Halo_003

RaisingCain

Hmmm wonder if my 9650 can do 5...

Probably not on water. Sandy Bridge is the only real shot at 5Ghz stable.

My 960 can do 4.8 bench stable though.. On water. But I'd need subzero to get the 5500Mhz it once did on LN2. 

 
I could get my Q9650 to 4.3 or something like that.. I think 5ghz is unreachable on that cpu, sorry..

warlord420

IstBarP

warlord420

i personaly hate you!

i have mine at 1.38-1.4 for a 4.7 ghz :(

you have the awsomeness of all awsome batch

me or doorules? :P..
but yea i guess mine is pretty awesome , even though i have no clue what my batch is XD

edit: my batch is L104A387 (written on box that cpu came in), but can't find anything on google or on overclocker forums :/  

you sir!

i had frys exchange my 2500k 4 times and this is the best batch

 
oh at the moment u wrote that you didn't even know my batch.. but in post #2 u can see my batch! :).. 

i tell u it is good! :).. i am at 5.1 ghz (been at 5.2 ghz) and havn't even changed my pll voltage yet! :).. i put it back to std and i am still good! :)..

but i found out that 5.1 is the limit for my CPU cooling device! :)..
my cpu can to go higher but my cooling ain't happy  
guess i should be happy that i am at 5.1 stable, without any cooling problems (86 degrees max at linx runs.. !  
 
should see how far i can get it to boot.. i can easily go 5.2, had it bootable but can't go linx, cause my temps are in 89'ish area.. don't dare to go higher! :(.. have to exchange my thermal paste i guess.. and put my computer closer to the window! ;).. (cold outside at the moment, like 10 degrees celcius! :)

doorules

[PIC]
http://valid.canardpc.com...id=1870900  

WOW!

IstBarP

warlord420

IstBarP

warlord420

i personaly hate you!

i have mine at 1.38-1.4 for a 4.7 ghz :(

you have the awsomeness of all awsome batch

me or doorules? :P..
but yea i guess mine is pretty awesome , even though i have no clue what my batch is XD

edit: my batch is L104A387 (written on box that cpu came in), but can't find anything on google or on overclocker forums :/  

you sir!

i had frys exchange my 2500k 4 times and this is the best batch

oh at the moment u wrote that you didn't even know my batch.. but in post #2 u can see my batch! :).. 

i tell u it is good! :).. i am at 5.1 ghz (been at 5.2 ghz) and havn't even changed my pll voltage yet! :).. i put it back to std and i am still good! :)..

but i found out that 5.1 is the limit for my CPU cooling device! :)..
my cpu can to go higher but my cooling ain't happy  
guess i should be happy that i am at 5.1 stable, without any cooling problems (86 degrees max at linx runs.. !  

should see how far i can get it to boot.. i can easily go 5.2, had it bootable but can't go linx, cause my temps are in 89'ish area.. don't dare to go higher! :(.. have to exchange my thermal paste i guess.. and put my computer closer to the window! ;).. (cold outside at the moment, like 10 degrees celcius! :)

 
i was talking about my batch being best out of the the 4 exchanges
the last time i  called my bank infront of them and i asked them to challenge the charge. and the manager was like okay fine ONE LAST TIME.
 
only if INTEL FTW  version existed hhaha
i mean my temps are in the 60's running LinX but in Los Angeles gets hot hopefully the new H100 from corsair does a phenomenal job then i will beat your clock speeds
 
cheers
 
 
 

warlord420
i was talking about my batch being best out of the the 4 exchanges
the last time i  called my bank infront of them and i asked them to challenge the charge. and the manager was like okay fine ONE LAST TIME.

only if INTEL FTW  version existed hhaha
i mean my temps are in the 60's running LinX but in Los Angeles gets hot hopefully the new H100 from corsair does a phenomenal job then i will beat your clock speeds

cheers

nice.. i am pretty happy with my batch..! :).. i will look forward to the H100 benching! :).. if that is MUCH better, i would buy it just for the sake of it! :).. then i know i can reach higher clocks! :).. 

it is the Power that i am worried about.. just the 1.5 is worrying me like hell, that is way above what the old cpu's (quadcores) would need to overclock! :(.. 

i am at 1.48 for my 5.1 Ghz Stable!!! for me that is high,, but the only experience i got with overclock is pretty much this motherboard (had a little overclock [i had a q6600 running 2.8 instead of 2.4] with my old LGA 775).. 

so for me breaching the 5 ghz wall and even get 5.1 stable is like  

but still i am sitting here thinking i want more, more, more!! more ghz, more power, more speed!!! 

the 5.5 was for cupid validation only , linX will not run at that voltage at that clock, more vcore required for that...
 for short periods of time I don't mind the vcore so much as I watch my temps, they dictate how far I will go more so than vcore...
 I can run both vantage and 3d mark 11 at 5.4 without any problems at all, neither puts much of a load on the cpu,
    Just as side note, have the chip on a Heatkiller Rev 3.0 now, load temps are very nice but I am surprised by how well the corsair H70 did for me. At idle I am now at 28-29-29-30 with vcore at 1.392, clocked at 4.8 mhz, my 24/7 settings. On the H70 the idle temps were only 3-5' higher, and under load it fell off a little more but still dam impressive in my view for what it is

IstBarP

warlord420
i was talking about my batch being best out of the the 4 exchanges
the last time i  called my bank infront of them and i asked them to challenge the charge. and the manager was like okay fine ONE LAST TIME.

only if INTEL FTW  version existed hhaha
i mean my temps are in the 60's running LinX but in Los Angeles gets hot hopefully the new H100 from corsair does a phenomenal job then i will beat your clock speeds

cheers

nice.. i am pretty happy with my batch..! :).. i will look forward to the H100 benching! :).. if that is MUCH better, i would buy it just for the sake of it! :).. then i know i can reach higher clocks! :).. 

it is the Power that i am worried about.. just the 1.5 is worrying me like hell, that is way above what the old cpu's (quadcores) would need to overclock! :(.. 

i am at 1.48 for my 5.1 Ghz Stable!!! for me that is high,, but the only experience i got with overclock is pretty much this motherboard (had a little overclock [i had a q6600 running 2.8 instead of 2.4] with my old LGA 775).. 

so for me breaching the 5 ghz wall and even get 5.1 stable is like  

but still i am sitting here thinking i want more, more, more!! more ghz, more power, more speed!!! 

 
i totaly understand dude OC is pretty addictive and now days you dont need a fancy 200-300 motherboard to get nice OC results. I am worried about thoese voltages because its 32 nm
the smaller things get the more fragile they become.
 
i had my e6600 dual core from 2.4 ghz to 3.75 i bumped the voltage from 1.35 default to 1.375 lolz! the highest EVGA board let me go
surprisingly its alive today after 3 years of that on air cooling
 
 
P.S. if you wake up tomamrow and see your cooler is hanging outside and your cpu bracket is empty DO NOT come after me

IstBarP

mistermister

Let it be known. I hate you all, and I am jealous.

yea, i am sorry to tell you, but i don't think u will ever hit that 5 ghz mark! ;)..
but i am quite jealous of your hyperthreading :P.. cant fold Bigadv without! :/  

watch me do it once i get of my arse and OC the hell out of this 980X 

No bug mate people get much higher FSB than this, It's an easy task to get that out of an E8400 core 2..
example ..http://valid.canardpc.com/show_oc.php?id=760169

IstBarP

bigrelly

No bug mate people get much higher FSB than this, It's an easy task to get that out of an E8400 core 2..

i rest my case.. bug! ^^
i think that is a bug!.. like the one i linked right in the last post too!  

but again.. if u look at the 1.9 volts in the one i posted.. hmmm 

LOL why do you say its a bug?? My cpu volts were at 1.65 in bios and not many baords get that high FSB except gigabyte ep45 extreems and some others ..... 

Here's my entry 
i used intel burntest cause linX wasnt doing anything. But from what ive read they are the same with a different GUI so hopefully this counts. I made 20 passes on the high setting.
 
 
 
  
edit 2: New image with the core speed still at 5.0

cblaxx 

Here's my entry  
i used intel burntest cause linX wasnt doing anything. But from what ive read they are the same with a different GUI so hopefully this counts. I made 20 passes on the high setting. 
[image]

edit: just saw that cpu-z is showing the idle speed since it finished the runs.  

 
 
sorry i hope you can make another screenshot.. can't see anywhere that it goes 5ghz! :(.. except u wrote it :).. do another run! hope u can! :).. if u can u are on the list ! ;).. (it is about 15 min of linx) :).. i know it is terrible wait time! :)
just take a screen right before it finishes! :).. or use something (i used superpi) to hold up the clockspeed efter the linx test :)..
 

BiLLie=WhiZz

Hi dudes i am new to this game but i have a great rig which is not overclocked ? my rig is
980x intel
rampage 3 m/board
corsair dominator ram 8 gbs
ati 5900 xfx cards times 2
psu is thermaltake 1500 watt
case is cosmos pure
souhd creative x-fi professional
monitor BenQ 24in HDMI
ALL WATER COOLED

post a screenpic like i did on the first post! :).. you can use intel burn test instead of linx , but you still need those other things that is required ;).. 

muskie32

I got to 5.4.  And this was on a H60...  I need to set up my LN2 bench =/

http://valid.canardpc.com/show_oc.php?id=1873115

 
post screen shots! :)

hey man u seem to b the dude for overclocking have a look at my rig tell me what u think plz ? never did this b4