EVGA

ETA for 980 Classified?

Page: << < ..11121314 Showing page 14 of 14
Author
Post
Essentials Only Full Version
WebTourist
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2013/12/20 04:41:35
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2014/11/13 15:03:31 (permalink)
the 780/780ti classy EK water block is fit to 980 classy
some holes is not in the same place but it's ok





#391
hallowen
CLASSIFIED ULTRA Member
  • Total Posts : 5644
  • Reward points : 0
  • Joined: 2008/06/18 15:38:00
  • Location: In a Galaxy Far, Far Away...
  • Status: offline
  • Ribbons : 14
Re: ETA for 980 Classified? 2014/11/13 15:16:00 (permalink)
Thanks for the Info,
 
I KNEW the EK-FC780 Classy would probably Work on the EVGA GTX 980 Classified!
 
So Much for having to Buy New Hundred $+ FC water blocks again!

ASUS: Rampage VI Extreme | i9-7940X | 2X RTX 2080 Ti Kingpin SLI | 32GB DDR4 3200MHz Memory - SAGER: NP9870-G | i7-6700K | GTX 980M 8GB | 64GB DDR4 | 950 PRO M.2 512GB | 17.3 QHD 120Hz Matte G-Sync | Prema bios - EVOC Premamod:  P870TM1 | i9-9900K-LM | RTX 2080N 8GB | Modded Vapor Chamber | 32GB 3000MHz Ripjaws | 960 EVO M.2 1TB | 17.3 3K QHD 120Hz Matte G-Sync | Intel 8265 -
 
 
#392
143miah
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2011/02/12 00:43:30
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2014/11/13 15:55:58 (permalink)
WebTourist
the 780/780ti classy EK water block is fit to 980 classy
some holes is not in the same place but it's ok







Are those the only two holes that line up?

Also can you post what Temps you're getting?
#393
hallowen
CLASSIFIED ULTRA Member
  • Total Posts : 5644
  • Reward points : 0
  • Joined: 2008/06/18 15:38:00
  • Location: In a Galaxy Far, Far Away...
  • Status: offline
  • Ribbons : 14
Re: ETA for 980 Classified? 2014/11/13 16:23:26 (permalink)
143miah
WebTourist
the 780/780ti classy EK water block is fit to 980 classy
some holes is not in the same place but it's ok







Are those the only two holes that line up?

Also can you post what Temps you're getting?

I have looked at mine and Those two (outlined in Red) and another one are the only ones I see, But the Block Will Work!
post edited by hallowen - 2014/11/13 16:37:18

ASUS: Rampage VI Extreme | i9-7940X | 2X RTX 2080 Ti Kingpin SLI | 32GB DDR4 3200MHz Memory - SAGER: NP9870-G | i7-6700K | GTX 980M 8GB | 64GB DDR4 | 950 PRO M.2 512GB | 17.3 QHD 120Hz Matte G-Sync | Prema bios - EVOC Premamod:  P870TM1 | i9-9900K-LM | RTX 2080N 8GB | Modded Vapor Chamber | 32GB 3000MHz Ripjaws | 960 EVO M.2 1TB | 17.3 3K QHD 120Hz Matte G-Sync | Intel 8265 -
 
 
#394
iamSneaky
iCX Member
  • Total Posts : 444
  • Reward points : 0
  • Joined: 2012/04/11 01:05:16
  • Location: Australia
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2014/11/13 19:22:44 (permalink)
OH man .. this is awesome news about the Blocks.
What about the memory contacts on the block though? 780/780Ti 3gb vs 4GB on 980 Classy,
do they line up?

SS07:
Lian Li O11 Dynamic XL|i9 10900K [SP 98][Bykski FR-CU-RA-V2 CPU Block]|ASUS ROG Maximus XIII Extreme
EVGA RTX 3080 FTW3 Ultra [Bykski Block]|Galax HoF OC Lab Edition 4600mhz|Alienware AW2721D
EVGA Supernova P2 1600

 
Elite ID: BJBC3RMQSBKAR2ALRHN
 
#395
WebTourist
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2013/12/20 04:41:35
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2014/11/13 22:49:47 (permalink)
the block does not fit 100% .
I found some problems and the board bending but can be used.
be careful
 
I will post more pictures at the end of the day
 
#396
cursed_prophet2012
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2012/11/28 18:56:08
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2015/01/15 05:02:12 (permalink)
hey guys any update on the blocks fitting the 980 classy, i have 2 blocks sitting here waiting to be fitted but before undoing everything a confirmation on block would be awesome, also i have evga 780 classy backplate will this also fit ?im guessing yes if the block fits lol :)
 
keep us posted guys:)

i7-4790K overclocked to 4.8ghz on water
Asus Z87 Maximus VII EXTREME
(used to own)3X Sli EVGA GTX 980 CLASSIFIED 4GB
EK Water cooling Loop 1220mm rads
Dominator Platinum 16GB @ 2666mhz oc
EVGA 1600 P2 Platinum
Samsung 850 500GB (boot/games)
Samsung 840 250GB (games)
WD caviar Black 2TB
Seagate Barracuda 3TB (porn)
Corsair Obsidian 900D
(x3) Asus VG278H 144HZ (De-Bezzeled)
#397
WebTourist
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2013/12/20 04:41:35
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2015/01/15 09:52:54 (permalink)
780 classy backplate will NOT fit!
#398
cursed_prophet2012
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2012/11/28 18:56:08
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2015/01/18 02:45:05 (permalink)
hey webtourist :)
 
just wandering if there any certain change we need to be aware of when swapping blocks,  for ex , new length screws, or washers we need? or do they just fit as is ?
 
thanks again :)

i7-4790K overclocked to 4.8ghz on water
Asus Z87 Maximus VII EXTREME
(used to own)3X Sli EVGA GTX 980 CLASSIFIED 4GB
EK Water cooling Loop 1220mm rads
Dominator Platinum 16GB @ 2666mhz oc
EVGA 1600 P2 Platinum
Samsung 850 500GB (boot/games)
Samsung 840 250GB (games)
WD caviar Black 2TB
Seagate Barracuda 3TB (porn)
Corsair Obsidian 900D
(x3) Asus VG278H 144HZ (De-Bezzeled)
#399
WebTourist
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2013/12/20 04:41:35
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2015/01/18 08:28:04 (permalink)
cursed_prophet2012
 
just wandering if there any certain change we need to be aware of when swapping blocks,  for ex , new length screws, or washers we need? or do they just fit as is ?
 



board bending but can be used
 
The problem is here:

 
 
 

 
 
#400
Shanester44
New Member
  • Total Posts : 76
  • Reward points : 0
  • Joined: 2014/01/22 18:00:41
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2015/01/18 10:58:17 (permalink)
Easy on the paste there my friend.

 


 
 
#401
Stay Puft
iCX Member
  • Total Posts : 286
  • Reward points : 0
  • Joined: 2013/04/22 13:25:17
  • Status: offline
  • Ribbons : 1
Re: ETA for 980 Classified? 2015/01/18 19:48:38 (permalink)
WebTourist
cursed_prophet2012
 
just wandering if there any certain change we need to be aware of when swapping blocks,  for ex , new length screws, or washers we need? or do they just fit as is ?
 



board bending but can be used
 
The problem is here:

 
 
 

 
 




Agreed. WAY too much paste. Just use a pea size drop in the center of the die 
#402
cursed_prophet2012
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2012/11/28 18:56:08
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2015/01/23 04:50:13 (permalink)
hey guys, sorry for the late reply, work is hectic atm, just want to say thank you to everyones input here, :)
 
i have 3 780 ti's with blocks so a lot of money i can save if i successfully fit the blocks :)!!!!
also really appreciate the heads up on bending and etc, im just waiting on an sli tube fitting and also thermal pads, oh which also reminds me, is it ok if i use same size thermal pads as what came with ek block? 0.5 and the 1mm pads?
 
could you please let us know what size pads go where , or should we just follow "ekfc780 classy" instructions again ?
 
kind regards
 
 

i7-4790K overclocked to 4.8ghz on water
Asus Z87 Maximus VII EXTREME
(used to own)3X Sli EVGA GTX 980 CLASSIFIED 4GB
EK Water cooling Loop 1220mm rads
Dominator Platinum 16GB @ 2666mhz oc
EVGA 1600 P2 Platinum
Samsung 850 500GB (boot/games)
Samsung 840 250GB (games)
WD caviar Black 2TB
Seagate Barracuda 3TB (porn)
Corsair Obsidian 900D
(x3) Asus VG278H 144HZ (De-Bezzeled)
#403
cerealkeller
Superclocked Member
  • Total Posts : 201
  • Reward points : 0
  • Joined: 2008/10/01 00:44:13
  • Status: offline
  • Ribbons : 0
Re: ETA for 980 Classified? 2015/02/02 16:08:09 (permalink)
Shanester44
Easy on the paste there my friend.


lol, that was my reaction

Intel i9 9900K 5.4 GHz Koolance CPU400 Water Block
EVGA Z390 Dark
32 GB G Skill Trident 4000 MHz G Skill RAM Cooler
EVGA RTX 3090 FTW3 Ultra (Optimus Block coming)
Samsung 960 Evo 1 TB
Seagate Fire Cuda 1 TB
EVGA 1600 P2 PSU
Pioneer BD-RW
Thermaltake Core W200 Super Tower
2 x Alphacool Nexxus Monsta 480x90mm Rads, 280x65mm Phobya Rad, 240x55mm Koolance Rad
2 x Koolance PMP450S 24v Pumps, 2 x 770ml Koolance Reservoirs, 12 x Corsair ML140s, 4 x Corsair SP120s, 8 x Corsair HD120s, 8 x Cooler Master Sickle Flow 120s
Windows 10
#404
Page: << < ..11121314 Showing page 14 of 14
Jump to:
  • Back to Mobile