bg8780
CLASSIFIED Member
- Total Posts : 2540
- Reward points : 0
- Joined: 2008/02/19 14:21:34
- Status: offline
- Ribbons : 4
I recently installed the standalone Hybrid kit on a Founder's Edition. I'm curious what kind of temps you guys are seeing. Idle:~30C Max:63C
|
asl3312
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2015/05/11 09:53:04
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/23 08:16:32
(permalink)
Got the kit for my 1070, yet to install it. Quick question.. does the pump run at full speed all the time, regardless of fan speed? thanks
post edited by asl3312 - 2016/07/23 10:08:28
|
bg8780
CLASSIFIED Member
- Total Posts : 2540
- Reward points : 0
- Joined: 2008/02/19 14:21:34
- Status: offline
- Ribbons : 4
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/23 09:51:43
(permalink)
asl3312 Got the kit for my 1070, yet to install yet. Quick question.. does the pump run at full speed all the time, regardless of fan speed? thanks
I don't think so. I've only been able to notice the blower fan getting faster when I adjust the speed in Afterburner. The pump is so quiet I can't tell if it speeds up.
|
jgonz
iCX Member
- Total Posts : 331
- Reward points : 0
- Joined: 2009/04/16 07:18:13
- Status: offline
- Ribbons : 1
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/23 09:53:13
(permalink)
Idle: ~30c Max ~40c (In a very Hot non Air Conditioned room) Load: ~50c Avg. ~55c Max ~63c
|
asl3312
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2015/05/11 09:53:04
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/23 10:07:17
(permalink)
There are only 2 wires going to the pump (+12v & Neg) so I assume that its only 1 speed. I have an adaptor I could use to run the pump at full speed from my PSU if necessary however.
|
MikeBGeyer
iCX Member
- Total Posts : 343
- Reward points : 0
- Joined: 2015/05/22 18:44:05
- Status: offline
- Ribbons : 1
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 05:23:20
(permalink)
jgonz Idle: ~30c Max ~40c (In a very Hot non Air Conditioned room) Load: ~50c Avg. ~55c Max ~63c
Did you have that FE in before you put the closed loop in? I'm just wondering how much more quite that setup is. My FE's are loud under load and I haven't decided what I'm going to do about it.
|
jgonz
iCX Member
- Total Posts : 331
- Reward points : 0
- Joined: 2009/04/16 07:18:13
- Status: offline
- Ribbons : 1
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 09:00:24
(permalink)
Yes. The difference is huge. To give you an idea. Listen to your cards fan while idle. That is about as loud as it gets under load. Cause the fans dont need to go higher than 30-40% speed.
|
ikjadoon
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2013/09/20 18:03:12
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 11:54:58
(permalink)
Can we use EVGA's 980 Hybrid AIOs on these cards? Or do we need to upgrade to the 1070/1080 Hybrid AIO? Is there a difference?
|
lordaeron1
iCX Member
- Total Posts : 306
- Reward points : 0
- Joined: 2016/06/22 21:21:24
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 12:01:02
(permalink)
asl3312 Got the kit for my 1070, yet to install it. Quick question.. does the pump run at full speed all the time, regardless of fan speed? thanks
The pump is indeed going at a constant speed. only the fan is working at variable speeds.
I7-6700k (stock) | Msi M7 gaming | Kingston hyperx savage16Gb DDR4@ 2800Mhz | Evga Gtx 1080 FTW | Corsair H110i | Samsung 840 EVO 120GB SSD + Crucial Mx 200 250GB | Seasonic X-750w Gold | Cooler Master Haf X (Aka 932) | DELL U2713h | Xonar D1.
|
jgonz
iCX Member
- Total Posts : 331
- Reward points : 0
- Joined: 2009/04/16 07:18:13
- Status: offline
- Ribbons : 1
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 12:48:38
(permalink)
ikjadoon Can we use EVGA's 980 Hybrid AIOs on these cards? Or do we need to upgrade to the 1070/1080 Hybrid AIO? Is there a difference?
Yes. Just the AIO. As you can see in the picture above. I talked about it in the thread below. http://forums.evga.com/My...FEHybrid-m2506435.aspx
|
beardog
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2010/07/25 23:16:01
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 14:03:17
(permalink)
My 1070 SC tops out at 48c and runs around 30c idle
|
jeppouza
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2014/09/30 13:53:18
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 17:35:17
(permalink)
beardog My 1070 SC tops out at 48c and runs around 30c idle
This thread is about the 1080GTX.
|
jerzeeloon
Superclocked Member
- Total Posts : 125
- Reward points : 0
- Joined: 2011/10/11 19:57:53
- Status: offline
- Ribbons : 1
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 17:52:51
(permalink)
Mine will be here Tuesday I plan to do a full rundown on temp improvements my current setup with the reference cooler I really never go over 70° c even after hours of intensive gaming, rise of the tomb raider, doom,crysis 3. That's with a custom fan curve 60°=60%,70°=70,etc. However synthetic benchmarks can get it hotter and it pretty loud. My hopes are to drop the temp and be able to lower fan. Finally put a overclock on this thing and see if I can't game for a few hours without throttling
corsair 350D Asus Maximus VI Gene 4770k @ 4.2ghz 8gb rip jaws X series 1600 888/24 500gb crucial m4 ssd 1tb wd caviar black Corsair AX760 Gtx 1080ti
|
ikjadoon
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2013/09/20 18:03:12
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 19:25:42
(permalink)
jgonz
ikjadoon Can we use EVGA's 980 Hybrid AIOs on these cards? Or do we need to upgrade to the 1070/1080 Hybrid AIO? Is there a difference?
Yes. Just the AIO. As you can see in the picture above. I talked about it in the thread below.
Thank you!! :D Great link.
|
tolagarf
New Member
- Total Posts : 48
- Reward points : 0
- Joined: 2013/11/12 10:34:28
- Location: Denmark
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/24 23:29:14
(permalink)
I would love to see a proper video review of this kit though
|
curtisfong
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2007/07/17 12:40:39
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/25 01:38:47
(permalink)
☄ Helpfulby bg8780 2016/07/25 07:03:56
The included 120mm radiator fan is extremely loud. I replaced it with a 1300 rpm Noctua. Temps are equivalent.
|
Caust
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2016/04/24 06:37:16
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/25 03:15:22
(permalink)
Put them on my 1080 sli set up and they never push much past 50 under load really. Was sitting at 69 under load before with custom fan profile on a 2000+ mhz oc. Had FE's and it was like a jet engine behind my computer before, now it is like a dream and I'm not thinking so hard on improving the air-conditioning to my room as it was getting so hot in there.
|
BTomov
Superclocked Member
- Total Posts : 246
- Reward points : 0
- Joined: 2004/11/02 03:10:52
- Location: Red Deer AB
- Status: offline
- Ribbons : 2
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/25 03:24:07
(permalink)
Can you install this on 1080 FTW? P.S. I saw it cant...
post edited by BTomov - 2016/07/25 03:27:00
|
Caust
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2016/04/24 06:37:16
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/25 03:38:32
(permalink)
Nope sure can't, only reference style boards. You saw correctly.
|
jeppouza
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2014/09/30 13:53:18
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/25 03:40:39
(permalink)
BTomov Can you install this on 1080 FTW? P.S. I saw it cant...
Yep, FTW have a different PCB.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/25 05:02:47
(permalink)
The unnecessary comments have been removed.
|
bg8780
CLASSIFIED Member
- Total Posts : 2540
- Reward points : 0
- Joined: 2008/02/19 14:21:34
- Status: offline
- Ribbons : 4
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/25 07:05:22
(permalink)
It looks like my temps maybe a little high. I'm still happy with 63C at load but you guys are certainly seeing lower temps than I am. I'm thinking about slapping a EK Vardar fan on the radiator. Anyone have experience with those fans?
post edited by bg8780 - 2016/07/25 07:10:03
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/25 07:12:12
(permalink)
jgonz Idle: ~30c Max ~40c (In a very Hot non Air Conditioned room) Load: ~50c Avg. ~55c Max ~63c
Founders Edition look very nice with Hybrid... I would not keep reference cooler more than one week if Hybrid kit give 20-25C lower temps.
|
bg8780
CLASSIFIED Member
- Total Posts : 2540
- Reward points : 0
- Joined: 2008/02/19 14:21:34
- Status: offline
- Ribbons : 4
Re: Calling those who have installed the Hybrid kit on their 1080
2016/07/25 07:18:51
(permalink)
Vlada011
jgonz Idle: ~30c Max ~40c (In a very Hot non Air Conditioned room) Load: ~50c Avg. ~55c Max ~63c
Founders Edition look very nice with Hybrid... I would not keep reference cooler more than one week if Hybrid kit give 20-25C lower temps.
I was actually impressed with the FE cooler. If you are not concerned with noise then the thermal chamber cooler of the FE is pretty damn good. Obviously, you'll want a custom fan curve. It would hit 83C full load with the stock curve. It was still pretty quiet but those temps are too high for me. With fans at 100% it kept the GPU around 60C when benching.
|
tolagarf
New Member
- Total Posts : 48
- Reward points : 0
- Joined: 2013/11/12 10:34:28
- Location: Denmark
- Status: offline
- Ribbons : 0
Re: Calling those who have installed the Hybrid kit on their 1080
2016/08/10 05:52:11
(permalink)
Just installed my Hybrid kit on an EVGA FE 1080. Clock speed: 1873 stable (stock) Power target: 120% Idle: 30C Load: Up to 53C but settles at 47C once the push/pull fan setup I opted for kicks in (based on CPU load) Pump: TBD... Hearing some annoying humm coming from the pump. Picture will come later :)
post edited by tolagarf - 2016/08/10 10:03:30
|