I never realized, that you are using 4 pumps and 4 (480) rads to only cool 1 cpu and 3 gpu's ? Huh?
 
Talk about EXTREME overkill and a waste of money, but it's your money so waste it as you wish

this computer is working 24/24 @ 100% (folding)

I want an ultra quiet computer and  very easy to work on cooling loops...
I am testing many hardware so with independent loops it's very easy to remove one card.
The cooling capacity is realy huge, but With this mods I dont want change each year my radiators.

In my last mody I use 2x 360mm for the cards and temp in 5V is not realy good @ 100% 
The CPU with one 480 it's special...because it's possible that I add one fourth cards

the space between each card is enough  large to connect a  90 ° connector

Hi, sorry for this long silence, before the end of the next week, all special parts will be tested.
New PSU will be installed,  the newest Enermax maXrevo 1500W.

The plan was a little bit modify...

The 7110 keeps the seven Caviar black and the fourth OCZ Vertex 2 with the raid card....
The 7110 will re-equiped with an i7 970, Asus Rampage III Gene, Corsair Dominator GT 3x4Go 2Ghz, EVGA GTX 580 for primary card and EVGA GTX 480 for phisiX

So on the new rig, i mount two Intel 510 120Go, one Crucial M4 240Go and one Caviar Black 2To
 
see you soon

You got the 1500W?! SICK! Got a link for that?

still on it but many work to do



 
four GTX 480 FTW
 Some hardware modification is on its way
 
stay tuned
P.s If you have a 4 way SLI bridge and you dont use it please send me a MP

I do no thought,  it gives me a headache.


1) why ? I dont need, I whant it !
2) the idea is: make one loops for each componant, 4x480mm, each one for one GTX 480. The fifth uses a 140mm radiator (CPU)
If this had been possible I would not have these radiators but the available space is used to the millimeter
3) because I have 4x GTX 480.. they were purchased and used for almost two years

I have many works to do, the end is very far away ;)
 
Thx

Looks great so far. do you have a link to the max revo 1500w PSU?

budington

little update, I add two radiators so in total this case will have six.

One 480mm for each GTX 480 and two 140mm for the cpu loop

the first that says I'm crazy




has likely due

 
you´re crazy..                      But I like it and I want to wish you good luck with this rig! 
Exceed yourself!

Hello everyone. in first I wish you a happy new year ( I know i'm a little bit late )

where to begin?
The machined parts are finished and I have worked a little bit today.

Connecting tube with so little space is a little bit scary, so please keep all your member inside the topic.


The result of this dish of spaghetti is... no one of this tubes are crushed and the door close correctly 
so I have connected the CPU loop and GPU1 loop

adding the GPU2 loop  

with GPU3 and 4 but not connected for the moment

thank you for watching

Looking VERY good!

Hi,
Thanks for comment, yes it is starting looking good.

 
Today I have put the two 140mm radiators, It’s not on the final position, I have to test if in reverse position I have enough place to put 90° connectors…
With this two, I have six radiators on this case

I have moved the CPU and GPU1 loops.


I have placed the pumps and power supply to show if all fit correctly… and it’s works… but it starts to do a lot of stuff
 

 
Thanks for watching

Thanks
I hope too :D

it's rev. 1.1

all of the construction picture are make with my cell phone, final picture with better camera