined: 2005/05/22 23:13:30
- Location: Earth
- Status: offline
- Ribbons : 28
Re: EVGA DG-8 Case
2016/06/14 04:48:03
(permalink)
Vlada011
Nice price for preorder.
EVGA build this case to present their hardware inside on best possible way.
No doubt EVGA motherboard E-ATX and 2 graphic cards look sick inside.
Special with waterblocks and nice cylindrical reservoir.
EVGA US Store  Wait till you see how much evga is charging for shipping.  (that is from California to Oklahoma) 
post edited by MSim - 2016/06/14 04:52:08
|
Re: EVGA DG-8 Case
2016/06/14 08:34:19
(permalink)
Yes, shipping should be max 20$ in worse case.
For 3-4 days, this is really unusual price for USA territory.
Shipping is in many situation so low that people don't even notice that.
But this case for 179$ is great option at the moment. People don't need to look in every 5-10$...
That's our EVGA and I'm ready to pay little more if I like something.
They never overprice as Lian-Li example.
Lian-Li every normal case 400$+...
OK aluminium and they are one of my favorite case brands but every good case is over 400$ and every
single case have some small flaw and you need to ignore some of their not so nice solutions.
I would not even look other cases for E-ATX motherboard and 2+ graphic cards, DG-86 is great.
|
MSim
Omnipotent Enthusiast
- Total Posts : 11895
- Reward points : 0
- Joined: 2005/05/22 23:13:30
- Location: Earth
- Status: offline
- Ribbons : 28
Re: EVGA DG-8 Case
2016/06/14 09:45:26
(permalink)
My HAF-X boat anchor case (31lbs), it was like $15 (3-5days) shipping from Newegg.
|
Re: EVGA DG-8 Case
2016/06/14 10:16:42
(permalink)
|
Slimshiesty
CLASSIFIED Member
- Total Posts : 2407
- Reward points : 0
- Joined: 2007/12/08 11:29:43
- Location: Colorado Springs, Co.
- Status: offline
- Ribbons : 4
Re: EVGA DG-8 Case
2016/06/14 11:56:31
(permalink)
CPU Intel i7 6700K @ 4.0 GHz MB MSI Z170A M7 GPU EVGA GTX 1070 FTW MEM Avexir ROG Red Tesla DDR4 2666 PSU EVGA Supernova 850 G2 CASE EVGA DG-87
|
EVGATech_DaveB
EVGA Tech Support
- Total Posts : 4716
- Reward points : 0
- Joined: 2008/09/26 17:03:47
- Status: offline
- Ribbons : 43
Re: EVGA DG-8 Case
2016/06/22 09:52:55
(permalink)
Slimshiesty
EVGATech_DaveB
Shockjockey
I want it but 50 pounds empty means 100 pounds+ with full components. I like to take mine out to the garage about once a month to use air compressor to blow out dust. I am just too old and lazy to lug 100 pounds around. Sadly I am going to pass on this case.
One perk on it, as I had my hands on one last Friday, is all of the panels are removable and have removable dust filter. So, depending on the size of your house, pop the covers off, remove the filters, go to the garage, blow them out with the compressor, come back in and reassemble, and that should take you 5-10 minutes, and the filters will weigh less than lugging around even the smallest mITX case, unless you let a LOT of dust build up
Just something to keep in mind.
Since you had some time with this.. can a radiator sit above the frame for a top mounted radiator solution ?
Sorry about the delay in reply, but yes it can support a radiator on the top and in the front. In the top there is framing to mount the radiator to, much like many other cases, mount similarly to my old HAF932, mounting it to the bottom of the upper framing. You can mount it on top, however some radiators might have a hard time getting hoses back through and into the case.
|
delpy71
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2013/12/05 02:24:11
- Status: offline
- Ribbons : 0
Re: EVGA DG-8 Case
2016/07/03 01:47:49
(permalink)
Vlada011
EVGA Power Link will move all of these VGA Power cables to the motherboard tray.
They will be visible only 2-3cm and only if you look on them... from front side like they are not connected at all.
EVGA Power Link is one of smartest tool I saw in last few years for PC...
I think they should become part of every EVGA Graphic Card Package next year.
You see on pictures... only little peace as 24pin from VGA Power cables will be visible.
I would love to know what that cooling solution is from EVGA ,
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 4440
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Mid-Atlantic, USA
- Status: offline
- Ribbons : 44
Re: EVGA DG-8 Case
2016/07/03 11:45:00
(permalink)
EVGATech_DaveB
Slimshiesty
EVGATech_DaveB
Shockjockey
I want it but 50 pounds empty means 100 pounds+ with full components. I like to take mine out to the garage about once a month to use air compressor to blow out dust. I am just too old and lazy to lug 100 pounds around. Sadly I am going to pass on this case.
One perk on it, as I had my hands on one last Friday, is all of the panels are removable and have removable dust filter. So, depending on the size of your house, pop the covers off, remove the filters, go to the garage, blow them out with the compressor, come back in and reassemble, and that should take you 5-10 minutes, and the filters will weigh less than lugging around even the smallest mITX case, unless you let a LOT of dust build up
Just something to keep in mind.
Since you had some time with this.. can a radiator sit above the frame for a top mounted radiator solution ?
Sorry about the delay in reply, but yes it can support a radiator on the top and in the front. In the top there is framing to mount the radiator to, much like many other cases, mount similarly to my old HAF932, mounting it to the bottom of the upper framing. You can mount it on top, however some radiators might have a hard time getting hoses back through and into the case.
Case is less than 44 lbs (43.2 lbs to be exact) ---- [ 51.1 lbs is gross (aka) shipping weight with packing materials ] http://www.evga.com/Products/Product.aspx?pn=100-E1-1236-K0
1) ASUS Z97-WS, i7-4790K@4.9GHz, 2-Way-SLI - EVGA GTX Titan X SC - EK block/plate, Custom loop, 32GB GSkill Ripjaws DDR3-2400, Samsumg Pro 850 SSD, 2-2TB WD Black, Phanteks Primo Case, Win 10 Pro 64bit, 4K Acer XB280HK monitor, EVGA 1600 P2 Supernova PSU, Fire Strike 1.1 = 21,842 2) EVGA X99 Classified, I7-5960X, 2- Titan X Pascal, 32GB GSkill Ripjaws DDR4-3000, Intel NVMe PCIe 750 SSD, Win10 Pro,PSU EVGA 1200 P2 Folding 2.5M PPD Affiliate code 05MLLDCG6B 
|
sawzall2k6
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2010/09/27 14:54:24
- Status: offline
- Ribbons : 0
Re: EVGA DG-8 Case
2016/08/18 08:21:28
(permalink)
This is a nice case, but why evga did you not put long enough cables in it for the front panel. Some won't even reach my x99ftw without stringing them through the middle of case. I'm installing a hard line water cooling system and want it to look nice and now I have to buy extention so I can hide cable. You didn't think this one through very good. Also, what a mess this bundle of wires behind front panel is. Poor IMO for the money
EVGA P67 FTW I7-2600k G. Skill Sniper 4gb x 2 1.25v EVGA GTX 470sc SLI IN Win - Dragon Full Case
|
