K6000 block looks sexy.
 
Derick, quick question. Not sure if you can even find this info, but do you have any idea where to get the screws and washers etc for this block? 
 

 
(That was my first system under WC)
 
I still have the card and the block. It's an EK 295 Dual PCB nickle/acetal block and I'm missing all of the mounting hardware. 
 
(Sorry if this should have been a PM, I wasn't sure if that was okay to PM you here or not)

Halo,
 
M2.5x8 DIN7985 (x23)


Distancer fi 6/3 x 2,5 Acetal (x23)
 
We had this kit:  http://www.ekwb.com/shop/mounting-mechanism-fc295-gtx.html
 
What I would do is contact FrozenCPU. Tell them you need this kit (as well as the screw and distancer info) and say this is what EK Support told me I needed, and they should be able to assemble everything you need.

Excellent, thank you!!!

EK_Derik,  if you can,  please thank Igor for me...  This morning at 0500, I received a shipment notification.   This afternoon,  I received my order with my classy blocks and all.   :-D

I have been thinking about the loop as well.   I may consider ordering a block and another radiator and adding in the CPU,  then just have a dual pump/res setup so that if one gives out,  the other will take over.   I had already ordered an X60 and really don't want to get rid of it,  as I haven't even opened it yet,  but it probably makes the most sense overall.   I have been been over complicating everything.
 
My main purpose behind the individual loops,  in the easiest explanation possible,  is for future repairs,  if need be.  If I can remove the one loop and card,  it seems easier than draining a full system and then removing everything to get to one card.  
 
***edit*** Going to make use of Koolance no spill quick connects for easy removal and replacement. 

Scarlet-Tech

EK_Derick
Depending on the configuration of your motherboard/pci-e slot spacing you can choose one of our FC-Terminals http://www.ekwb.com/shop/blocks/vga-blocks/multiple-block-connectivity/fc-terminals.html. However this will limit the GPUs to be in the same loop.

Would you suggest the parallel Ek-fc terminal or the series? I have an idea of how I am going to run everything, and I am standing by for the case to get here.

I would suggest serial, but this is a personal preference. I did serial because of the flow being set. Not sure if either make a difference with temperature. Mine runs at great temps, 30's during benchmarking, 40's during folding.

Scarlet-Tech

Grey_Beard

Scarlet-Tech

EK_Derick
Depending on the configuration of your motherboard/pci-e slot spacing you can choose one of our FC-Terminals http://www.ekwb.com/shop/blocks/vga-blocks/multiple-block-connectivity/fc-terminals.html. However this will limit the GPUs to be in the same loop.

Would you suggest the parallel Ek-fc terminal or the series? I have an idea of how I am going to run everything, and I am standing by for the case to get here.

I would suggest serial, but this is a personal preference. I did serial because of the flow being set. Not sure if either make a difference with temperature. Mine runs at great temps, 30's during benchmarking, 40's during folding.

Thanks for the suggestion. I found that FrozenCPU sells the parallel, but I can't seem to find the serial. I will get the Parallel until I can find somewhere that will ship the serial to me. I will have quick disconnects, so I will be able to pull them with minimum fluid loss.

I got my serial bridge from them.  They do have a good relationship with EK and can get items pretty quickly.  I got my motherboard block in only a few days.  The 90 degree fittings I ordered have taken much longer than I would like, but I will not post my pictures until I have that last piece as my loop is a bit messy without them.  The parallel may work fine.  Never tried one, so I cannot say.

Derrick,
I ordered this item "EK CSQ G1/4 Thread 90° Fitting Adapter - Black (EK-CSQ Adapter 90° G1/4 Black)" from FrozenCPU on January 18th.  It seems this items has not been produced yet.  I have a number of things on this order that are being delayed by the arrival of this item.  There has never this long of a delay with an item from EK before.  Can you assist me in getting this item or at least finding out an ETA for me.  Thanks in advance for any information related to this.  I really need to finish my rig and the order, specifically these fittings, are the final pieces of my water loop.

EK_Derick
Hi Grey_Beard,
 
Apologies for the late reply, I've had a bit of a hectic week, not in a good way sadly. Our fittings are one of the few products that we sadly do not produce in Slovenia and the wait between orders is sometimes quite large, especially with black I've noticed. I will check into when the next order is due and will be shipped to FrozenCPU. 

Thanks Derrick.  I will await your response.

Would you happen to know which Canadian retailers sell EK parts? Im looking to get the LGA 2011 mounting kit for the Supreme HF water block, but dont want to pay duty when its coming from the US.

question EK_Derick.
YOU HAVE PROVIDED AN full waterblock like maximus for 87 STINGER Z PLEASE

Derick I can't recall if I asked and I only have a minute, but are there any full board blocks for the Sabertooth X79?
 
I haven't been able to find one so far.

((It's been talked about but other projects are more of a priority currently.))                 I look forward to the arrival of this block

Sorry for the delay, yes it is compatible.

Derrick is there anyway to still get the Copper/Plexi Supremacy with the circles on it???  That is my favorite design and I am upset that many places have discontinued it!!!  Is there an H30 kit that includes the supremacy?  I don't care how or how much but I want the supremacy!