wxchaser
Superclocked Member
- Total Posts : 156
- Reward points : 0
- Joined: 2010/02/08 15:07:52
- Status: offline
- Ribbons : 1
|
VegetaCreeper
CLASSIFIED Member
- Total Posts : 2242
- Reward points : 0
- Joined: 2007/08/04 14:49:14
- Status: offline
- Ribbons : 4
Re:*Club i7 Stability Continuation*
2010/02/25 12:35:45
(permalink)
 I don't know a ton about OC'ing yet, but that looks pretty dang impressive!!
3 X U2414h monitors in triple Nvidia Surround Thermaltake Level 10 Black GT Asus Maximus Hero Corsair HX 750 PSU i5 4770K (overclocked 4.2 GHZ) Noctua NH-D15 Cooler G Skill - 16 GB DDR3 Dual Channel 1600 MHZ Ram EVGA GTX 1080 ACX 3.0 Western Digital Velociraptor 600 GB / 6.0 GB second 4 x 200 MM fans - 1 x 140 mm fan - 1 x 120 mm fan "Dodgin and Weavin, Dodgin and Weavin" Evga Affiliate code: 9HNPZCCZDO 
|
Re:*Club i7 Stability Continuation*
2010/02/25 13:44:18
(permalink)
wxchaser...Nice to see another 3845b in the forum!
HAF 922 Win7 64 bit Classified 760 980X @ 4.5 24/7 Antec TPQ-1200 psu Evga GTX 470 TRI SLI Prolimatech Megahalem Mushkin Redlines 2000Mhz Intel X-25m G2 160Gb SSD Raptor 150 gb for storage 32" Toshiba 1920 x 1080p
|
wxchaser
Superclocked Member
- Total Posts : 156
- Reward points : 0
- Joined: 2010/02/08 15:07:52
- Status: offline
- Ribbons : 1
Re:*Club i7 Stability Continuation*
2010/02/25 13:55:23
(permalink)
expedision
wxchaser...Nice to see another 3845b in the forum!
Thanks bud - I find this chip loves low voltage. Just installed an H50 yesterday with push/pull using 38mm Ultra Kaze and 25 mm Corsair fan (the fans were too thick for me to install both Ultra Kaze's). Used AS5 instead of the Shin Etsu on the H50 and still burning in. I've booted into Windows at 4.3 GHz but today just tried to see what I could do at 1.20 volts on the Vcore.
EVGA X58 Classified E-760
920 D0 # 3845B027
Corsair H50 push/pull
Corsair Dominator GT CMG6GX3M3A2000C8
Asus EAH5870
Enermax Revolution 1050W PSU
Intel X25-M 80GB SSD (OS) drive
OCZ Vertex 60 GB SSD (Applications)
WD Caviar Black 1TB SATA (Storage)
ATCS 840 Cooler Master case
|
dido41
New Member
- Total Posts : 93
- Reward points : 0
- Joined: 2009/02/28 15:48:06
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/02/25 14:03:30
(permalink)
can there be more then one cpu with the same batch number?
thanks
i7 920 - Lapped - @ 4.0ghz
Asus P6X58D bios 703
Mushkin redline 6.7.6.18 6GB
EVGA GTX 275 896MB
CORSAIR 650W
CORSAIR H50- Lapped
WD Caviar Black 640GB 64MB SATA 6.0Gb
WD Caviar Black 640GB 64MB SATA 6.0Gb
WD Caviar Black 500GB
LG Black DVD
Antec 900
Win 7 64 pro
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:*Club i7 Stability Continuation*
2010/02/25 14:06:59
(permalink)
dido41
can there be more then one cpu with the same batch number?
thanks
Of course. A batch can have thousands. Depends on how many platters are lasered in a given run.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
max silver
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2007/12/26 13:46:17
- Status: offline
- Ribbons : 0
|
wxchaser
Superclocked Member
- Total Posts : 156
- Reward points : 0
- Joined: 2010/02/08 15:07:52
- Status: offline
- Ribbons : 1
Re:*Club i7 Stability Continuation*
2010/02/26 10:23:37
(permalink)
I like your background as much as your overclock :) = nice job
EVGA X58 Classified E-760
920 D0 # 3845B027
Corsair H50 push/pull
Corsair Dominator GT CMG6GX3M3A2000C8
Asus EAH5870
Enermax Revolution 1050W PSU
Intel X25-M 80GB SSD (OS) drive
OCZ Vertex 60 GB SSD (Applications)
WD Caviar Black 1TB SATA (Storage)
ATCS 840 Cooler Master case
|
max silver
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2007/12/26 13:46:17
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/02/26 10:31:52
(permalink)
Thanks, for what I assume to be a male dominated forum (please don't shoot me if I'm wrong), there seems to be a distinct lack of women in the desktop backgrounds.
I was obviously hoping to find that Linx had finished the 100 passes successfully, so that I could focus on tightening up the timings on my ram. The timings are very loose at the moment so that I can hopefully eliminate memory problems from the picture.
|
dejanh
FTW Member
- Total Posts : 1538
- Reward points : 0
- Joined: 2006/08/07 10:40:07
- Location: Vancouver, BC, Canada
- Status: offline
- Ribbons : 3
Re:*Club i7 Stability Continuation*
2010/02/26 10:32:00
(permalink)
Time to retake my 3rd spot, even by 0.4MHz  CPU: Core i7 920 D0, #3849A832, 4650.5MHz (222MHz x 21, 221.5MHz actual), With Vdroop, 1.611V idle, 1.541V load, HyperThreading On, 3987MHz Uncore, 42C idle, 89C load DRAM: Mushkin Ascent Redline 6GB 6-7-6-18-59-1T 1600MHz kit at 1772MHz, 7-8-7-18-59-1T, DRAM Ratio sub-timings, 1.67V MOBO: EVGA X58 Classified E759 with EK FC block GPU: MSI R5850 OC at 1.225V/1000MHz/1250MHz COOLING: Water with a single HW Labs BI GTX360 cooling CPU, motherboard, and GPU(s), 23C ambient 
post edited by dejanh - 2010/02/26 10:34:35
|
Tasmac
FTW Member
- Total Posts : 1218
- Reward points : 0
- Joined: 2009/03/19 20:33:38
- Location: Anderson, South Carolina
- Status: offline
- Ribbons : 4
Re:*Club i7 Stability Continuation*
2010/02/26 10:50:24
(permalink)
very nice dejanh - those 384 series seem to the ones to have :)
I was trying to help a friend out - so started testing on my 393 batch
got back to my 4.524 on the E75944 bios (was very testing indeed)
one thing is that it took alot more vcore than the S21H
anywho trying to top my 4.528 setting
congrats on the oc :)
|
shawnizzzle
New Member
- Total Posts : 90
- Reward points : 0
- Joined: 2008/05/12 15:21:02
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/02/26 13:44:50
(permalink)
 Screename shawnizzzle
Core i7 (920 D0) Batch #: 3944A864
CPU clocked at: 4.2GHZ
Voltage: 1.3
Idle temps: 42
Load temps: 70
post edited by shawnizzzle - 2010/02/26 13:47:06
Attached Image(s)
Evga P67 FTW Core i7 3770K 5ghz 16 gigs G-skill 2000mhz Switech XT Black Ice 360 gtx Corsair 800D GTX 780SC ACX
|
dejanh
FTW Member
- Total Posts : 1538
- Reward points : 0
- Joined: 2006/08/07 10:40:07
- Location: Vancouver, BC, Canada
- Status: offline
- Ribbons : 3
Re:*Club i7 Stability Continuation*
2010/02/26 15:13:35
(permalink)
Tasmac
very nice dejanh - those 384 series seem to the ones to have :)
I was trying to help a friend out - so started testing on my 393 batch
got back to my 4.524 on the E75944 bios (was very testing indeed)
one thing is that it took alot more vcore than the S21H
anywho trying to top my 4.528 setting
congrats on the oc :)
Thanks  I decided to do a quick run this morning while I was testing my GPU  I gave up on 44 BIOS. To buggy for me. S3 does not work correctly (changes CAS to CAS 11 regardless on what is set in the BIOS, e.g., if DRAM is set to 6-7-6 before S3 after S3 it will be 11-7-6). Also problems with setting DRAM 2:10 multiplier, and I am sure there are others that I did not even bother discovering.
|
Tasmac
FTW Member
- Total Posts : 1218
- Reward points : 0
- Joined: 2009/03/19 20:33:38
- Location: Anderson, South Carolina
- Status: offline
- Ribbons : 4
Re:*Club i7 Stability Continuation*
2010/02/26 15:17:35
(permalink)
SimC33, before ya give up on your mem ya might want to try a different bios than the 44
I also found it very buggy when ocing
|
Alucard666
CLASSIFIED ULTRA Member
- Total Posts : 6158
- Reward points : 0
- Joined: 2007/12/22 16:19:50
- Location: Miramar, FL
- Status: offline
- Ribbons : 12
Re:*Club i7 Stability Continuation*
2010/02/26 15:45:14
(permalink)
Count me in there too!!!! Rig MOBO: eVGA X58 759 CLASSIFIED (44 Bios) CPU: i7 920 D0 Batch # 3849A832 RAM: 4GB Corsiar Dominators 8-8-8-24-88-1T GPU 1 eVGA GTX 285 FTW Edt. PSU: Silverston DA1000 1000w CPU: Core i7 920 D0, #3849A832, 4095.5MHz (195MHz x 21), Without Vdroop, 1.2751V idle, 1.2621V load, HyperThreading On, X16 Uncore, 33C idle, 74C load DRAM: 4GB Corsair Domintaors 8-8-8-24-88-1T @ 1.65V *1 stick went bad its being RMA'd* MOBO: eVGA X58 Classified E759 (Bios 44) GPU: eVGA GTX 285 FTW Edt. COOLING: Noctua UP12 with 2 Scythe 120cfm Kraze fans in a Push/pull config + 8 120mm case fans plugged up got a fan controller. HT, Turbo and Turbo performance are all enabled Here's my image ^^
post edited by Alucard666 - 2010/02/26 17:36:29
Attached Image(s)
|| i7 2600k @ 4.2 Ghz || H70 || Maximus 4 Extreme || eVGA GTX 680 {2-Way SLi} || 16GB Vengeance || F120GB x2 [RAID 0] || 1 4TB WD Green || Creative Sound Blaster Z || AX1200 PSU || HAF 932 || Samsung 46" 1080p 240hz 3D LED || z5500 + G930 || K800 + Performance MX ||
|
Re:*Club i7 Stability Continuation*
2010/02/28 09:52:03
(permalink)
After a sleepless night of stability testing I forgot to include the notepad text in my screenshot.  However, this was just to get to the 4.0Ghz plateau first as my goal is 4.2GHz. Voltages are still a work in progress but I wanted to throw it out there anyways if it helps anyone. Screename: HeaDSHoTs
Batch #: 3939B078
CPU clocked at: 4021.9 (192 x 21)
Voltage: 1.31825V (W/O Vdroop)
Idle temps: 35/34/36/31
Load temps: 72/72/72/67 HT on / 12GB RAM @ 8-8-8-24-88-2T 1538MHz 
post edited by HeaDSHoTs - 2010/02/28 09:54:08
Intel Core i7 920 3939B078 @ 4.0Ghz at 1.3V Corsair H50 push/pull eVGA x58 SLi A1 E758 OCZ Gold 12GB (6x2GB) DDR3 1600MHz @ 8-8-8-24 / OCZ XTC Ram Cooler 2x GTX 460 768MB SLi @ 835/1670/4100 3x NEC 20WMGX2 AS-IPS 20.1" LCD 4x WD 640GB Blue RAID5 on a Perc 5/i Creative Elite Pro + Logitech Z-5300 + Creative HS-900 Headset Antec 900 (Modded) + Antec TruePower Quattro 850W Logitech G15 (Blue) + G9x
|
Rudster816
CLASSIFIED Member
- Total Posts : 4357
- Reward points : 0
- Joined: 2007/08/03 22:07:51
- Location: Eastern Washington
- Status: offline
- Ribbons : 18
Re:*Club i7 Stability Continuation*
2010/03/03 02:59:23
(permalink)
[22:00:32] NordicJedi: the only way i can read this chatroom is if i imagine you're all dead  
|
dejanh
FTW Member
- Total Posts : 1538
- Reward points : 0
- Joined: 2006/08/07 10:40:07
- Location: Vancouver, BC, Canada
- Status: offline
- Ribbons : 3
Re:*Club i7 Stability Continuation*
2010/03/04 13:04:14
(permalink)
When's the next update? I want my score up
|
HalloweenWeed
CLASSIFIED Member
- Total Posts : 4816
- Reward points : 0
- Joined: 2009/11/13 03:32:55
- Location: Maine, USA
- Status: offline
- Ribbons : 36
Re:*Club i7 Stability Continuation*
2010/03/06 09:34:06
(permalink)
Main (gaming) rig: i7-3930K; Asus Rampage IV Extreme; H100 W/p-p Excaliburs, AS5; MSI 7870 2GD5/OC; Crucial M4 SSD 256GB. See my primary ModsRigs: Adam for the rest, and I have a second (wife's) rig Asus Rampage III Extreme & 960: Eve.   Overclocking is useless to me if it is not rock stable.
|
kurtwelday
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2009/12/26 00:39:58
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/03/07 00:51:21
(permalink)
Screename: kurtwelday
Core i7 (920) D0 Batch #: 3941B195
CPU clocked at: 4001MHz (191 x 21)
Voltage: 1.352
Idle temps: 26-20-25-24
Load temps: 84-84-78-79 
|
SimC33
CLASSIFIED Member
- Total Posts : 2478
- Reward points : 0
- Joined: 2009/03/31 10:38:08
- Status: offline
- Ribbons : 9
Re:*Club i7 Stability Continuation*
2010/03/09 01:34:28
(permalink)
So heres what I accomplished after getting the new mushkin ram...I am pleased...gonna buy a bigger radiator so I can get the chip to 4.5. I will update the post probably tomorrow Screename: SimC33
Core i7 (920) D0 Batch #:
CPU clocked at: 4419.8 <-- wish I would have caught the 4420.2 on the screenshot...
Voltage: 1.352
Idle temps: 44,44,45,43
Load temps: 85-90's 
 HEATWARE Gaming/Folding Rig 1: Intel Core i7 2600k @ 4.91GHz -l- Gigabyte GA-Z68X-UD7-B3 -l- 8GB Mushkin Blackline DDR3 1866 mhz -l- EVGA GTX 580 SC DS -l- Silverstone 1000w PSU -l- Cooler Master HAF 932 -l- 24" BenQ v2400vw -l- Windows 7 x64 -l- Ubuntu 11.04 -l- 2 x WD Velociraptor 10kRPM in RAID0 -l- Intel 80GB SSD -l- CPU Watercooled
|
legma
Superclocked Member
- Total Posts : 169
- Reward points : 0
- Joined: 2010/02/05 18:59:10
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/03/09 08:16:49
(permalink)
Please count me in. Screename: legma Core i7 (920) D0 Batch #: 3912B182 CPU clocked at: 4189.7 MHz Voltage: 1.305 V Idle temps: 34-32-36-32 Load temps: 81-82-81-77 
Attached Image(s)
|
fubarnoob
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2010/02/14 10:15:54
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/03/12 00:06:15
(permalink)
|
ugotd8
Superclocked Member
- Total Posts : 105
- Reward points : 0
- Joined: 2009/12/12 22:17:34
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/03/13 20:27:46
(permalink)
Core i7 (920) D0 Batch #: 3939B977 CPU clocked at: 4126.7 MHz Voltage: 1.34V Load ( Vdroop ON (1.4325 in BIOS) / HT ON) Idle temps: 38-39-40-35 Load temps: 81-80-78-75 Disappointed with how much vcore this chip required to get past 4.0, wondering if I got a dud, but this is my first I7 920 so I'm not sure. The H50 seems to be working pretty well, I have the radiator mounted on the top of my HAF932, and when I switched the push/pull fans from intake to exhaust, it dropped 5c off my load temps.
Attached Image(s)
|
rexrzer77
SSC Member
- Total Posts : 830
- Reward points : 0
- Joined: 2009/04/21 22:40:11
- Status: offline
- Ribbons : 11
Re:*Club i7 Stability Continuation*
2010/03/14 04:27:43
(permalink)
I haven't been back to this place in 4.5 months, so it's good to see all the new OC's happening, albeit with some BIOS and other stuff I am not familiar with...it's all good.  HalloweenWeed--nice moniker! I see you've got some RAM in the mix, so good to see that also... 12GB is no easy thing to get stable and fast both. Now get it up there close to mine and you'll be stylin'.  Later gents, rexrzer77 
No.1-Core i7 970+Megahalems+24GB Hyper-X RAM (6x4GB)+Areca 1680IX-8 Hardware RAID 8TB+2 GTX 560Ti SC SLI+Asus Xonar Essence ST Audio Card +Corsair HX1050+EVGA E760 Classy+HAF 932+24/7 4.2Ghz ON AIR 1.34V No.2-Core i7 920 D0 Lapped+6GB G.Skill RAM+HAF 922+24/7 4.2Ghz ON AIR No.3-Core i7 920 D0+6GB Patriot RAM+CM Advance+24/7 4.2Ghz ON AIR 
|
Fugawii
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2008/12/13 04:09:21
- Location: South Dakota
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/03/14 13:09:18
(permalink)
Fugawii built a space heater: Core i7-920-D0 Batch # 3944A 666
Mushkin Redline(1600) 6-7-6-18-72-1T
CPU clock: 4043 Mhz (192.5 x 21)
Vcore: 1.35
Vtt: +75
Vdroop: On
HT: On
idle temps: 34-39
load temps: 70-79
800D case with H50 mounted on top as exhaust (push/pull) 1500 rpm Xigmateks.
I took a run at 4.105 and I dont think the H50 is going to do it set up like this.
.
|
Seaquest
Superclocked Member
- Total Posts : 239
- Reward points : 0
- Joined: 2009/09/06 16:21:07
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/03/14 15:36:18
(permalink)
 Intel Core i7 920 D0 @ 4.2GHz |CPU Cooler Prolimatech MegaShadow with 2x Scythe Slipstream 1900rpm N/S (push-pull) | EVGA X58 Classified 760 | Windows 7 x64 Ultimate | EVGA GeForce GTX 295 CO-OP SC | Samsung P2250 LCD | Mushkin Redline 6GB DDR3 PC3-16000 @ 1600MHz 6-6-6-24-68-1T | SpinPoint F3 1TB | Creative X-Fi Titanium Fatal1ty Professional | Logitech G15 | Logitech G7 Mouse | Antec Twelve Hundred | Scythe Kaze Server MFC | Corsair HX850W |
|
HalloweenWeed
CLASSIFIED Member
- Total Posts : 4816
- Reward points : 0
- Joined: 2009/11/13 03:32:55
- Location: Maine, USA
- Status: offline
- Ribbons : 36
Re:*Club i7 Stability Continuation*
2010/03/14 19:11:00
(permalink)
Fugawii
Fugawii built a space heater:
Core i7-920-D0 Batch # 3944A666
Mushkin Redline(1600) 6-7-6-18-72-1T
CPU clock: 4043 Mhz (192.5 x 21)
Vcore: 1.35
Vtt: +75
Vdroop: On
HT: On
idle temps: 34-39
load temps: 70-79
800D case with H50 mounted on top as exhaust (push/pull) 1500 rpm Xigmateks.
I took a run at 4.105 and I dont think the H50 is going to do it set up like this.
Wow, 1.35V, huh? Mine's going that fast at 1.26875V. With 12GB even.
Main (gaming) rig: i7-3930K; Asus Rampage IV Extreme; H100 W/p-p Excaliburs, AS5; MSI 7870 2GD5/OC; Crucial M4 SSD 256GB. See my primary ModsRigs: Adam for the rest, and I have a second (wife's) rig Asus Rampage III Extreme & 960: Eve. Overclocking is useless to me if it is not rock stable.
|
Sum1uNo83 
CLASSIFIED Member
- Total Posts : 2692
- Reward points : 0
- Joined: 2009/04/14 19:57:32
- Location: Florida
- Status: offline
- Ribbons : 12
Re:*Club i7 Stability Continuation*
2010/03/14 19:37:15
(permalink)
4.2 ghz 99.9% Stable Mother Board ( EVGA X58 SLI E758 - A1 ) Drivers ( Windows 7 Installed ) Bios ( 49 ) CPU ( Core i7 920 D0 ) CPU Cooler ( Megahalems Rev.B / PK-1 / Ultra kaze 120mm x 38mm - Push ) Memory ( Corsair XMS3 1600mhz 8-8-8-24 6gb ) PSU ( Corsair HX1000 ) GPU ( GTX 285 1gb) Drivers ( 195.62 ) Operating System ( Windows 7 Ultimate x64 ) CPU Clock Ratio ( 20X ) CPU Host Frequency (Mhz) ( 201 ) MCH Strap ( Auto ) CPU Uncore Frequency (Mhz) ( 16x ) CPU Clock Skew ( 0 ps ) Spread Spectrum ( Disabled ) PCIE Frequency (Mhz) ( 100 ) OC Recovery ( Enabled ) Memory Speed ( Standard ) Memory Control Setting ( Enabled ) Memory Frequency ( 2:8 ) Channel Interleave Setting ( 6 Way ) Rank Interleave Setting ( 4 Way ) Memory Low Gap ( Auto ) tCL Setting ( 8 ) tRCD Setting ( 8 ) tRP Setting ( 8 ) tRAS Setting ( 24 ) tRFC Setting ( 88 ) Command Rate ( 1t ) EVGA VDroop Control ( Without VDroop ) CPU VCore ( 1.25v ) ( 1.32 under load ) CPU VTT Voltage ( +125mV ) CPU PLL VCore ( Auto ) QPI PLL VCore ( 1.3v ) DIMM Voltage ( 1.65v ) IOH VCore ( ( Auto) IOH/ICH I/O Voltage ( Auto ) ICH VCore ( Auto ) CPU PWM Frequency ( 800 KHZ ) Intel SpeedStep ( Disabled ) Turbo Mode Function ( Enabled ) CxE Function ( Disabled ) Execute Disable Bit ( Disabled ) Virtualization Technology ( Disabled ) Intel HT Technology ( Enabled ) Active Processor Cores ( All ) QPI Control Settings ( Enabled ) QPI Link Fast Mode ( Enabled ) QPI Frequency Selection ( Auto ) PnP/PCI PCI Express Maximum Payload Size ( 128 ) CPU-Z Validation: [link=http://i689.photobucket.com/albums/vv256/jrmitchell1983/ValidationCPUZ.jpg] Idle after Linx: http://i689.photobucket.com/albums/vv256/jrmitchell1983/LinxIdle.jpg Load durning Linx: [link=http://i689.photobucket.com/albums/vv256/jrmitchell1983/LinxLoad.jpg] Prime95 Blend 4 hours: http://i689.photobucket.com/albums/vv256/jrmitchell1983/Prime95Blend4Hours.jpg ( Already tested Prime95 blend for 24 hours and OCCT ) - sorry no pics of this to lazy to do it again
|
Fugawii
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2008/12/13 04:09:21
- Location: South Dakota
- Status: offline
- Ribbons : 0
Re:*Club i7 Stability Continuation*
2010/03/15 05:22:57
(permalink)
HalloweenWeed
Fugawii
Fugawii built a space heater:
Core i7-920-D0 Batch # 3944A666
Mushkin Redline(1600) 6-7-6-18-72-1T
CPU clock: 4043 Mhz (192.5 x 21)
Vcore: 1.35
Vtt: +75
Vdroop: On
HT: On
idle temps: 34-39
load temps: 70-79
800D case with H50 mounted on top as exhaust (push/pull) 1500 rpm Xigmateks.
I took a run at 4.105 and I dont think the H50 is going to do it set up like this.
Wow, 1.35V, huh? Mine's going that fast at 1.26875V. With 12GB even.
I'd be rather shocked if you were running 1.26875 with Vdroop ON. There are some great OCing guides on these forums explaining exactly what Vdroop does and doesn't do. Anyways... Thanks for your 2 cents... again.
post edited by Fugawii - 2010/03/15 05:42:38
|
