VistaHead
Omnipotent Enthusiast
- Total Posts : 9357
- Reward points : 0
- Joined: 2009/02/17 18:42:22
- Status: offline
- Ribbons : 132
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here
2009/12/29 13:34:21
(permalink)
KTOOOOM
VistaHead
What version did you try?
186.18
Try versions 190.38 or 190.62 Download Driver Sweeper, but do not run it. Download the driver version that you want to install, but do not install them. Uninstall your current drivers through Device Manager (located in your Control Panel) Boot into safe mode. Run Driver Sweeper and remove any video card drivers left (do not remove your chipset drivers). Reboot, and install the drivers that you downloaded Do this every time that you install a different set of video card drivers. Driver Sweeper: http://www.guru3d.com/category/driversweeper/
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here
2009/12/29 13:44:14
(permalink)
VistaHead
KTOOOOM
VistaHead
What version did you try?
186.18
Try versions 190.38 or 190.62
Download Driver Sweeper, but do not run it.
Download the driver version that you want to install, but do not install them.
Uninstall your current drivers through Device Manager (located in your Control Panel)
Boot into safe mode.
Run Driver Sweeper and remove any video card drivers left (do not remove your chipset drivers).
Reboot, and install the drivers that you downloaded
Do this every time that you install a different set of video card drivers.
Driver Sweeper: http://www.guru3d.com/category/driversweeper/
i will do thanks
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
snooooze
Superclocked Member
- Total Posts : 145
- Reward points : 0
- Joined: 2009/08/29 15:47:59
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here
2009/12/29 13:50:30
(permalink)
KTOOOOM...where on the world are you?
EVGA X299 10940X / @4500 64GB RAM  heatware I know its empty
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here
2009/12/29 13:59:10
(permalink)
snooooze
KTOOOOM...where on the world are you?
im from Saudi Arabia where all gamers buy alienware PC beshhhh
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
snooooze
Superclocked Member
- Total Posts : 145
- Reward points : 0
- Joined: 2009/08/29 15:47:59
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here
2009/12/29 14:09:50
(permalink)
EVGA X299 10940X / @4500 64GB RAM heatware I know its empty
|
Stray_Bullet
iCX Member
- Total Posts : 389
- Reward points : 0
- Joined: 2008/07/12 22:09:13
- Location: New York, USA
- Status: offline
- Ribbons : 8
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/29 15:11:58
(permalink)
Okay... First... First I noticed your auto advanced timings are definitely causing instability... First I noticed your tRC... "http://www.techpowerup.com/printarticle.php?id=131"
* tRC Timing: Row Cycle Time. The minimum time in cycles it takes a row to complete a full cycle. This can be determined by; tRC = tRAS + tRP. If this is set too short it can cause corruption of data and if it is to high, it will cause a loss in performance, but increase stability. So your tRC should be atleast 31... The rest should be okay. I never went past 1.95v on this memory cause it was not stable at 1.9 while OCing, but I tried 1.975 & 2.0 but I was getting freezes... I had two sticks also... SPP voltage being too low was another cause for my freezes. But you should be alright @ 1.42 cause your only using 1333 FSB, one stick of memory & one video card... But maybe try to put it at 1.47 or whatever one bump up is & see if your freezes go away. Next, Vista... I keep hearing you say keep P1 & P2 on auto for stock clocks & enabled if OCing. It is not like that from what I understand from the research I have done the past almost year since these settings came about. P1 & P2 came into effect in P04 bios. Pretty much these settings are switches, while enabled It tightens specific timings within the SPP & memory. That's why an increase to SPP votage is necessary to enable these settings & maintain stability. Not sure why I am quoting this, as evga or maybe it was nvidias mistake, but there is a huge contradiction in this quote... "http://forums.evga.comarchive/tm.asp?m=332217"
*The new P04 BIOS includes two new options that can boost memory performance. These options control internal timing parameters. These options can give a boost to performance at higher FSB and DDR speeds. A setting of "Auto" gives you the best overclocking possible. A setting of "Enabled" gives you the best performance possible. But these are the most important parts... A setting of "Auto" gives you the best overclocking possible. A setting of "Enabled" gives you the best performance possible. Auto relaxes chipset & memory timings = more stability but less performance. Enabled tightens chipset & memory timings = more performance but less stability. Here is an example of a memory bench with P1 & P2 on auto, then enabled... These are the only changes made to bios... P1 & P2 on AUTO  P1 & P2 on ENABLED 
post edited by Stray_Bullet - 2009/12/29 17:49:32
Attached Image(s) 
My Machine: *Antec 1200 Case *EVGA 790i FTW|SZ16|nForce 15.58 *Q9650 @ 4.275 GHz Linked/Sync @ 1900 MHz *Prolimatech Megahalems CPU Cooler *Patriot 2x2GB PVS34G2000LLKN 8-8-8-23-2t|8-40-12-17-23-7.8uS-110 (black slots) *BFG 1000 Watt PSU *3x GTX 275|Forceware 270.61 *On-board Sound card|5.1 Surround *2 WD VelociRaptors|RAID 0 * 7 x64 790i BIOS Template| Critical Damage Incorporated 
|
snooooze
Superclocked Member
- Total Posts : 145
- Reward points : 0
- Joined: 2009/08/29 15:47:59
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/29 15:27:42
(permalink)
I'm Confused...I think you need to edit your titles to the pics in post #96 stray
EVGA X299 10940X / @4500 64GB RAM heatware I know its empty
|
VistaHead
Omnipotent Enthusiast
- Total Posts : 9357
- Reward points : 0
- Joined: 2009/02/17 18:42:22
- Status: offline
- Ribbons : 132
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/29 15:32:54
(permalink)
Yes, I remember that thread from the old forums, but what I have been noticing is that a few members that only wanted to run stock had problems with P1 & P2 enabled, but once they went to back to auto, the problems went away. Normally, I will have the member use auto, and if a problem persists, I have them change to enabled. That thread not withstanding, sometimes with P1 & P2, it seems to be a crap shoot. I can't disagree with the chart that you provide above, but it does not seem to apply across the board. Perhaps it is dependent on the brand of RAM being used in conjunction with the FSB of the chip that is being used....I don't know, but I do know that following that thread does not always work for an individual...kind of like the OCZ RAM thing.....
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/29 15:34:25
(permalink)
Stray_Bullet
Okay... First...
First I noticed your auto advanced timings are definitely causing instability...
First I noticed your tRC...
" [link=http://www.techpowerup.com/printarticle.php?id=131%22http://www.techpowerup.com/printarticle.php?id=131"[/link]]
* tRC Timing: Row Cycle Time. The minimum time in cycles it takes a row to complete a full cycle. This can be determined by; tRC = tRAS + tRP. If this is set too short it can cause corruption of data and if it is to high, it will cause a loss in performance, but increase stability.
So your tRC should be atleast 31...
The rest should be okay. I never went past 1.95v on this memory cause it was not stable at 1.9 while OCing, but I tried 1.975 & 2.0 but I was getting freezes... I had two sticks also...
SPP voltage being too low was another cause for my freezes. But you should be alright @ 1.42 cause your only using 1333 FSB, one stick of memory & one video card... But maybe try to put it at 1.47 or whatever one bump up is & see if your freezes go away.
first thank you for your reply so i should increase tRc from 27 to 31 and bump up the voltage little bit then i will do after testing the 190.68 driver
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
VistaHead
Omnipotent Enthusiast
- Total Posts : 9357
- Reward points : 0
- Joined: 2009/02/17 18:42:22
- Status: offline
- Ribbons : 132
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/29 15:35:06
(permalink)
snooooze
I'm Confused...I think you need to edit your titles to the pics in post #96 stray
The second one should say "Enabled"
|
Stray_Bullet
iCX Member
- Total Posts : 389
- Reward points : 0
- Joined: 2008/07/12 22:09:13
- Location: New York, USA
- Status: offline
- Ribbons : 8
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/29 18:07:50
(permalink)
KTOOOOM
first thank you for your reply
so i should increase tRc from 27 to 31
and bump up the voltage little bit
then i will do after testing the 190.68 driver
I would at least change the tRC, as having it too low can cause errors & corruption of data. If I was you I would Put P1 & P2 to enabled & bump the SPP voltage up a notch then test. But that is just me, in fact, I would be running 1600 link/sync if it was me... lol I run my OCZ's in my server @ 1600 with P1 & P2 enabled @ 1.95v 7-7-7-24-2t 6-31-12-14-19-7.8uS-90 VistaHead
snooooze
I'm Confused...I think you need to edit your titles to the pics in post #96 stray
The second one should say "Enabled"
Fixed lol. That is so funny I been playing with my new 3x 275's & I ran vantage & I was like what??? My score went down??? Then I realized I had my P1 & P2 still on auto... Believe it or not, I enabled those settings & gained 2000 points in vantage... Vantage = P32,020 
My Machine: *Antec 1200 Case *EVGA 790i FTW|SZ16|nForce 15.58 *Q9650 @ 4.275 GHz Linked/Sync @ 1900 MHz *Prolimatech Megahalems CPU Cooler *Patriot 2x2GB PVS34G2000LLKN 8-8-8-23-2t|8-40-12-17-23-7.8uS-110 (black slots) *BFG 1000 Watt PSU *3x GTX 275|Forceware 270.61 *On-board Sound card|5.1 Surround *2 WD VelociRaptors|RAID 0 * 7 x64 790i BIOS Template| Critical Damage Incorporated
|
Thenax
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2009/11/26 08:32:12
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/30 04:19:48
(permalink)
Been reading all of this thread. I got the EVGA 790I FTW. I also get the random crashes. (ive never had BSOD before tho)
Tho in my situation it seems like it's as random as it can be with the crashes. Sometimes several days pass by without crashes, other times, 5 times a day. Both when playing, watching medie, surfing the net etc. Basicly everything. When it freezes, i can't move anything. Mouse, keyboard, everything is stuck. and it will keep repeating the sound i heard for the last 5 sec in the speakers. Only thing to do is a psysically restart.
I have Corsair XMS DDR3 1333, 9-9-9-24 passing 28 hours of memtest without a single error.
Got the latest bios drivers (tried flashing back to old ones, same freezes) tried older and newer version of Nvidia Drivers for GFX, same thing. been playing a bit around with different voltage that seems to have helped the problem in the matter of it takes more than 6 hours between each crash.
So i don't think that Ktooms ram is the problem in the freeze cases. Think ure just having the same problems as, what is seems 98% of the ppl with a 790I have. I haven't found a solution to this yet, but if i do ill ofc post it here.
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/30 11:19:43
(permalink)
Thenax
Been reading all of this thread. I got the EVGA 790I FTW. I also get the random crashes. (ive never had BSOD before tho)
Tho in my situation it seems like it's as random as it can be with the crashes. Sometimes several days pass by without crashes, other times, 5 times a day. Both when playing, watching medie, surfing the net etc. Basicly everything. When it freezes, i can't move anything. Mouse, keyboard, everything is stuck. and it will keep repeating the sound i heard for the last 5 sec in the speakers. Only thing to do is a psysically restart.
I have Corsair XMS DDR3 1333, 9-9-9-24 passing 28 hours of memtest without a single error.
Got the latest bios drivers (tried flashing back to old ones, same freezes) tried older and newer version of Nvidia Drivers for GFX, same thing. been playing a bit around with different voltage that seems to have helped the problem in the matter of it takes more than 6 hours between each crash.
So i don't think that Ktooms ram is the problem in the freeze cases. Think ure just having the same problems as, what is seems 98% of the ppl with a 790I have. I haven't found a solution to this yet, but if i do ill ofc post it here.
WOW will im gonna try thanks for the post
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
thornev
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2009/09/15 03:51:40
- Location: Hudson Valley, NY
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/30 13:01:55
(permalink)
I just tried P1/P2 on Auto and Enabled and got only marginally better results with Enabled (1600MHz linked and synched):
Auto/Enabled...
mem read: 10558/10569
mem write: 8486/8489
mem copy: 8419/8398
latency: 57.8/56.9
Mobo: EVGA nForce 790i Ultra Sli, BIOS P09/ CPU: Intel Core2 Quad Q9550 E0 stepping 2.83GHZ 1333FSB, OCed @ 3.8GHz (1800 FSB/1500 RAM @ 1T) / OS: Windows 7 Pro x64 / HDD: Seagate (SATA I) 200GB / HDD: WD (IDE) WD2500JB / HDD: WD (SATA I) WD5000AACS / HDD: WD (SATA I) WD2500JD / HDD: WD (SATA II) WD3200AAKS (Win7 boot drive) / DVD: SATA HP dvd1260 / Power: Xion SuperNova 800W 12V / CPU fan: Corsair H50 liquid cooling, 2 fans / Video: 1 x BFG Geforce 9800GTX 512MB PCI-E, OCed @ 811-2028-1177 / RAM: OCZ OCZ3N1800SR4GK 4GB (2x2GB) DDR3 PC3-14400 1800MHZ 8-8-8-24, UCed @ 8-7-7-23-1T / Case: Thermaltake Shark VA7000BWA
|
Stray_Bullet
iCX Member
- Total Posts : 389
- Reward points : 0
- Joined: 2008/07/12 22:09:13
- Location: New York, USA
- Status: offline
- Ribbons : 8
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/30 13:23:22
(permalink)
Thenax
Been reading all of this thread. I got the EVGA 790I FTW. I also get the random crashes. (ive never had BSOD before tho)
Tho in my situation it seems like it's as random as it can be with the crashes. Sometimes several days pass by without crashes, other times, 5 times a day. Both when playing, watching medie, surfing the net etc. Basicly everything. When it freezes, i can't move anything. Mouse, keyboard, everything is stuck. and it will keep repeating the sound i heard for the last 5 sec in the speakers. Only thing to do is a psysically restart.
I have Corsair XMS DDR3 1333, 9-9-9-24 passing 28 hours of memtest without a single error.
Got the latest bios drivers (tried flashing back to old ones, same freezes) tried older and newer version of Nvidia Drivers for GFX, same thing. been playing a bit around with different voltage that seems to have helped the problem in the matter of it takes more than 6 hours between each crash.
So i don't think that Ktooms ram is the problem in the freeze cases. Think ure just having the same problems as, what is seems 98% of the ppl with a 790I have. I haven't found a solution to this yet, but if i do ill ofc post it here.
Just out of curiousity what kind of video card(s) do you have? I been playing with my new 275's & they do not like to be pushed hard. If I go too much on my OC, I run furmark & comp just locks up... can't do anything... But I got the FTW & can look in my case & see there is hard drive activity... I pressed ctrl, alt,delete a few times. Wait like a minute or two & the screen comes up, I start task manager, end furmark & it pops up nvidia driver not responding... I have to disable sli & re enable sli, to get all 3 of my cards to run again. So pretty much video drivers can freeze your comp too.... Like yesterday I pushed my clocks, they ran furmark... Started MW2, played a round, beginning of next round it locked back up... Lowered my GPU clocks & no lockups! thornev
I just tried P1/P2 on Auto and Enabled and got only marginally better results with Enabled (1600MHz linked and synched):
Auto/Enabled...
mem read: 10558/10569
mem write: 8486/8489
mem copy: 8419/8398
latency: 57.8/56.9
I think maybe you didn't save it in the bios after you changed it? My processor & memory linked & synced @1900 FSB gets less then 9000 on memory read, with those settings on Auto. I don't think yours got 10000+, unless that was while it was enabled!
My Machine: *Antec 1200 Case *EVGA 790i FTW|SZ16|nForce 15.58 *Q9650 @ 4.275 GHz Linked/Sync @ 1900 MHz *Prolimatech Megahalems CPU Cooler *Patriot 2x2GB PVS34G2000LLKN 8-8-8-23-2t|8-40-12-17-23-7.8uS-110 (black slots) *BFG 1000 Watt PSU *3x GTX 275|Forceware 270.61 *On-board Sound card|5.1 Surround *2 WD VelociRaptors|RAID 0 * 7 x64 790i BIOS Template| Critical Damage Incorporated
|
thornev
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2009/09/15 03:51:40
- Location: Hudson Valley, NY
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/30 14:12:58
(permalink)
I think maybe you didn't save it in the bios after you changed it?
My processor & memory linked & synced @1900 FSB gets less then 9000 on memory read, with those settings on Auto. I don't think yours got 10000+, unless that was while it was enabled!
Well I can't say if the BIOS did indeed save the settings, but I know I pressed F10 and responded "Y" to saving the settings. Obviously it isn't only the P1/P2 settings that determine the speed. Memory timings (which I didn't post) have more to do with speed I would guess which explains the difference between your and my benchmark results. thorne
post edited by thornev - 2009/12/30 14:15:09
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 06:52:41
(permalink)
OK update
i tryed the following setting
1- CPU Core=Auto
FSB=1.40
MEM=1.90
SPP=1.42
MCP=1.55
linked and synced @1333 and P1&P2 @ auto
7-7-7-24-2T
FREEZE
2-the same as 1 but MEM voltage @ 2.0 and FREEZE
now I am on this setting
CPU Core=1.40
FSB=1.475
MEM=1.95
SPP=1.47
MCP=1.60
linked & Synced @1600 and P1&P2= Enabled
7-7-7-24-2T @1.95
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 06:55:01
(permalink)
and to let you know guys this never happened on XP i mean the freezing
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
VistaHead
Omnipotent Enthusiast
- Total Posts : 9357
- Reward points : 0
- Joined: 2009/02/17 18:42:22
- Status: offline
- Ribbons : 132
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:02:58
(permalink)
KTOOOOM, get some new RAM. OCZ is just too problematic and hit or miss with the 790i chipset.
|
VistaHead
Omnipotent Enthusiast
- Total Posts : 9357
- Reward points : 0
- Joined: 2009/02/17 18:42:22
- Status: offline
- Ribbons : 132
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:07:26
(permalink)
You have made so many changes that I have no idea what your settings are at this time. Please post another completely filled out BIOS template. To keep us from having to search this thread, please include the settings and voltage as written on the sticks. I am assuming that you are running 4GB (2 X 2GB). Please list what version video card driver you are currently using. If memory serves me correctly, you already tested your RAM for 8 hours each stick.
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:12:23
(permalink)
VistaHead
KTOOOOM, get some new RAM. OCZ is just too problematic and hit or miss with the 790i chipset.
as soon as they available
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
VistaHead
Omnipotent Enthusiast
- Total Posts : 9357
- Reward points : 0
- Joined: 2009/02/17 18:42:22
- Status: offline
- Ribbons : 132
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:16:03
(permalink)
KTOOOOM
VistaHead
KTOOOOM, get some new RAM. OCZ is just too problematic and hit or miss with the 790i chipset.
as soon as they available
Understood. Please read post # 10 carefully and provide all of the information so that we can see what we can do for you with the RAM that you have. We haven't given up on you yet. 
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:22:06
(permalink)
VistaHead
You have made so many changes that I have no idea what your settings are at this time. Please post another completely filled out BIOS template. To keep us from having to search this thread, please include the settings and voltage as written on the sticks. I am assuming that you are running 4GB (2 X 2GB). Please list what version video card driver you are currently using. If memory serves me correctly, you already tested your RAM for 8 hours each stick.
my ram Timing as written on the sticks is 7-7-7-24@1.9v i have One Stick of ram 2GB Part # OCZ3P16002G BIOS next post
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:24:43
(permalink)
something ..............
post edited by KTOOOOM - 2009/12/31 07:47:19
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:26:13
(permalink)
i coloured the Template but something going on with the Post editor
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
VistaHead
Omnipotent Enthusiast
- Total Posts : 9357
- Reward points : 0
- Joined: 2009/02/17 18:42:22
- Status: offline
- Ribbons : 132
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:26:31
(permalink)
Edit your above post and provide the numeric values for the following settings ; RRD: [Auto] tRC: [Auto] tWR: [Auto] tWTR: [Auto] tFAW: [Auto]
post edited by VistaHead - 2009/12/31 07:28:54
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:47:46
(permalink)
BIOS: DZ19
**System **
CPU Freq, MHz: 3.4 GHz
FSB Reference Clock, MHz: 1600
CPU Multiplier: [8X] 8.5
PCle x16-1 & 16-2, MHz: [100]
PCle x16-3, MHz: [100]
SPPc->MCP Ref Clock, MHz: [200]
nForce SPP --> nForce MCP: [5X]
nForce SPP c-- nForce MCP: [5X]
**Spread Spectrum**
CPU Spread Spectrum: [Disabled]
HT Spread Spectrum: [Disabled]
PCle Spread Spectrurn(SPP): [Disabled]
PCle Spread Spectrurn(MCP): [Disabled]
SATA Spread Spectrum: [Disabled]
**FSB & Memorv Config**
FSB - Memory Clock Mode: [linked]
FSB - Memory Ratio: Synced
FSB (QDR), MHz: [1600]
Actual FSB (QDR), MHz: 1600
x MEM (DDR), MHz: 1600
Actual MEM (DDR), MHz: 1600
P1: [Enabled]
P2: [Enabled]
**Memory Timing Setting**
Memory Timing Setting: [EX]
tCL (CAS Latency): 7
tRCD: 7
tRP: 7
tRAS: 24
Command Per Clock: [2T]
** Advanced Memory Settings **
tRRD: [Auto] 6
tRC: [Auto] 40
tWR: [Auto] 12
tWTR: [Auto] 18
tFAW: [Auto] 25
tREF: [7.8us]
tRFC: AUTO 110
**System Voltages**
CPU Core: [1.40]
CPU FSB: [1.475]
Memory: [1.95]
nForce SPP: [1.47]
nForce MCP: [1.60]
GTLVREF Lane 0: [Auto] -30mv
GTLVREF Lane 1: [Auto] +10mv
GTLVREF Lane 2: [Auto] +00mv
GTLVREF Lane 3: [Auto] +00mv
[**CPU Configuration**
Limit CPUlD Maxval: Disabled
Intel Speedstep: Disabled
xPPM Mode: [Native]
CPU Thermal Control: [Disabled]
C1E Enhanced Halt State: [Disabled]
Execute Disable Bit: [Enabled]
Virtualization Technology: [Disabled]
CPU Core 0: [Enabled]
CPU Core 1: [Enabled]
CPU Core 2: [Enabled]
CPU Core 3: [Enabled]
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:48:54
(permalink)
GOD what is wrong with the post editor ?
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|
VistaHead
Omnipotent Enthusiast
- Total Posts : 9357
- Reward points : 0
- Joined: 2009/02/17 18:42:22
- Status: offline
- Ribbons : 132
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:54:09
(permalink)
post deleted.
post edited by VistaHead - 2009/12/31 07:56:50
|
KTOOOOM
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2009/05/27 11:53:11
- Status: offline
- Ribbons : 0
Re:790I FTW D freeze and lockups please helllllllp.. VistaHead bring your guns here..@Upda
2009/12/31 07:56:47
(permalink)
VistaHead
You are running 2GB of RAM (2 X 1GB), or is your signature incorrect?
i am running 1 X 2GB ram one stick 2GB
Intel Q9550 2.8 GHz ...3.40 Zalman CPU Cooler 9700LED EVGA 790i FTW DIGITAL GeForce GTX 275 Patriot Viper 4GB @1600Mhz WD 1TB + WD 300 GB (OS) ThermalTake ToughtPower 1200w modular Win 7 Ultimate CM HAF 932
|