Post your pics below in 1 easy to find thread will update mine on Monday

http://forums.evga.com/EV...-m2531891.aspx#2531891

Here is how my case came In today this is unacceptable !

http://img.photobucket.co...image_zpstw0brk7x.jpeg

Hope there is insurance envolved if the case is damaged

http://www.modsrigs.com/detail.aspx?BuildID=35817

I left the fans inside the case below the radiator blowing out instead of outside the case in the upper compartment I plan on push / pull in the future is the reason

I am running a h110i GTX 280mm and the radiator is flush to the top , but I still have some room below the fan and the top of the motherboard about a fingertip width

Chris21010
as long as you do not have fans on the bottom of your rad 60mm is the max on top.

You could mount the fans in the top to save room
i guess

Here's a pic of the distance from the fan to the motherboard

https://s3.postimg.org/c0zqvmq03/image.jpg

Also looks like the DG-87 has an issue with 24pin length? I may need to order custom extended 24pin for my build. I saw manbearpig ran it on front side of the case, and sourmonkey you were able to run yours along the back?

Negative I routed mine like manbearpig and went to the front but I hid most of it in the basement and behind the Evga plastic shield I literally liked about a inch or less from being able to secure it may be able to run it with the ssd tray behind the bottom gromet removed but I'm using that for my boot drive

I'm running a Evga 750G2 p/s

chaosminionx
With room to spare, or just barely? In terms of how much cable you had left after connecting.

Actually, I should add more details. >_< With a EVGA SuperNOVA 1000 G2 Power Supply and both basement HDD towers removed, I have plenty of wiggle room with the 24 pin going behind the tray. Tonight I will take some pictures to show.

So it looks like you have what, like 2-3" of 24pin cable left? I see your 24pin connects horizontally, instead of vertically. I am wondering if I will have enough slack to get some cable combs in there, I might have to order a 700mm cable.


EDIT: Also, my Corsair AX1200i probably will have more cable too, since my 24pin is on the right hand side, looks like the EVGA ones are on the left, so it takes that much more distance to reach the motherboard.

Yeah, 600mm is pretty standard for ATX, guess I will have to see what I have to work with, would like to dodge having to spend $50 on a new 700mm ATX to get hte look I want haha.

Here is my Rig, DG-86 built today. The 24 Mobo pin for me had to be routed to the front on a 750 Watt EVGA, Gold I think. Another weird problem I am having is trying to plug the molex fan connector into a molex power wire Causes the PSU to immediately stop, and will only start for brief pauses and remain off until I reset the power or CMOS. Ill try a different molex wire and in a different PSU port later, this took me about 4 hours to do and I'm wiped.
 
http://imgur.com/a/JWddG 
 
Specs:
I7-5820k @ 4.2ghz (stock 3.30)
EVGA 980Ti Classified (Max OC is 1497mhz)
48 Gb Crucial 2133 mhz DDR4 ram (For 4k Video editing when needed)
Main Drive: 512gb Crucial SSD
Storage: 750gb WD green, 2TB WD black
Motherboard as pictured, MSI SLi X99s
Main Screen is an AOC G-sync 144hz 1080p monitor. Ive honestly not noticed a difference in anything, even at low fps with g-sync on or off, but the 144 fps is really really nice

Pic 2: I've installed the psu, mobo, water cooler, radiator, etc etc

Pic 4: I called it a night at this point.  I set up a dual M.2 raid. I installed a fresh version of Win 10.  I updated my drivers.  I downloaded some software.  Really all I have left to do is re-arrange my cables, and figure out how I want to configure my LEDs

CASE: cmon man, really?
GPU: EVGA gtx 1080 FTW (not the FE clocked version lol)
PSU: evga supernova 750
CPU: i7 6700k
MOBO: MSI Z170A Xgaming Titanium Edition
COOLER: Kraken x61
RAM: Corsair Vengence LED 3000 x32gb
OS SSD: 2x raid-0 Samsung 950pro M.2
Storage HDDS: 3x 3gb toshiba spinners