3DMark11 installed, run vantage yet?

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
squall-leonhart
CLASSIFIED Member
  • Total Posts : 2110
  • Reward points : 0
  • Joined: 2009/07/27 19:57:03
  • Location: Australia
  • Status: offline
  • Ribbons : 7
Re:3DMark11 installed, run vantage yet? 2010/12/08 08:59:35 (permalink)
system restore is unrequired, Sysinfo has an uninstaller in programs and features, reinstalling Vantage after removing the '11 version of sysinfo will install the vantage version.

 
CPU:Intel i7 920 @ 3.8(D0), Mainboard:Asus Rampage II Gene, Memory:12GB Corsair Vengeance 1600
Video:EVGA Geforce GTX 680+ 4GB, Sound:Creative XFI Titanium Fatal1ty Pro, Monitor:BenQ G2400WD
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Guardian 921RB, PSU:Corsair 620HX, OS:Windows 7 SP1
#31
Sum1uNo83
CLASSIFIED Member
  • Total Posts : 2692
  • Reward points : 0
  • Joined: 2009/04/14 19:57:32
  • Location: Florida
  • Status: offline
  • Ribbons : 12
Re:3DMark11 installed, run vantage yet? 2010/12/08 09:00:40 (permalink)
squall-leonhart

system restore is unrequired, Sysinfo has an uninstaller in programs and features, reinstalling Vantage after removing the '11 version of sysinfo will install the vantage version.

 
either way falcon's fix worked, so i will stick with that. thanks

                                       
                                                           
#32
squall-leonhart
CLASSIFIED Member
  • Total Posts : 2110
  • Reward points : 0
  • Joined: 2009/07/27 19:57:03
  • Location: Australia
  • Status: offline
  • Ribbons : 7
Re:3DMark11 installed, run vantage yet? 2010/12/08 09:02:28 (permalink)
System restore takes much longer to perform and isn't fool proof (as much as it improved over XP's).

 
CPU:Intel i7 920 @ 3.8(D0), Mainboard:Asus Rampage II Gene, Memory:12GB Corsair Vengeance 1600
Video:EVGA Geforce GTX 680+ 4GB, Sound:Creative XFI Titanium Fatal1ty Pro, Monitor:BenQ G2400WD
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Guardian 921RB, PSU:Corsair 620HX, OS:Windows 7 SP1
#33
Sum1uNo83
CLASSIFIED Member
  • Total Posts : 2692
  • Reward points : 0
  • Joined: 2009/04/14 19:57:32
  • Location: Florida
  • Status: offline
  • Ribbons : 12
Re:3DMark11 installed, run vantage yet? 2010/12/08 09:06:14 (permalink)
squall-leonhart

System restore takes much longer to perform and isn't fool proof (as much as it improved over XP's).

 
worked fine for me and good to go. im sure your way works as well. user prefference IMO.

                                       
                                                           
#34
Johnny_Utah
CLASSIFIED Member
  • Total Posts : 4330
  • Reward points : 0
  • Joined: 2008/02/13 16:26:04
  • Status: offline
  • Ribbons : 5
Re:3DMark11 installed, run vantage yet? 2010/12/08 09:09:55 (permalink)
z3r0t0l0rence

farthestkris

managed to squeeze out P6806   http://3dmark.com/3dm11/42062?show_ads=true&page=/3dm11/42062%3Fkey%3DwwWnLHE5S2H9fpcTUhjz5HnwXmkBwT


Odd that your memory is running @667 according to your 3DMark results.  Isn't that DDR3 that you have?  Just doesn't look right IMO!

 
Not only that, but is it intended to report downclocked power-saving mode?  It shows his core @ 50MHz and Memory @135MHz.

5930k (H20)  //  ASUS Rampage V Extreme
EVGA Titan SC x 4 (H20)
Gskill Ripjaws 2400
 EVGA 1600G2 //  DD Torture Rack
 
 
#35
Sum1uNo83
CLASSIFIED Member
  • Total Posts : 2692
  • Reward points : 0
  • Joined: 2009/04/14 19:57:32
  • Location: Florida
  • Status: offline
  • Ribbons : 12
Re:3DMark11 installed, run vantage yet? 2010/12/08 09:38:10 (permalink)
Johnny_Utah

z3r0t0l0rence

farthestkris

managed to squeeze out P6806   http://3dmark.com/3dm11/42062?show_ads=true&page=/3dm11/42062%3Fkey%3DwwWnLHE5S2H9fpcTUhjz5HnwXmkBwT


Odd that your memory is running @667 according to your 3DMark results.  Isn't that DDR3 that you have?  Just doesn't look right IMO!


Not only that, but is it intended to report downclocked power-saving mode?  It shows his core @ 50MHz and Memory @135MHz.

 
same here :  http://3dmark.com/3dm11/10355

                                       
                                                           
#36
d1eseL
FTW Member
  • Total Posts : 1077
  • Reward points : 0
  • Joined: 2007/04/11 17:55:13
  • Status: offline
  • Ribbons : 2
Re:3DMark11 installed, run vantage yet? 2010/12/08 11:05:28 (permalink)
rjohnson11

To overcome the failed Physics test go into the help menu of 3D Mark 11 and untick the box that says to Scan Systeminfo and try again. This seems to work.


If I untick that box I get 9 fps in the combined test.  If I leave it ticked I get 41 fps.  Every time.

MOBO: X58 E760 Classy | CPU: i7 980X | GPUs: 3xGTX 470 Tri SLI w/Koolance blocks | MEM: Dominator GT 2000mhz | PSU's: Corsair TX950w, CoolerMaster Silent Pro 1000w | OS: Win 7 Pro
    
#37
Johnny_Utah
CLASSIFIED Member
  • Total Posts : 4330
  • Reward points : 0
  • Joined: 2008/02/13 16:26:04
  • Status: offline
  • Ribbons : 5
Re:3DMark11 installed, run vantage yet? 2010/12/08 11:11:07 (permalink)
From the responses on the FM forums, it appears that only people with SLI are having problems with the sysinfo being overwritten and vantage then being corrupted.  Pinto (FM Forums) has a possible fix:
 
PINTO:
"The problem appears on sli rig only but there is a solution!
It solve the combined test problem on sli setup too:

-download nvidia inspector
-click on the button near the driver name
-it open a new screen
-in the first group of keys modify the Sli compatibility bits(DX10) from 0X00000000 to 0X008000F5
-apply change
-run your bench as usual

for me it works great increase the combined test from 10fps to 40 and run Vantage great artefact free"
 
http://futuremark.yougame...hp?t=139008&page=2
 
Hope this helps guys.
 
 
 

5930k (H20)  //  ASUS Rampage V Extreme
EVGA Titan SC x 4 (H20)
Gskill Ripjaws 2400
 EVGA 1600G2 //  DD Torture Rack
 
 
#38
Sum1uNo83
CLASSIFIED Member
  • Total Posts : 2692
  • Reward points : 0
  • Joined: 2009/04/14 19:57:32
  • Location: Florida
  • Status: offline
  • Ribbons : 12
Re:3DMark11 installed, run vantage yet? 2010/12/08 11:39:25 (permalink)
hmm will check that out, also yes its only SLI seups, we forgot to mention that in our prior posts. thats how we found it.

                                       
                                                           
#39
rjbarker
FTW Member
  • Total Posts : 1904
  • Reward points : 0
  • Joined: 2008/03/20 10:07:05
  • Location: Vancouver Isle - Westcoast Canada
  • Status: offline
  • Ribbons : 10
Re:3DMark11 installed, run vantage yet? 2010/12/08 12:01:27 (permalink)
jr.....please let us know how you make out with the above "fix".....

I7 3930K @ 4.9 Ghz  w EK Supremacy
ASUS RIVE w 16GB Dominator 1866 9-10-9-27 1T
2 GTX 780Ti 3 GB SLi w EK Full WB's
SSD - 1 Intel 120 GB - 1 x Vertex II 240 GB (OS n Games) / 2 x WD Black 640GB (Data)
AX 1.2 kW
Corsair 900D w Lamptron FC9 Controller & XSPC 480 / 360 / 240 Rads

Photon 170 Combo - Dell U2711 2560x1440  
MK11: P25,113
http://www.3dmark.com/3dm11/7499603
Firestrike: 19,985
http://www.3dmark.com/fs/2241462

 
#40
Johnny_Utah
CLASSIFIED Member
  • Total Posts : 4330
  • Reward points : 0
  • Joined: 2008/02/13 16:26:04
  • Status: offline
  • Ribbons : 5
Re:3DMark11 installed, run vantage yet? 2010/12/08 12:29:25 (permalink)
I just tried this fix.  When I apply changes, the nvidia inspector crashes.  I wonder if I need to create a new profile instead of modifying this one.  I am continuing to explore.  I will report back.
 
Edit:  Silly me, I had afterburner running the background.  Once I stopped AB from running, base profile changed easily.
post edited by Johnny_Utah - 2010/12/08 12:37:18

5930k (H20)  //  ASUS Rampage V Extreme
EVGA Titan SC x 4 (H20)
Gskill Ripjaws 2400
 EVGA 1600G2 //  DD Torture Rack
 
 
#41
Quagmire LXIX
ACX Member
  • Total Posts : 265
  • Reward points : 0
  • Joined: 2010/11/16 20:50:21
  • Status: offline
  • Ribbons : 2
Re:3DMark11 installed, run vantage yet? 2010/12/08 12:40:38 (permalink)
squall-leonhart

system restore is unrequired, Sysinfo has an uninstaller in programs and features, reinstalling Vantage after removing the '11 version of sysinfo will install the vantage version.

idk if I have this issue yet, but I appreciate the heads up as I am one that turns off system restore. It could save me from going back a system image before 3D11 was installed, then again, giving the theasco that it is, it might not be a bad idea
 
There is way too much fixing going on for soemthing that was delayed for fixing
post edited by Quagmire LXIX - 2010/12/08 12:43:36

QuagsQube: i7-980x 4GHz / SLI 680 (1247-33MHz/6502MHz) / Rampage III Formula / 6GB GSkill 12800  / AX1200 / U2-UFO Case / RealSSD C300 128GB / Watercooled / 6010x1080

Laptop: Alienware M17x-R4 / i7-3610qm / 7970m / 16GB Vengeance PC12800 / 256MB Plextor M3 SSD / 1920x1080 / Sony BD Burner

5% Club

#42
Q56_Monster
CLASSIFIED Member
  • Total Posts : 3846
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:3DMark11 installed, run vantage yet? 2010/12/08 12:50:42 (permalink)
Johnny_Utah

From the responses on the FM forums, it appears that only people with SLI are having problems with the sysinfo being overwritten and vantage then being corrupted.  Pinto (FM Forums) has a possible fix:

PINTO:
"The problem appears on sli rig only but there is a solution!
It solve the combined test problem on sli setup too:

-download nvidia inspector
-click on the button near the driver name
-it open a new screen
-in the first group of keys modify the Sli compatibility bits(DX10) from 0X00000000 to 0X008000F5
-apply change
-run your bench as usual

for me it works great increase the combined test from 10fps to 40 and run Vantage great artefact free"

http://futuremark.yougame...hp?t=139008&page=2

Hope this helps guys.




 
Good to know...I'm not running SLi yet, so that's why I don't have the problem.  Thanks.

Mobo: tbd CPU: tbd
GPU: tbd
RAM: tbd HD: tbd
PSU: 2 x PC Power & Cooling 1200W OS: All of them
Monitor: Whatever  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 

#43
Johnny_Utah
CLASSIFIED Member
  • Total Posts : 4330
  • Reward points : 0
  • Joined: 2008/02/13 16:26:04
  • Status: offline
  • Ribbons : 5
Re:3DMark11 installed, run vantage yet? 2010/12/08 12:53:47 (permalink)
I used the fix, ran mark11 and this is what I got:
 
http://3dmark.com/3dm11/66385
 
Seems a bit low, but whatever.  Look at the different scores, for graphics, physics then combined.  Is something wrong here?
 
Edit:  Ran Vantage immediately after mark11, no artifacts/tearing/crashing.  It appears this fix might indeed work until patch is issued.
Score from Vantage run:  http://3dmark.com/3dmv/2783198
post edited by Johnny_Utah - 2010/12/08 13:16:53

5930k (H20)  //  ASUS Rampage V Extreme
EVGA Titan SC x 4 (H20)
Gskill Ripjaws 2400
 EVGA 1600G2 //  DD Torture Rack
 
 
#44
Johnny_Utah
CLASSIFIED Member
  • Total Posts : 4330
  • Reward points : 0
  • Joined: 2008/02/13 16:26:04
  • Status: offline
  • Ribbons : 5
Re:3DMark11 installed, run vantage yet? 2010/12/08 15:17:19 (permalink)
Also, I am running 2D surround and currently, this is broken as well.  I get a sliver in the middle of one screen no matter if I use 5760x1080 or anything else.  I was a "little" upset about all the failed support.  I immediately contacted FM, here is the link to my conversation with FM_Jarnis, and another owner Patrick asking questions:
 
http://getsatisfaction.co...s_not_working_properly
 
I was a bit mean in my second reply, but darnit, someone here FAILED.  There was an obvious disconnect with Nvidia and FM.  Both are to blame in my book.  According to the info in the above link, FM had limited access to the 580's...
 
 

5930k (H20)  //  ASUS Rampage V Extreme
EVGA Titan SC x 4 (H20)
Gskill Ripjaws 2400
 EVGA 1600G2 //  DD Torture Rack
 
 
#45
AHowes
FTW Member
  • Total Posts : 1546
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 1
Re:3DMark11 installed, run vantage yet? 2010/12/09 21:29:56 (permalink)
Johnny, i've been using Vantage lately while just havin the res set at 1920x1080 after i've already set it up for 3 screens while benching.
 
Back when i would run it while having the res set for tripple screen but it annoyed me as it would turn the other 2 screens on and off inbetween the bench sceens. THat plus i figured the system would bench higher not runing all that memory for tripple screens at the time for benches.. I just changed the screen res to 1920x1080.. When i'm done benching i can just change the res back to the max and all 3 screens would be back up.
 
I've done the same for 3Dmark11 as well.. no probs runing the bench when i only have 1 screen up as i have the desktop res set to 1920x1080.
 

  
Intel i7 6700K Custom Water Cooled
Asus Z170 Maximus VII Hero  
G.Skill 16GB 3600MHz DDR4 15,15,15 
Samsung 950 Pro 512GB/Samsung 500GB Evo
EVGA 1080 Classified SLI Water Cooled   
27" Asus ROG SWIFT 1440 165Hz 
EVGA SuperNova G2 1000WATT P/S 
Thermaltake Core X9 Case w/ EK Cooling
#46
farthestkris
CLASSIFIED Member
  • Total Posts : 4109
  • Reward points : 0
  • Joined: 2009/03/30 15:54:27
  • Location: Crunching Location .......... Location Not Found
  • Status: offline
  • Ribbons : 12
Re:3DMark11 installed, run vantage yet? 2010/12/09 21:59:18 (permalink)
z3r0t0l0rence

farthestkris

managed to squeeze out P6806   http://3dmark.com/3dm11/42062?show_ads=true&page=/3dm11/42062%3Fkey%3DwwWnLHE5S2H9fpcTUhjz5HnwXmkBwT


Odd that your memory is running @667 according to your 3DMark results.  Isn't that DDR3 that you have?  Just doesn't look right IMO!

your forgetting the multi ram has on it :) 

 
 
 
#47
steel700
New Member
  • Total Posts : 43
  • Reward points : 0
  • Joined: 2005/11/16 06:15:33
  • Status: offline
  • Ribbons : 0
Re:3DMark11 installed, run vantage yet? 2010/12/10 07:41:24 (permalink)
Had same issue after installing 3DMark11. The future mark forums listed a contact for a patch for 3DMark11 that they were trying. I received a link for the patch, it seemed as though the patch was for the system info and it was supposed to stop the black screen when you reached the physics test. Patch did not work. I had to uninstall 3DMark11 and Vantage. I looking in my installed programs and it was showing two entries for Futuremark System Info. I uninstalled both of these. I then reinstalled Vantage and it is working just fine. Sent them an email informing them that the patch did not work and that it was corrupting the Vantage system info and causing Vantage not to work. 
 
Link to Vantage Score:
http://3dmark.com/3dmv/2786580 

post edited by steel700 - 2010/12/10 07:44:17

Windows 7 64bit / EVGA X58 Classified 3 / Intel 980X 3.33Ghz / 12 GB (3x4) GSkill Ripjaws DDR3 1600 (9-9-9-24 2T 1.5V) / 2x EVGA GTX580 SC / 1 Crucial CM300 256MB SSD / 2x Seagate 320GB, Raid 0 / Corsair 800D Obsidian Case
Corsair 1200W  Gold PSU \ LG BluRay GB H20L  / Custom H2O / Logitech G15 Keyboard /
R.A.T. 7 Mouse  / Logitech G930 Headset / Alienware AW2310 120Hz 3D Moniter / Nvidia 3D Vision Kit


 

#48
Johnny_Utah
CLASSIFIED Member
  • Total Posts : 4330
  • Reward points : 0
  • Joined: 2008/02/13 16:26:04
  • Status: offline
  • Ribbons : 5
Re:3DMark11 installed, run vantage yet? 2010/12/10 10:50:44 (permalink)
AHowes

Johnny, i've been using Vantage lately while just havin the res set at 1920x1080 after i've already set it up for 3 screens while benching.

Back when i would run it while having the res set for tripple screen but it annoyed me as it would turn the other 2 screens on and off inbetween the bench sceens. THat plus i figured the system would bench higher not runing all that memory for tripple screens at the time for benches.. I just changed the screen res to 1920x1080.. When i'm done benching i can just change the res back to the max and all 3 screens would be back up.

I've done the same for 3Dmark11 as well.. no probs runing the bench when i only have 1 screen up as i have the desktop res set to 1920x1080.


 
I wonder if indeed the system WILL bench higher if I simply run in 1920x1080...as you said, it would most likely would.  I will disable the other two screens while benching.

5930k (H20)  //  ASUS Rampage V Extreme
EVGA Titan SC x 4 (H20)
Gskill Ripjaws 2400
 EVGA 1600G2 //  DD Torture Rack
 
 
#49
crossg
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2009/01/26 17:27:08
  • Location: Calgary
  • Status: offline
  • Ribbons : 1
Re:3DMark11 installed, run vantage yet? 2010/12/11 13:58:03 (permalink)
Sure wish I would have seen this tread yesterday. Installed a second 580 SC yesterday and decided to bench with Vantage after I had tried 11.  I thought I had issues with SLI or a bad card?? Sorted now after a few hours of fun and seeing this thread. 

PC1
Intel Core i7 980X - Asus Rampage III Formula - 12GB Mushkin DDR3-1600 MHz 7-9-7-24 - EVGA GTX 580 SC x 2. - Samsung P2570 - 1920x1080 LCD - WD 1TB Sata III - Seagate 1.5 TB HDD - Antec 900 II Gamer Case - Corsair Gold AX 1200W PSU. Windows 7 x 64.
PC 2
Intel Core i7 2600K - Asus P8P67 Deluxe- 4GB GSkill Ripjaws DDR3-1600 MHz 6-8-6-24 - EVGA GTX 580 SC - Samsung P2370 - WD 1TB Sata III - Antec 900 II Gamer Case - Corsair Gold AX 1200W PSU. Windows 7 x 64.
 
#50
kayawish24
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2010/01/21 15:12:46
  • Status: offline
  • Ribbons : 0
Re:3DMark11 installed, run vantage yet? 2010/12/14 16:42:25 (permalink)
Johnny_Utah

From the responses on the FM forums, it appears that only people with SLI are having problems with the sysinfo being overwritten and vantage then being corrupted.  Pinto (FM Forums) has a possible fix:

PINTO:
"The problem appears on sli rig only but there is a solution!
It solve the combined test problem on sli setup too:

-download nvidia inspector
-click on the button near the driver name
-it open a new screen
-in the first group of keys modify the Sli compatibility bits(DX10) from 0X00000000 to 0X008000F5
-apply change
-run your bench as usual

for me it works great increase the combined test from 10fps to 40 and run Vantage great artefact free"

http://futuremark.yougame...hp?t=139008&page=2

Hope this helps guys.




 
its NOT 0x08000F5 its 0x080000F5 ( four zeros after 8 ) otherwise NVinspector will crash :p

#51
kayawish24
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2010/01/21 15:12:46
  • Status: offline
  • Ribbons : 0
Re:3DMark11 installed, run vantage yet? 2010/12/14 16:44:18 (permalink)
3DMark 11 SLi (Possible Fix)
 
First thing's first... Download Nvidia Inspector:
 
[URL="http://download.orbmu2k.d..les/nvidiaInspector.zip"]http://download.orbmu2k.de/files/nvidiaInspector.zip[/URL]
 
Next, Open it Up and click the Tools Icon as demonstrated and highlighted below:
 

 
 
Next a big window with multiple listings of settings will appear. Within the first 5 entry's you will see two labeled SLi Compatibility bits (DX10) and SLi Compatibility bits.
 
This image has been resized. Click this bar to view the full image. The original image dimensions are 880x794 and 185KB in size.
 
Select the values next to SLi Compatibility bits (DX10) and change it to 0x080000F5 then click Apply Settings. (Make sure 3DMark11 is closed during this time or the setting's won't apply to it until you restart it.)
 
At this point you should get SLi scaling and performance in 3DMark 11.
 
this will also fix your vantage texture problem after installing 3dmark 11 :p
#52
iceman0124
ACX Member
  • Total Posts : 331
  • Reward points : 0
  • Joined: 2007/04/02 14:06:56
  • Status: offline
  • Ribbons : 1
Re:3DMark11 installed, run vantage yet? 2010/12/15 13:49:22 (permalink)
The above fix works
 
Heres my score without the fix
 
http://3dmark.com/3dm11/189281
 
and with
http://3dmark.com/3dm11/191044
 
 Nice jump and both cards are indeed working, HOWEVER....theres an odd rapid flickering from all onscreen light sources in most tests....so you do get SLI...but things aint quite right, at least for me anyways.
 
EDIT, the fix did NOT correct the corruption in Vantage for me...its still a garbled mess.
 
Any new "fixes"?
 
Got vantage working
http://3dmark.com/3dmv/2797242
38K P in SLI with the 260 for physX
With the CPU doing physics I get 31K
http://3dmark.com/3dmv/2797287

Still would like to get 3DM11 to display/run properly in SLI...
post edited by iceman0124 - 2010/12/15 15:02:06

Corsair Obsidian D ~Silverstone ST-1000-P~ i7 950 @ 4.08GHZ/1.232V~GA X58A-UD3R~ 2X EVGA GTX 660 Ti's in SLI~12GB Crucial Ballistix DDR3 1600 ~120GB OCZ Agility 2 SSD/ 1TB WD 7200 RPM 64MB cache ~Samsung Blue Ray / DVDRW~ GTX 460  for physX ~ XFI-TI PCIE~ Asus 1080P 120HZ LCD/NVIDIA 3D vision kit ~ Win 7 Pro-64
 
#53
kayawish24
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2010/01/21 15:12:46
  • Status: offline
  • Ribbons : 0
Re:3DMark11 installed, run vantage yet? 2010/12/15 14:58:02 (permalink)
put again 0x00000000 insted of 0x080000F5 and ur vantage will be ok :)

#54
AHowes
FTW Member
  • Total Posts : 1546
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 1
Re:3DMark11 installed, run vantage yet? 2010/12/15 16:03:50 (permalink)
kayawish24

put again 0x00000000 insted of 0x080000F5 and ur vantage will be ok :)


 
When i change it back to defualt vantage looks trashed with large white flashing objects on the screen. :( 


  
Intel i7 6700K Custom Water Cooled
Asus Z170 Maximus VII Hero  
G.Skill 16GB 3600MHz DDR4 15,15,15 
Samsung 950 Pro 512GB/Samsung 500GB Evo
EVGA 1080 Classified SLI Water Cooled   
27" Asus ROG SWIFT 1440 165Hz 
EVGA SuperNova G2 1000WATT P/S 
Thermaltake Core X9 Case w/ EK Cooling
#55
iceman0124
ACX Member
  • Total Posts : 331
  • Reward points : 0
  • Joined: 2007/04/02 14:06:56
  • Status: offline
  • Ribbons : 1
Re:3DMark11 installed, run vantage yet? 2010/12/17 16:32:37 (permalink)
Icant get changes to stick at all anymore after a driver reinstall.

Corsair Obsidian D ~Silverstone ST-1000-P~ i7 950 @ 4.08GHZ/1.232V~GA X58A-UD3R~ 2X EVGA GTX 660 Ti's in SLI~12GB Crucial Ballistix DDR3 1600 ~120GB OCZ Agility 2 SSD/ 1TB WD 7200 RPM 64MB cache ~Samsung Blue Ray / DVDRW~ GTX 460  for physX ~ XFI-TI PCIE~ Asus 1080P 120HZ LCD/NVIDIA 3D vision kit ~ Win 7 Pro-64
 
#56
maniacvvv
Omnipotent Enthusiast
  • Total Posts : 9816
  • Reward points : 0
  • Joined: 2009/09/10 20:29:17
  • Location: Seattle WA
  • Status: offline
  • Ribbons : 159
Re:3DMark11 installed, run vantage yet? 2010/12/17 19:59:16 (permalink)
Its much simpler to Uninstall Mark11. Then uninstall SysInfo and Vantage.
 
Then: Re-install Vantage and all is well.
 
There is no need to run Mark11 for SLI testing at this time, maybe after proper drivers are released....




#57
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile