EVGA

EVGA 650 P2 mounting question

Author
Post
Essentials Only Full Version
FattysGoneWild
CLASSIFIED Member
  • Total Posts : 2660
  • Reward points : 0
  • Joined: 2011/04/24 18:45:43
  • Location: KFC
  • Status: offline
  • Ribbons : 3
2016/06/13 14:59:34 (permalink)
Picture is not my pc. Someone else that has the same pc and just the bigger version of the psu wattage wise. Size wise they are the same. They have the EVGA 750 P2. Any ways. The bottom 2 holes align and mount properly. Its the top 2 holes that do not align. Is it safe and okay for what that user done? They just put the 2 screws through the mesh part and called it a day. Apparently it secures it all the same and keeps it tight just as if you used the actual 2 mounting holes up top of the psu.
 


HP Omen 880-160se custom ordered
OS: Windows 10 64 bit
MOBO: HP Tampa2
CPU: Intel i7 8700k @4.8GHz
RAM: 32GB DDR4 2400
GPU: PNY XLR8 RTX 3080
PSU: Delta 750w 80 Plus Platinum 
NVMe M.2 SSD: Samsung 512GB MZVLW512HMJP
SSD: 250GB Samsung 860 EVO
HDD: 2TB Seagate Barracuda ST2000DM001
Sound: Logitech Z623 THX 2.1 Speakers
Monitor: Dell S2716DG 2560x1440 @144Hz G-Sync calibrated with ColorMunki Display
Keyboard: HP Omen 1100
Mouse: HP Omen 600
 
 
#1

10 Replies Related Threads
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: EVGA 650 P2 mounting question 2016/06/13 15:52:46 (permalink)
    Looks like a Dell/HP
    Drill out the two Red Circles below. 
     
    post edited by bcavnaugh - 2016/06/13 16:31:10

    Attached Image(s)


    Associate Code: 9E88QK5L7811G3H


     
    #2
    FattysGoneWild
    CLASSIFIED Member
    • Total Posts : 2660
    • Reward points : 0
    • Joined: 2011/04/24 18:45:43
    • Location: KFC
    • Status: offline
    • Ribbons : 3
    Re: EVGA 650 P2 mounting question 2016/06/13 16:07:01 (permalink)
    EVGATech_AndrewA
    What kind of case it the PC? Is this a pre-built machine?


     
    Yes it is. Its a HP Envy Phoenix desktop to be exact. As you can see. The bottom 2 fit perfectly fine. Its just the top 2 that do not. Hence those 2 screws where the OEM psu fits are screwed into the mesh part of the EVGA psu. Which I am not sure would be safe or not. I have talked to that party through pm and they assure me it works fine and the psu is completely in place. I just want a second opinion and hearing from some one at EVGA is a big plus as well. 
     
     
    post edited by FattysGoneWild - 2016/06/13 16:19:14

    Attached Image(s)


    HP Omen 880-160se custom ordered
    OS: Windows 10 64 bit
    MOBO: HP Tampa2
    CPU: Intel i7 8700k @4.8GHz
    RAM: 32GB DDR4 2400
    GPU: PNY XLR8 RTX 3080
    PSU: Delta 750w 80 Plus Platinum 
    NVMe M.2 SSD: Samsung 512GB MZVLW512HMJP
    SSD: 250GB Samsung 860 EVO
    HDD: 2TB Seagate Barracuda ST2000DM001
    Sound: Logitech Z623 THX 2.1 Speakers
    Monitor: Dell S2716DG 2560x1440 @144Hz G-Sync calibrated with ColorMunki Display
    Keyboard: HP Omen 1100
    Mouse: HP Omen 600
     
     
    #3
    FattysGoneWild
    CLASSIFIED Member
    • Total Posts : 2660
    • Reward points : 0
    • Joined: 2011/04/24 18:45:43
    • Location: KFC
    • Status: offline
    • Ribbons : 3
    Re: EVGA 650 P2 mounting question 2016/06/15 12:10:58 (permalink)
    Soooo what is the verdict? Is it safe and okay to do that? 

    HP Omen 880-160se custom ordered
    OS: Windows 10 64 bit
    MOBO: HP Tampa2
    CPU: Intel i7 8700k @4.8GHz
    RAM: 32GB DDR4 2400
    GPU: PNY XLR8 RTX 3080
    PSU: Delta 750w 80 Plus Platinum 
    NVMe M.2 SSD: Samsung 512GB MZVLW512HMJP
    SSD: 250GB Samsung 860 EVO
    HDD: 2TB Seagate Barracuda ST2000DM001
    Sound: Logitech Z623 THX 2.1 Speakers
    Monitor: Dell S2716DG 2560x1440 @144Hz G-Sync calibrated with ColorMunki Display
    Keyboard: HP Omen 1100
    Mouse: HP Omen 600
     
     
    #4
    FattysGoneWild
    CLASSIFIED Member
    • Total Posts : 2660
    • Reward points : 0
    • Joined: 2011/04/24 18:45:43
    • Location: KFC
    • Status: offline
    • Ribbons : 3
    Re: EVGA 650 P2 mounting question 2016/06/22 00:01:19 (permalink)
    The holes lined up perfectly fine btw.  My only complaint. I hate the cpu cable with the dual 8pins. Ugh. I would have got the 750w unit instead had I known they give 2 different cables. Both being single split 8 pin connectors. Maybe someone at EVGA can send me an extra if you have one?!?!?  
    post edited by FattysGoneWild - 2016/06/22 00:03:37

    HP Omen 880-160se custom ordered
    OS: Windows 10 64 bit
    MOBO: HP Tampa2
    CPU: Intel i7 8700k @4.8GHz
    RAM: 32GB DDR4 2400
    GPU: PNY XLR8 RTX 3080
    PSU: Delta 750w 80 Plus Platinum 
    NVMe M.2 SSD: Samsung 512GB MZVLW512HMJP
    SSD: 250GB Samsung 860 EVO
    HDD: 2TB Seagate Barracuda ST2000DM001
    Sound: Logitech Z623 THX 2.1 Speakers
    Monitor: Dell S2716DG 2560x1440 @144Hz G-Sync calibrated with ColorMunki Display
    Keyboard: HP Omen 1100
    Mouse: HP Omen 600
     
     
    #5
    Vlada011
    Omnipotent Enthusiast
    • Total Posts : 10257
    • Reward points : 0
    • Joined: 2012/03/25 00:14:05
    • Location: Belgrade-Serbia
    • Status: offline
    • Ribbons : 11
    Re: EVGA 650 P2 mounting question 2016/06/22 09:14:17 (permalink)
    On all other newer models 8pin CPU is 4+4 pin because compatibility with all motherboards.
    I don't know why ASUS example use 8+4 pin instead 8+8pin for CPU. But if you want to connect EVGA PSU with some ROG E-ATX motherboards than you need one CPU power cable with 4+4 pin. And other connector stay on side like idiot.
    That's weird decision special because ASUS use 8+8 pin even on mATX board WS and on E-ATX board WS, but on ROG 8+4 pin.
    Why small WS have 8+8pin and motherboard where people usually OC i7-6950X and i7-5960X have 8+4pin???
    post edited by Vlada011 - 2016/06/22 09:16:37

    i7-5820K 4.5GHz/RVE10-EK Monoblock/Dominator Platinum 2666/ASUS GTX1080Ti Poseidon/SBZxR /Samsung 970 EVO PLus 1TB/850 EVO 1TB /EVGA 1200P2/Lian Li PC-O11WXC/EK XRES D5 Revo 100 Glass/Coolstream PE360-Noctua NF-A12x25 PWM x3
    http://www.evga.com
    http://www.intel.com
    http://www.nvidia.com
    https://watercool.de
    http://www.lian-li.com
    https://www.youtube.com/watch?v=PHMun5xiRe0
     
    https://xdevs.com/guide/2080ti_kpe/#intro
    https://www.evga.com/articles/01386/evga-sr-3-dark/
     
     
     

     
     
    #6
    FattysGoneWild
    CLASSIFIED Member
    • Total Posts : 2660
    • Reward points : 0
    • Joined: 2011/04/24 18:45:43
    • Location: KFC
    • Status: offline
    • Ribbons : 3
    Re: EVGA 650 P2 mounting question 2016/07/24 22:24:14 (permalink)
    EVGA,
     
    Is there a way I could get my hands on the cpu cable from the 750w P2 version? I would really prefer to use that. Like I said. I should have looked into it more and shooting myself for not getting that version instead. I did not want to return the 650 P2 though since its working perfectly fine. 

    HP Omen 880-160se custom ordered
    OS: Windows 10 64 bit
    MOBO: HP Tampa2
    CPU: Intel i7 8700k @4.8GHz
    RAM: 32GB DDR4 2400
    GPU: PNY XLR8 RTX 3080
    PSU: Delta 750w 80 Plus Platinum 
    NVMe M.2 SSD: Samsung 512GB MZVLW512HMJP
    SSD: 250GB Samsung 860 EVO
    HDD: 2TB Seagate Barracuda ST2000DM001
    Sound: Logitech Z623 THX 2.1 Speakers
    Monitor: Dell S2716DG 2560x1440 @144Hz G-Sync calibrated with ColorMunki Display
    Keyboard: HP Omen 1100
    Mouse: HP Omen 600
     
     
    #7
    ty_ger07
    Insert Custom Title Here
    • Total Posts : 21171
    • Reward points : 0
    • Joined: 2008/04/10 23:48:15
    • Location: traveler
    • Status: offline
    • Ribbons : 270
    Re: EVGA 650 P2 mounting question 2016/07/25 01:09:06 (permalink)
    What is the difference?  To me, the CPU cable for the 750W P2 looks the same as the CPU cable for the 650W P2.

    ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
    My EVGA Score: 1546 • Zero Associates Points • I don't shill
    #8
    RchUncleSkeleton
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2016/05/05 21:09:19
    • Location: Hyrule
    • Status: offline
    • Ribbons : 0
    Re: EVGA 650 P2 mounting question 2016/07/25 01:50:23 (permalink)
    ty_ger07
    What is the difference?  To me, the CPU cable for the 750W P2 looks the same as the CPU cable for the 650W P2.


    The 650 comes with a single cable for the CPU, which has 2 connectors, daisy-chained at the motherboard side, with 1 4+4 and a full 8 pin. The 750 has two individual cables with 4+4 on both. If you check out the , he mentions this. Not sure if the 750 cable would be compatible with the 650, though.
     
    I'd say, just tie the daisy-chained connector back with a zip tie or velcro tie.

    With Great Power, Comes Great Mistakes
    #9
    mike406
    SSC Member
    • Total Posts : 904
    • Reward points : 0
    • Joined: 2015/02/21 18:17:33
    • Status: offline
    • Ribbons : 13
    Re: EVGA 650 P2 mounting question 2016/07/26 23:24:54 (permalink)
    RchUncleSkeleton
     
    The 650 comes with a single cable for the CPU, which has 2 connectors, daisy-chained at the motherboard side, with 1 4+4 and a full 8 pin. The 750 has two individual cables with 4+4 on both. If you check out the , he mentions this. Not sure if the 750 cable would be compatible with the 650, though.
     
    I'd say, just tie the daisy-chained connector back with a zip tie or velcro tie.




    As far as I know the G2, P2 and T2 cables are all interchangeable no matter the wattage as the custom sleeved cables EVGA sells would indicate: http://www.evga.com/Produ...aspx?pn=100-CK-1300-B9]
    So he could source a cable from the 750 G2/P2/T2 and be good to go.
    post edited by mike406 - 2016/07/26 23:27:19

           Associate Code: 6KIMUJ06W8WFDR5 (5-10% off your purchase)              




    #10
    FattysGoneWild
    CLASSIFIED Member
    • Total Posts : 2660
    • Reward points : 0
    • Joined: 2011/04/24 18:45:43
    • Location: KFC
    • Status: offline
    • Ribbons : 3
    Re: EVGA 650 P2 mounting question 2016/07/27 21:25:28 (permalink)
    I am digging that sleeve option. Those are really nice. I might have to get those. 

    HP Omen 880-160se custom ordered
    OS: Windows 10 64 bit
    MOBO: HP Tampa2
    CPU: Intel i7 8700k @4.8GHz
    RAM: 32GB DDR4 2400
    GPU: PNY XLR8 RTX 3080
    PSU: Delta 750w 80 Plus Platinum 
    NVMe M.2 SSD: Samsung 512GB MZVLW512HMJP
    SSD: 250GB Samsung 860 EVO
    HDD: 2TB Seagate Barracuda ST2000DM001
    Sound: Logitech Z623 THX 2.1 Speakers
    Monitor: Dell S2716DG 2560x1440 @144Hz G-Sync calibrated with ColorMunki Display
    Keyboard: HP Omen 1100
    Mouse: HP Omen 600
     
     
    #11
    Jump to:
  • Back to Mobile