*Club i7 Stability Continuation*

Page: << < ..3132333435.. > >> Showing page 32 of 37
Author
Post
Essentials Only Full Version
HeavyHemi
Omnipotent Enthusiast
  • Total Posts : 10929
  • Reward points : 0
  • Joined: 2008/11/28 20:31:42
  • Location: Western Washington
  • Status: offline
  • Ribbons : 57
Re:*Club i7 Stability Continuation* 2010/05/21 15:08:28 (permalink)
CPU Core I7 930
Cpu Clock 4210 MHz
Voltage 1.37500 w/o VDroop
Idle Temps 40, 34, 38, 33
Load Temps 88, 83, 85, 80
HT ON


Attached Image(s)


EVGA E758/i7 980x 4.3ghz 1.36v
12GB Corsair Dominator 2000C9
GTX 980Ti w/GTX TITAN SC for PhysX
Crucial M4 512GB SSD/2x WD RE4 Black 2TB 
Corsair H50 Cooler/Corsair AX1200/Window 10 Pro
#931
jamn1
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2004/11/17 15:24:11
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/22 13:12:48 (permalink)

CPU I7 930

CPU Clock 4084
Voltage 1.25625 w/o vdroop
Idle Temps: 36/31/37/29
load Temps 65/61/63/57
HT on








Intel 930 24/7@ 4.27GHz @1.33V B#3002A650 
EVGA E760 Classified BIOS E760S61J
EVGA GTX 260 SLI
Corsair 2000C7 Dominator GT 6 GB
PCP&C TuroCool 1KW SR PSU
Auzentech Bravura 7.1 
MM UFO
Dual Loop
Alphacool Laing DDC (x3) 
Heatkiller CPU 3.0
Heatkiller GPU-X2 w/Dual-Link
EK FB Acetal+Nickel waterblock
   


#932
DeRico
CLASSIFIED Member
  • Total Posts : 3808
  • Reward points : 0
  • Joined: 2008/05/21 15:02:14
  • Location: 福生、日本
  • Status: offline
  • Ribbons : 9
Re:*Club i7 Stability Continuation* 2010/05/22 14:30:59 (permalink)
i7 920 D0

Clock: 4.189.7Mhz
Voltage:1.329, 1.289 w/ VDroop
Temp Idle: 42/39/41/36
Temp Load: 73/71/71/66
HT on



#933
spawn447
SSC Member
  • Total Posts : 574
  • Reward points : 0
  • Joined: 2007/01/11 22:53:03
  • Location: Reading , PA
  • Status: offline
  • Ribbons : 3
Re:*Club i7 Stability Continuation* 2010/05/22 15:06:11 (permalink)
hey jamn1 would you mind posting your bios template here : http://forums.evga.com/tm.aspx?m=179016



#934
t_7
New Member
  • Total Posts : 21
  • Reward points : 0
  • Joined: 2008/10/09 03:08:44
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/22 17:07:21 (permalink)
t_7
W3520
EVGA Micro SLI
HT on
4545.5MHz
1.399V
25/21/24/20
63/60/60/57




#935
jpeck2009
ACX Member
  • Total Posts : 396
  • Reward points : 0
  • Joined: 2009/08/13 16:54:36
  • Status: offline
  • Ribbons : 1
Re:*Club i7 Stability Continuation* 2010/05/26 17:05:58 (permalink)
jpeck2009
i7 930 Batch 3941B670
4063.89 Mhz
1.272 Volts
idle: 38/34/39/32
load: 87/85/84/80
HT ON
 


         
#936
argon5
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2010/04/03 00:11:57
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/27 04:28:05 (permalink)
cpu i7 965x http://s954.photobucket.com/albums/ae27argon5/
post edited by argon5 - 2010/05/27 06:09:56
#937
ShockTheMonky
Omnipotent Enthusiast
  • Total Posts : 10427
  • Reward points : 0
  • Joined: 2006/01/28 18:41:25
  • Status: offline
  • Ribbons : 45
Re:*Club i7 Stability Continuation* 2010/05/27 05:09:28 (permalink)
argon5

cpu i7 965x http://s954.photobucket.com/albums/ae27argon5/stability%20test%20linx/


Bad link.

"Psst. Zip up. Your ignorance is showing." 
"I don't suffer from insanity. I enjoy every minute of it!"
"Can an Atheist get insurance for acts of god?


#938
argon5
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2010/04/03 00:11:57
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/27 06:14:58 (permalink)
sorry can't seem to get my photo links to work will try tomorrow.
post edited by argon5 - 2010/05/27 06:42:50
#939
ShockTheMonky
Omnipotent Enthusiast
  • Total Posts : 10427
  • Reward points : 0
  • Joined: 2006/01/28 18:41:25
  • Status: offline
  • Ribbons : 45
Re:*Club i7 Stability Continuation* 2010/05/27 06:31:24 (permalink)
argon5

try this one sorry about all the photos.


Nope. No good either.

"Psst. Zip up. Your ignorance is showing." 
"I don't suffer from insanity. I enjoy every minute of it!"
"Can an Atheist get insurance for acts of god?


#940
crea78
Superclocked Member
  • Total Posts : 140
  • Reward points : 0
  • Joined: 2009/07/08 06:30:22
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/27 13:52:28 (permalink)
Core i7 (920 DO) Batch #:  unknown
CPU clocked at:  4.0GHz
Voltage:  1.3000V with VDroop
Idle temps:  49, 46, 45, 48C
Load temps:  84, 82, 81, 79C
H/T ON

Imageshack File



Case: Cooler Master HAF 932 + 7 Xigmatek 120mm Fans
CPU: Intel i7 920 D0 Stepping @ 4 GHz (1.282V)            
MoBo: EVGA x58 SLI
GPU: EVGA GTX 480 SC (820/1640/1945)
RAM: Mushkin Blackline DDR3-1600 (3x2GB)
CPU Heatsink: Prolimatech Megahalem + Scythe Gentle Typhoons 1850 in a Push/Pull Config
HDD: Intel X-25M 80GB G2 + WD 1TB Caviar Black HDD
PSU: Corsair TX850
Monitor: Samsung 2343BWX 23" LCD (2048x1152)
Optical Drives: Sony DVD Writer


#941
jambisource
ACX Member
  • Total Posts : 373
  • Reward points : 0
  • Joined: 2010/04/06 21:05:09
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/27 15:18:39 (permalink)
Jambisource
Core i7930 D0   Batch #:  
CPU clocked at: 4000.8 mHz 
Voltage:  1.29 without vDroop
Idle temps:  45/43/47/40
Load temps: 80/79/80/75
With Hyper Threading

post edited by jambisource - 2010/06/09 14:15:33



 
 
#942
crea78
Superclocked Member
  • Total Posts : 140
  • Reward points : 0
  • Joined: 2009/07/08 06:30:22
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/27 15:39:28 (permalink)
jambisource, can't see your load temps but it looks to be in the mid to high 70s.  Don't know for sure since the print is so small.

Case: Cooler Master HAF 932 + 7 Xigmatek 120mm Fans
CPU: Intel i7 920 D0 Stepping @ 4 GHz (1.282V)            
MoBo: EVGA x58 SLI
GPU: EVGA GTX 480 SC (820/1640/1945)
RAM: Mushkin Blackline DDR3-1600 (3x2GB)
CPU Heatsink: Prolimatech Megahalem + Scythe Gentle Typhoons 1850 in a Push/Pull Config
HDD: Intel X-25M 80GB G2 + WD 1TB Caviar Black HDD
PSU: Corsair TX850
Monitor: Samsung 2343BWX 23" LCD (2048x1152)
Optical Drives: Sony DVD Writer


#943
jambisource
ACX Member
  • Total Posts : 373
  • Reward points : 0
  • Joined: 2010/04/06 21:05:09
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/27 18:10:53 (permalink)
oh sorry .
for this bench
 
80/79/80/75 load
 
 
lowered some voltage and reconfigured my h50 (just got it and trying to feel it out) so i dropped my loads by about 6c.
 
 
Out of curiosity with both my tuniq and now my h50 my 4th core is always much lower than any other core. It is loading at 100% like the others and passes all stresses. Is somethinig warped or is it common place for a single core to run cooler?
Here is the link
 
If you want to see the full image
post edited by jambisource - 2010/05/27 18:13:15



 
 
#944
argon5
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2010/04/03 00:11:57
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/27 19:22:35 (permalink)
another test
post edited by argon5 - 2010/05/27 19:25:23
#945
crea78
Superclocked Member
  • Total Posts : 140
  • Reward points : 0
  • Joined: 2009/07/08 06:30:22
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/28 05:34:51 (permalink)
I noticed while running Prime95 at my current 4.0GHz settings (9.5 hours in), the core temps seem to be a constant 6-6C cooler than running LinX.  Is this typical, and my max P95 temps seem to be a 2-3C lower as well.  All of this is with an ambient temperature of 86F.
post edited by crea78 - 2010/05/28 05:39:29

Case: Cooler Master HAF 932 + 7 Xigmatek 120mm Fans
CPU: Intel i7 920 D0 Stepping @ 4 GHz (1.282V)            
MoBo: EVGA x58 SLI
GPU: EVGA GTX 480 SC (820/1640/1945)
RAM: Mushkin Blackline DDR3-1600 (3x2GB)
CPU Heatsink: Prolimatech Megahalem + Scythe Gentle Typhoons 1850 in a Push/Pull Config
HDD: Intel X-25M 80GB G2 + WD 1TB Caviar Black HDD
PSU: Corsair TX850
Monitor: Samsung 2343BWX 23" LCD (2048x1152)
Optical Drives: Sony DVD Writer


#946
jambisource
ACX Member
  • Total Posts : 373
  • Reward points : 0
  • Joined: 2010/04/06 21:05:09
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/28 12:42:39 (permalink)
I believe small fft's and blend result in lower temps. 



 
 
#947
Oddball99
ACX Member
  • Total Posts : 342
  • Reward points : 0
  • Joined: 2009/10/13 11:57:06
  • Location: Texas
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/29 07:27:24 (permalink)
Oddball99
Core i7 920  Batch#3950A421
4021.8 MHz w/VDroop on
Voltage: 1.329
Idle: 41/38/42/38
Load: 75/74/76/71
HT on


   
  
post edited by Oddball99 - 2010/05/29 07:29:27

Attached Image(s)


 
 
  
 
 
#948
jambisource
ACX Member
  • Total Posts : 373
  • Reward points : 0
  • Joined: 2010/04/06 21:05:09
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/29 16:04:27 (permalink)
Oddball: shouldnt your gflops be much higher than that at 4.0?



 
 
#949
Oddball99
ACX Member
  • Total Posts : 342
  • Reward points : 0
  • Joined: 2009/10/13 11:57:06
  • Location: Texas
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/29 17:35:58 (permalink)
Don't know,should they be?

 
 
  
 
 
#950
chubby bunny
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2010/01/19 19:37:39
  • Location: Hillsboro, OR
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/29 22:24:40 (permalink)
I've been using the GFLOPS rating in LinX as a measure of when my overclock is becoming unstable. Is that reasonable? My current overclock , although less in raw clock speed (for the moment), is showing an increase in FLOPS compared to my last post, according to LinX.

Edit:

IE: 200 MHz bump decreases GFLOPS by 10 or so per trial = instability?
post edited by chubby bunny - 2010/05/30 00:17:03

Intel i7 2600k @ Stock? / EVGA 160-SB-E679-KR
Mushkin 4x4GB DDR3 1600 / 2x EVGA GTX 580 3G
Corsair AX1200 / Lian Li PC-A16
#951
spawn447
SSC Member
  • Total Posts : 574
  • Reward points : 0
  • Joined: 2007/01/11 22:53:03
  • Location: Reading , PA
  • Status: offline
  • Ribbons : 3
Re:*Club i7 Stability Continuation* 2010/05/30 06:20:46 (permalink)
spawn447
Core i7 930 Batch #: 3951A808 
CPU clocked at: 4210.65  MHz 
Voltage: 1.34375 in bios 
Idle temps: 38,40,40,37
load temps 68,69,67,65
HT off


post edited by spawn447 - 2010/05/30 06:28:20

Attached Image(s)



#952
crea78
Superclocked Member
  • Total Posts : 140
  • Reward points : 0
  • Joined: 2009/07/08 06:30:22
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/05/31 13:53:39 (permalink)
delete
post edited by crea78 - 2010/05/31 14:07:16

Case: Cooler Master HAF 932 + 7 Xigmatek 120mm Fans
CPU: Intel i7 920 D0 Stepping @ 4 GHz (1.282V)            
MoBo: EVGA x58 SLI
GPU: EVGA GTX 480 SC (820/1640/1945)
RAM: Mushkin Blackline DDR3-1600 (3x2GB)
CPU Heatsink: Prolimatech Megahalem + Scythe Gentle Typhoons 1850 in a Push/Pull Config
HDD: Intel X-25M 80GB G2 + WD 1TB Caviar Black HDD
PSU: Corsair TX850
Monitor: Samsung 2343BWX 23" LCD (2048x1152)
Optical Drives: Sony DVD Writer


#953
fubarnoob
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2010/02/14 10:15:54
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/06/01 15:36:56 (permalink)
920 213 BClk Bios 59 Full.jpeg
Core i7 (920 D0) Batch # 3944A982
CPU @ 4462.1 GHz
VCore @ 1.47500V (w/o VDroop)
Idle Temps 39, 33, 36, 33
Load Temps 85, 80, 83, 75
 
Updated OC after installing a watercooled loop for the CPU.
 

#954
EnSabanNur
CLASSIFIED Member
  • Total Posts : 3394
  • Reward points : 0
  • Joined: 2008/09/03 12:00:55
  • Status: offline
  • Ribbons : 22
Re:*Club i7 Stability Continuation* 2010/06/01 18:43:33 (permalink)
Oddball99               
Don't know,should they be?


50k + @ 4.0ghz w/ 920 or 930.

make sure you haven't got anything running in the background and run LinX again on 'all' size.

my 930 get 38k at stock clocks ;)

No longer an active member of the EVGA forums.
#955
chubby bunny
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2010/01/19 19:37:39
  • Location: Hillsboro, OR
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/06/02 00:12:11 (permalink)

HT On this time! Cranked the fans up and getting ready to let it loose on F@H. I think the CPU VCORE can come down a bit- I'll give it a try tomorrow.


chubby bunny 
Core i7 920 D0 3938B020 
4210.5 (200.5x21) 
1.3v Idle, ~1.34 Max at load - VDroop off, HT ON
Idle 43,39,39,37
Load 84,79,79,75


post edited by chubby bunny - 2010/06/02 07:40:16

Intel i7 2600k @ Stock? / EVGA 160-SB-E679-KR
Mushkin 4x4GB DDR3 1600 / 2x EVGA GTX 580 3G
Corsair AX1200 / Lian Li PC-A16
#956
Snakeyes
New Member
  • Total Posts : 86
  • Reward points : 0
  • Joined: 2007/12/27 12:28:43
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/06/02 04:21:46 (permalink)
Haf 932 
Classified 760 
i7 960 (lapped) @ 4542.5 MHz 
Watercooled HeatKiller 3.0 
160GB SSD Intel 
80GB SSD Intel           
2 x Sapphire 5870's in Crossfire 
6GB Corsair Dominator 1866 (15000) @ 1945 
PC Power  & Cooling 1200W    

Could not get free memory to run at 25000 since I have a company excel system that has to run 24/7 accessing an ftp server for latest Call report data.

Will soon try to break 4600 Mhz with HT off

Attached Image(s)


Haf 932
Classified 760
i7 960 (lapped) @ 4.475 MHz
Watercooled HeatKiller 3.0
RevoDrive X2 240
C300 256
160GB SSD Intel               
2 x Sapphire 5870's in Crossfire
6GB Corsair Dominator 1866 (15000) @ 1945
PC Power  & Cooling 1200W   


"Thats my Hummer and its greener than your Prius"






#957
Oddball99
ACX Member
  • Total Posts : 342
  • Reward points : 0
  • Joined: 2009/10/13 11:57:06
  • Location: Texas
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/06/02 11:15:56 (permalink)
EnSabanNur

Oddball99               
Don't know,should they be?


50k + @ 4.0ghz w/ 920 or 930.

make sure you haven't got anything running in the background and run LinX again on 'all' size.

my 930 get 38k at stock clocks ;)


Thanks for the advice,I had several apps running in the background.I shut most of them down and run Linx again.

Oddball99
Core i7 920  Batch#3950A421
4021 MHz w/VDroop on
Voltage: 1.329
Idle: 42/38/42/38
Load: 79/76/76/73
HT on
post edited by Oddball99 - 2010/06/03 06:08:02

Attached Image(s)


 
 
  
 
 
#958
vessk0
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2010/03/17 07:31:54
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/06/02 12:00:30 (permalink)
For 24/7 use: i7 930 @ 4.3GHz, Mushkin Redline 3x2GB DDR3 @ 1650MHz 6-8-6-20-1T / water cooled / ~21*C ambient temp



24/7 €VGA E757 | i7 930 @ 4.3GHz 1.4v | Mushkin Redline 3x2GB DDR3 @ 1650MHz 6-8-6-20 | ATi HD 5970 + nVIDIA GTS 250
Seagate 500GB 32MB| CM M1000 | CM HAF932 modded | Logitech Z-5500 | Samsung T220 | Microsoft Sidewinder X4 / SteelSeries Xai + QCK
Apogee XT+MIPS+MCW30+Laing D5+PA140.3
#959
Knuddelmonster
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2010/05/24 14:47:12
  • Location: Munich, Germany
  • Status: offline
  • Ribbons : 0
Re:*Club i7 Stability Continuation* 2010/06/03 06:04:10 (permalink)

#960
Page: << < ..3132333435.. > >> Showing page 32 of 37
Jump to:
  • Back to Mobile