355.60 Last Stable Driver?

Page: 12 > Showing page 1 of 2
Author
Post
Essentials Only Full Version
scott@bjorn3d
Superclocked Member
  • Total Posts : 145
  • Reward points : 0
  • Joined: 2006/11/20 04:37:19
  • Status: offline
  • Ribbons : 0
2015/11/09 04:54:21 (permalink)
Has anyone had issues with the newer drivers?  My cards will go nuts after a while Folding a Core 21 with any drivers newer than that.  I always tell the driver upgrades to do a clean install also.  Just wondering if anyone else is having the issue.




#1

52 Replies Related Threads
    yodap
    CLASSIFIED Member
    • Total Posts : 2659
    • Reward points : 0
    • Joined: 2011/05/15 06:13:40
    • Location: NY, Upstate
    • Status: offline
    • Ribbons : 8
    Re: 355.60 Last Stable Driver? 2015/11/09 05:26:28 (permalink)
    Read through our TZC thread and there are many problems. For me, I've been running 350.05 on a GTX 970 without a hiccup for a long time. Sorry I can't be of more help.
    Good to hear from you scott.



                                        
            

     
    #2
    Gunsvnvmc
    ACX Member
    • Total Posts : 478
    • Reward points : 0
    • Joined: 2008/10/28 14:16:00
    • Location: Ardmore OK
    • Status: offline
    • Ribbons : 0
    Re: 355.60 Last Stable Driver? 2015/11/09 05:31:38 (permalink)
    Check my post on the 2015 Time Zone Challenge about this problem.



     
     
    "I will not tip toe through life, only to arrive safely at death."
     
    #3
    Opolis
    FTW Member
    • Total Posts : 1688
    • Reward points : 0
    • Joined: 2010/03/25 18:49:16
    • Status: offline
    • Ribbons : 7
    Re: 355.60 Last Stable Driver? 2015/11/09 06:41:08 (permalink)
    My Windows rig is on 358.87 with no issues.  One 980ti.

               
            
    #4
    Zuhl3156
    Omnipotent Enthusiast
    • Total Posts : 12160
    • Reward points : 0
    • Joined: 2010/03/23 12:52:50
    • Location: Kidnapped by Gypsies
    • Status: offline
    • Ribbons : 30
    Re: 355.60 Last Stable Driver? 2015/11/09 06:44:22 (permalink)
    355.82 here with only a seldom failed Core x21 WU. I'm too old and too lazy to change these drivers right now. These are the last version I have been able to get any kind of stable gaming performance from.


     
     Heatware
    #5
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 07:08:36 (permalink)
    Removed
    post edited by bcavnaugh - 2015/11/09 08:28:47

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #6
    Pgcmoore
    CLASSIFIED Member
    • Total Posts : 2099
    • Reward points : 0
    • Joined: 2011/03/27 09:29:41
    • Location: Florida
    • Status: offline
    • Ribbons : 14
    Re: 355.60 Last Stable Driver? 2015/11/09 07:37:10 (permalink)
    Zuhl3156
    355.82 here with only a seldom failed Core x21 WU. I'm too old and too lazy to change these drivers right now. These are the last version I have been able to get any kind of stable gaming performance from.


    I'm back on 355.82 here also, I was gonna wait to revert, considering the possibility of another release any minute, not that I expect anything to change, but really surprised we didn't already see a Fallout 4 game ready driver yet.


     
    edit: really hoping 358+ drivers are not required!
    post edited by Pgcmoore - 2015/11/09 07:40:12

       "This program has performed an illegal operation and will be shut down"    
                                  
                            My Affiliate Code is  05G-UGD-GZVU
     
    #7
    scott@bjorn3d
    Superclocked Member
    • Total Posts : 145
    • Reward points : 0
    • Joined: 2006/11/20 04:37:19
    • Status: offline
    • Ribbons : 0
    Re: 355.60 Last Stable Driver? 2015/11/09 09:27:46 (permalink)
    yodap
    Read through our TZC thread and there are many problems. For me, I've been running 350.05 on a GTX 970 without a hiccup for a long time. Sorry I can't be of more help.
    Good to hear from you scott.


    Ok will check in on it tonight, how have you been?  Cancer still in remission for me.  Also my daughter that had Hodgkins at 13 and why I got my team going is now 20, married and just had a grandson for me 3 weeks ago.  So things are going pretty good.  My little team has worked their way up to 32 on Folding.  Not bad for 6-7 guys.




    #8
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 12:04:12 (permalink)
    Pgcmoore
    Zuhl3156
    355.82 here with only a seldom failed Core x21 WU. I'm too old and too lazy to change these drivers right now. These are the last version I have been able to get any kind of stable gaming performance from.


    I'm back on 355.82 here also, I was gonna wait to revert, considering the possibility of another release any minute, not that I expect anything to change, but really surprised we didn't already see a Fallout 4 game ready driver yet.


     
    edit: really hoping 358+ drivers are not required!


    358.91 is now out!
    Game Ready
    Learn more about  how to get the optimal experience for Fallout  4, Star  Wars: Battlefront, and StarCraft  II: Legacy of the Void.
    post edited by bcavnaugh - 2015/11/09 12:05:40

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #9
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 12:59:06 (permalink)
    Gunsvnvmc
    Check my post on the 2015 Time Zone Challenge about this problem.


    I did this and lost over 150,000 Credits on P9208
    But what is done is done, I only had two hours left out of 9 Hours that it needs to run.
    Glad I left the other one complete.
     
    *********************** Log Started 2015-11-09T20:53:12Z ***********************
    20:54:09:WU00:FS01:0x21:ERROR:Potential energy error of 805.531, threshold of 10
    20:54:09:WU00:FS01:0x21:ERROR:Reference Potential Energy: -1.23368e+006 | Given Potential Energy: -1.23287e+006
    20:54:10:WARNING:WU00:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    post edited by bcavnaugh - 2015/11/09 13:01:35

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #10
    yodap
    CLASSIFIED Member
    • Total Posts : 2659
    • Reward points : 0
    • Joined: 2011/05/15 06:13:40
    • Location: NY, Upstate
    • Status: offline
    • Ribbons : 8
    Re: 355.60 Last Stable Driver? 2015/11/09 13:14:51 (permalink)
    scott@bjorn3d
    yodap
    Read through our TZC thread and there are many problems. For me, I've been running 350.05 on a GTX 970 without a hiccup for a long time. Sorry I can't be of more help.
    Good to hear from you scott.


    Ok will check in on it tonight, how have you been?  Cancer still in remission for me.  Also my daughter that had Hodgkins at 13 and why I got my team going is now 20, married and just had a grandson for me 3 weeks ago.  So things are going pretty good.  My little team has worked their way up to 32 on Folding.  Not bad for 6-7 guys.


    Congrats Gramps!
    Good to hear about all that good news.
    post edited by yodap - 2015/11/09 13:16:12



                                        
            

     
    #11
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 14:33:37 (permalink)
    Running Driver 353.62 now on my X99 GTX 980 Rig and PULLED TWO P9704 Projects.
    Let See What Happens Now! My HFM Web Site

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #12
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 16:07:47 (permalink)
    I am now seeing problems on Core 21 P9209 on my GTX 980 Hybrid Rig
    21:34:57:WU01:FS00:0x21:Completed 175000 out of 2500000 steps (7%)
    21:40:40:WU01:FS00:0x21:Completed 200000 out of 2500000 steps (8%)
    21:40:54:WU01:FS00:0x21:Bad State detected... attempting to resume from last good checkpoint
    21:46:36:WU01:FS00:0x21:Completed 125000 out of 2500000 steps (5%)
    21:52:18:WU01:FS00:0x21:Completed 150000 out of 2500000 steps (6%)
    .
    .
    .
    23:53:28:WU01:FS00:0x21:Completed 675000 out of 2500000 steps (27%)
     
    post edited by bcavnaugh - 2015/11/09 16:27:21

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #13
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 16:27:16 (permalink)
    353.62 Driver Errors as Well. Going back to 347.88
     
    23:11:11:WU02:FS03:0x21:ERROR:exception: Error downloading array velm: clEnqueueReadBuffer (-5)
    23:11:11:WU02:FS03:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    23:11:12:WARNING:WU02:FS03:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    23:11:12:WU02:FS03:Sending unit results: id:02 state:SEND error:FAULTY project:9704 run:64 clone:18 gen:72 core:0x21 unit:0x00000063ab404162553ec5d398a809a5
     
    While some complete most do not!
    post edited by bcavnaugh - 2015/11/09 16:39:21

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #14
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 17:08:16 (permalink)
    Removed Driver 353.62 and installed Driver 347.88 and I did not Drop any Running Projects as I did when I install Driver 353.62.
    Granted that for the 2015 TZC I may drop off the charts for a day or two.
     

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #15
    Gunsvnvmc
    ACX Member
    • Total Posts : 478
    • Reward points : 0
    • Joined: 2008/10/28 14:16:00
    • Location: Ardmore OK
    • Status: offline
    • Ribbons : 0
    Re: 355.60 Last Stable Driver? 2015/11/09 17:14:06 (permalink)
    I didn't have a problem one with the 353.62 driver have not had one error or lost work unit since installing it.
    My ppd is going back up as well.



     
     
    "I will not tip toe through life, only to arrive safely at death."
     
    #16
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 17:30:40 (permalink)
    Gunsvnvmc
    I didn't have a problem one with the 353.62 driver have not had one error or lost work unit since installing it.
    My ppd is going back up as well.


    Even on P9704 ? Are you using HFM ?
    post edited by bcavnaugh - 2015/11/09 17:35:43

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #17
    cokeman54
    SSC Member
    • Total Posts : 934
    • Reward points : 0
    • Joined: 2002/04/02 14:18:49
    • Location: Abilene, Texas
    • Status: offline
    • Ribbons : 3
    Re: 355.60 Last Stable Driver? 2015/11/09 17:30:45 (permalink)
    Depends on work unit, GPU and OS. With Maxwell and core 21 GrandPa had a nice post about reducing the memory clock. My driver is 358.91 win 10 and GTX 980 SC. With core 21 must down clock memory or have issues. Tkanks Grandpa


     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    #18
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 17:33:16 (permalink)
    cokeman54
    Depends on work unit, GPU and OS. With Maxwell and core 21 GrandPa had a nice post about reducing the memory clock. My driver is 358.91 win 10 and GTX 980 SC. With core 21 must down clock memory or have issues. Tkanks Grandpa


    Down Clocking the Memory did not work for me.
    I did give this a go 1st.
    The only Core 21 Project that I have errors on are P9704 (UNKNOWN_ENUM) No Other. HFM
     
    Under Driver 353.62 I was seeing problems on Core 21 P9209 on my GTX 980 Hybrid Rig It is NOT a problem under Driver 347.88.
    I do see this on P9209 but it will complete and not Error out like P9704 is doing. 
    21:40:40:WU01:FS00:0x21:Completed 200000 out of 2500000 steps (8%)
    21:40:54:WU01:FS00:0x21:Bad State detected... attempting to resume from last good checkpoint
    21:46:36:WU01:FS00:0x21:Completed 125000 out of 2500000 steps (5%)
     
    OS on All Rigs is Windows 7 x64
    post edited by bcavnaugh - 2015/11/09 18:01:55

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #19
    Gunsvnvmc
    ACX Member
    • Total Posts : 478
    • Reward points : 0
    • Joined: 2008/10/28 14:16:00
    • Location: Ardmore OK
    • Status: offline
    • Ribbons : 0
    Re: 355.60 Last Stable Driver? 2015/11/09 18:28:37 (permalink)
    I will keep a watch out for a p9704 work unit to show up on one of my computers and when it does will keep a close eye on it and let you know the results.
    bcavnaugh
    Gunsvnvmc
    I didn't have a problem one with the 353.62 driver have not had one error or lost work unit since installing it.
    My ppd is going back up as well.


    Even on P9704 ? Are you using HFM ?


    don't even know what HFM is.



     
     
    "I will not tip toe through life, only to arrive safely at death."
     
    #20
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/09 18:33:42 (permalink)
    Gunsvnvmc
    I will keep a watch out for a p9704 work unit to show up on one of my computers and when it does will keep a close eye on it and let you know the results.
    bcavnaugh
    Gunsvnvmc
    I didn't have a problem one with the 353.62 driver have not had one error or lost work unit since installing it.
    My ppd is going back up as well.


    Even on P9704 ? Are you using HFM ?


    don't even know what HFM is.


    If you look at my link above it will show you the Projects running and status plus PPD and Credit for your computers Folding.
    This is shown at the bottom of my page above in the link HFM, this is my web site.
    Page rendered by HFM.NET 0.9.3.718 on November 09,  2015 at 7:24:15 PM -07:00
    post edited by bcavnaugh - 2015/11/09 18:52:17

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #21
    Gunsvnvmc
    ACX Member
    • Total Posts : 478
    • Reward points : 0
    • Joined: 2008/10/28 14:16:00
    • Location: Ardmore OK
    • Status: offline
    • Ribbons : 0
    Re: 355.60 Last Stable Driver? 2015/11/09 19:25:54 (permalink)
    bcavnaugh
    Gunsvnvmc
    I will keep a watch out for a p9704 work unit to show up on one of my computers and when it does will keep a close eye on it and let you know the results.
    bcavnaugh
    Gunsvnvmc
    I didn't have a problem one with the 353.62 driver have not had one error or lost work unit since installing it.
    My ppd is going back up as well.


    Even on P9704 ? Are you using HFM ?


    don't even know what HFM is.


    If you look at my link above it will show you the Projects running and status plus PPD and Credit for your computers Folding.
    This is shown at the bottom of my page above in the link HFM, this is my web site.
    Page rendered by HFM.NET 0.9.3.718 on November 09,  2015 at 7:24:15 PM -07:00


    You sure have a lot of information on that link and a lot of GPU cards folding.
    No wonder you passed me with twice as many cards folding I no longer feel so bad.
    post edited by Gunsvnvmc - 2015/11/09 19:30:02



     
     
    "I will not tip toe through life, only to arrive safely at death."
     
    #22
    Gunsvnvmc
    ACX Member
    • Total Posts : 478
    • Reward points : 0
    • Joined: 2008/10/28 14:16:00
    • Location: Ardmore OK
    • Status: offline
    • Ribbons : 0
    Re: 355.60 Last Stable Driver? 2015/11/10 04:44:48 (permalink)
    I have a P9704 folding bcavnaugh it is at 37% with no problems so far I will keep a close eye on it and update on results.
    OK finished the P 9704 with no problem at all on driver 353.62.
    post edited by Gunsvnvmc - 2015/11/10 06:25:23



     
     
    "I will not tip toe through life, only to arrive safely at death."
     
    #23
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/10 07:21:10 (permalink)
    Gunsvnvmc
    I have a P9704 folding bcavnaugh it is at 37% with no problems so far I will keep a close eye on it and update on results.
    OK finished the P 9704 with no problem at all on driver 353.62.
     
    I blame all of this on poor written Project Code and that is the end of this.


    Did you set the GPU Clock or the Memory?
    So you have NO Errors or issues on any Rig at All?
    Are all your GPU's GTX 980 or 970?
    post edited by bcavnaugh - 2015/11/10 07:27:34

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #24
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/10 07:24:10 (permalink)
     
    Driver 347.88 Stills I see Errors on Core 21  project:9630 project:9629 project:9634
     
    NO Errors on any P9704 Core 21 Projects. For P9704 Driver 347.88 works fine.
     
    I blame all of this on poor written Project Code and that is the end of this. 
     
    980HC
    *********************** Log Started 2015-11-10T01:01:06Z ***********************
    ******************************* Date: 2015-11-10 *******************************
    10:20:52:WARNING:WU02:FS03:Server did not like results, dumping
    ******************************* Date: 2015-11-10 *******************************
    10:20:52:WU02:FS03:Upload 99.93%
    10:20:52:WU02:FS03:Upload complete
    10:20:52:WU02:FS03:Server responded WORK_QUIT (404)
    10:20:52:WARNING:WU02:FS03:Server did not like results, dumping
    10:20:52:WU02:FS03:Cleaning up
     
     
    980HB
    *********************** Log Started 2015-11-10T01:01:47Z ***********************
    ******************************* Date: 2015-11-10 *******************************
    11:54:03:WARNING:WU00:FS01:Server did not like results, dumping
    12:21:14:WU02:FS01:0x21:ERROR:Max Retries Reached
    12:21:14:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    12:22:07:WU00:FS00:0x21:ERROR:Max Retries Reached
    12:22:08:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    ******************************* Date: 2015-11-10 *******************************
    15:03:28:WU00:FS00:0x21:ERROR:Max Retries Reached
    15:03:29:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
      
    11:53:58:WU00:FS01:Upload 95.92%
    11:54:03:WU00:FS01:Upload complete
    11:54:03:WU00:FS01:Server responded WORK_QUIT (404)
    11:54:03:WARNING:WU00:FS01:Server did not like results, dumping
    11:54:03:WU00:FS01:Cleaning up
     
    12:14:03:WU02:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint
    12:15:27:WU02:FS01:0x21:Completed 120000 out of 2000000 steps (6%)
    12:16:52:WU02:FS01:0x21:Completed 140000 out of 2000000 steps (7%)
    12:18:16:WU02:FS01:0x21:Completed 160000 out of 2000000 steps (8%)
    12:19:41:WU02:FS01:0x21:Completed 180000 out of 2000000 steps (9%)
    12:21:06:WU02:FS01:0x21:Completed 200000 out of 2000000 steps (10%)
    12:21:14:WU02:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint
    12:21:14:WU02:FS01:0x21:Max number of retries reached. Aborting.
    12:21:14:WU02:FS01:0x21:ERROR:Max Retries Reached
    12:21:14:WU02:FS01:0x21:Saving result file logfile_01.txt
    12:21:14:WU02:FS01:0x21:Saving result file log.txt
    12:21:14:WU02:FS01:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    12:21:14:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    12:21:14:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9630 run:1 clone:23 gen:46 core:0x21 unit:0x00000041ab436c9b5609bee22119aafb
    12:21:14:WU02:FS01:Uploading 9.50KiB to 171.67.108.155
    12:21:14:WU02:FS01:Connecting to 171.67.108.155:8080
    12:21:14:WU02:FS01:Upload complete
    12:21:14:WU02:FS01:Server responded WORK_ACK (400)
    12:21:14:WU02:FS01:Cleaning up
      
    12:22:00:WU00:FS00:0x21:Completed 100000 out of 2000000 steps (5%)
    12:22:07:WU00:FS00:0x21:Bad State detected... attempting to resume from last good checkpoint
    12:22:07:WU00:FS00:0x21:Max number of retries reached. Aborting.
    12:22:07:WU00:FS00:0x21:ERROR:Max Retries Reached
    12:22:07:WU00:FS00:0x21:Saving result file logfile_01.txt
    12:22:07:WU00:FS00:0x21:Saving result file log.txt
    12:22:07:WU00:FS00:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    12:22:08:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    12:22:08:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:9629 run:0 clone:23 gen:37 core:0x21 unit:0x0000002fab436c9b5609bee23824a870
    12:22:08:WU00:FS00:Uploading 8.50KiB to 171.67.108.155
    12:22:08:WU00:FS00:Connecting to 171.67.108.155:8080
    12:22:08:WU00:FS00:Upload complete
    12:22:08:WU00:FS00:Server responded WORK_ACK (400)
    12:22:08:WU00:FS00:Cleaning up
     
    15:03:21:WU00:FS00:0x21:Completed 300000 out of 2000000 steps (15%)
    15:03:28:WU00:FS00:0x21:Bad State detected... attempting to resume from last good checkpoint
    15:03:28:WU00:FS00:0x21:Max number of retries reached. Aborting.
    15:03:28:WU00:FS00:0x21:ERROR:Max Retries Reached
    15:03:28:WU00:FS00:0x21:Saving result file logfile_01.txt
    15:03:28:WU00:FS00:0x21:Saving result file log.txt
    15:03:28:WU00:FS00:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    15:03:29:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    15:03:29:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:9634 run:1 clone:40 gen:14 core:0x21 unit:0x00000015ab436c9b5609bee3eb2b8f6f
    15:03:29:WU00:FS00:Uploading 10.00KiB to 171.67.108.155
    15:03:29:WU00:FS00:Connecting to 171.67.108.155:8080
    15:03:29:WU00:FS00:Upload complete
    15:03:29:WU00:FS00:Server responded WORK_ACK (400)
    15:03:29:WU00:FS00:Cleaning up
     
    post edited by bcavnaugh - 2015/11/10 07:35:43

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #25
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/10 07:31:13 (permalink)
    Gunsvnvmc
    bcavnaugh
    Gunsvnvmc
    I will keep a watch out for a p9704 work unit to show up on one of my computers and when it does will keep a close eye on it and let you know the results.
    bcavnaugh
    Gunsvnvmc
    I didn't have a problem one with the 353.62 driver have not had one error or lost work unit since installing it.
    My ppd is going back up as well.


    Even on P9704 ? Are you using HFM ?


    don't even know what HFM is.


    If you look at my link above it will show you the Projects running and status plus PPD and Credit for your computers Folding.
    This is shown at the bottom of my page above in the link HFM, this is my web site.
    Page rendered by HFM.NET 0.9.3.718 on November 09,  2015 at 7:24:15 PM -07:00


    You sure have a lot of information on that link and a lot of GPU cards folding.
    No wonder you passed me with twice as many cards folding I no longer feel so bad.


    Thanks, the AMD and GTX 780 Rigs were not going to be in the 2015 Time Zone Challenge But then I have to do what I can to your Top Folder and you.

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #26
    Gunsvnvmc
    ACX Member
    • Total Posts : 478
    • Reward points : 0
    • Joined: 2008/10/28 14:16:00
    • Location: Ardmore OK
    • Status: offline
    • Ribbons : 0
    Re: 355.60 Last Stable Driver? 2015/11/10 11:46:09 (permalink)
    bcavnaugh
    Gunsvnvmc
    I have a P9704 folding bcavnaugh it is at 37% with no problems so far I will keep a close eye on it and update on results.
    OK finished the P 9704 with no problem at all on driver 353.62.
     
    I blame all of this on poor written Project Code and that is the end of this.


    Did you set the GPU Clock or the Memory?
    So you have NO Errors or issues on any Rig at All?
    Are all your GPU's GTX 980 or 970?


    All of my GPUs are OC to 1500 MHZ two are EVGA Titan X Hydro Coppers and four of them are EVGA 980 Hydro Coppers, did not change the memory settings at all.
    They just folded like crazy now to day my points are lower and I don't understand why no failed work units.



     
     
    "I will not tip toe through life, only to arrive safely at death."
     
    #27
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/10 15:12:40 (permalink)
    Gunsvnvmc
    bcavnaugh
    Gunsvnvmc
    I have a P9704 folding bcavnaugh it is at 37% with no problems so far I will keep a close eye on it and update on results.
    OK finished the P 9704 with no problem at all on driver 353.62.
     
    I blame all of this on poor written Project Code and that is the end of this.


    Did you set the GPU Clock or the Memory?
    So you have NO Errors or issues on any Rig at All?
    Are all your GPU's GTX 980 or 970?


    All of my GPUs are OC to 1500 MHZ two are EVGA Titan X Hydro Coppers and four of them are EVGA 980 Hydro Coppers, did not change the memory settings at all.
    They just folded like crazy now to day my points are lower and I don't understand why no failed work units.


    You are just a Lucky Guy.

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #28
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15144
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: 355.60 Last Stable Driver? 2015/11/11 09:11:50 (permalink)
    Overnight
    Seems that we have a New Core 15 (A Core that No One Likes)
     
    980 HC
    23:57:51:WU04:FS02:0x21:Bad State detected... attempting to resume from last good checkpoint
    23:57:51:WU04:FS02:0x21:Max number of retries reached. Aborting.
    23:57:51:WU04:FS02:0x21:ERROR:Max Retries Reached
    23:57:51:WU04:FS02:0x21:Saving result file logfile_01.txt
    23:57:51:WU04:FS02:0x21:Saving result file log.txt
    23:57:51:WU04:FS02:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    23:57:52:WARNING:WU04:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    23:57:52:WU04:FS02:Sending unit results: id:04 state:SEND error:FAULTY project:9638 run:0 clone:38 gen:38 core:0x21 unit:0x00000033ab436c9b5609bee3675991d2
     
     
    02:44:39:WU03:FS02:0x21:Bad State detected... attempting to resume from last good checkpoint
    02:44:39:WU03:FS02:0x21:Max number of retries reached. Aborting.
    02:44:39:WU03:FS02:0x21:ERROR:Max Retries Reached
    02:44:39:WU03:FS02:0x21:Saving result file logfile_01.txt
    02:44:39:WU03:FS02:0x21:Saving result file log.txt
    02:44:39:WU03:FS02:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    02:44:40:WARNING:WU03:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    02:44:40:WU03:FS02:Sending unit results: id:03 state:SEND error:FAULTY project:9635 run:0 clone:26 gen:29 core:0x21 unit:0x00000026ab436c9b5609bee3e551b1be
     
    14:16:26:WU05:FS04:0x21:Bad State detected... attempting to resume from last good checkpoint
    14:16:26:WU05:FS04:0x21:Max number of retries reached. Aborting.
    14:16:26:WU05:FS04:0x21:ERROR:Max Retries Reached
    14:16:26:WU05:FS04:0x21:Saving result file logfile_01.txt
    14:16:26:WU05:FS04:0x21:Saving result file log.txt
    14:16:26:WU05:FS04:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    14:16:27:WARNING:WU05:FS04:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    14:16:27:WU05:FS04:Sending unit results: id:05 state:SEND error:FAULTY project:9641 run:1 clone:8 gen:49 core:0x21 unit:0x00000042ab436c9b5609bee45794febe
     
    16:58:15:WU00:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint
    16:58:15:WU00:FS01:0x21:Max number of retries reached. Aborting.
    16:58:15:WU00:FS01:0x21:ERROR:Max Retries Reached
    16:58:15:WU00:FS01:0x21:Saving result file logfile_01.txt
    16:58:15:WU00:FS01:0x21:Saving result file log.txt
    16:58:15:WU00:FS01:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    16:58:16:WARNING:WU00:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    16:58:16:WU00:FS01:Sending unit results: id:00 state:SEND error:FAULTY project:9630 run:1 clone:35 gen:39 core:0x21 unit:0x00000036ab436c9b5609bee2c01e720a
     
     
    980HB
    06:48:24:WU01:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint
    06:48:24:WU01:FS01:0x21:Max number of retries reached. Aborting.
    06:48:24:WU01:FS01:0x21:ERROR:Max Retries Reached
    06:48:24:WU01:FS01:0x21:Saving result file logfile_01.txt
    06:48:24:WU01:FS01:0x21:Saving result file log.txt
    06:48:24:WU01:FS01:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    06:48:25:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    06:48:25:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9627 run:1 clone:22 gen:51 core:0x21 unit:0x00000044ab436c9b5609bee1e84f0223
     
    09:37:07:WU01:FS00:0x21:Bad State detected... attempting to resume from last good checkpoint
    09:37:07:WU01:FS00:0x21:Max number of retries reached. Aborting.
    09:37:07:WU01:FS00:0x21:ERROR:Max Retries Reached
    09:37:07:WU01:FS00:0x21:Saving result file logfile_01.txt
    09:37:07:WU01:FS00:0x21:Saving result file log.txt
    09:37:07:WU01:FS00:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    09:37:08:WARNING:WU01:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    09:37:08:WU01:FS00:Sending unit results: id:01 state:SEND error:FAULTY project:9626 run:0 clone:7 gen:65 core:0x21 unit:0x00000057ab436c9b5609bededad7fd3e
     
    09:56:35:WU00:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint
    09:56:35:WU00:FS01:0x21:Max number of retries reached. Aborting.
    09:56:35:WU00:FS01:0x21:ERROR:Max Retries Reached
    09:56:35:WU00:FS01:0x21:Saving result file logfile_01.txt
    09:56:35:WU00:FS01:0x21:Saving result file log.txt
    09:56:35:WU00:FS01:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
    09:56:36:WARNING:WU00:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
    09:56:36:WU00:FS01:Sending unit results: id:00 state:SEND error:FAULTY project:9634 run:1 clone:17 gen:36 core:0x21 unit:0x00000033ab436c9b5609bee304ef6a34
     
     
    post edited by bcavnaugh - 2015/11/11 09:14:31

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #29
    Grandpa_01
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2012/04/28 20:59:00
    • Status: offline
    • Ribbons : 0
    Re: 355.60 Last Stable Driver? 2015/11/11 23:54:23 (permalink)
    bcavnaugh
     

    Driver 347.88 Stills I see Errors on Core 21  project:9630 project:9629 project:9634
     
    NO Errors on any P9704 Core 21 Projects. For P9704 Driver 347.88 works fine.
     
    I blame all of this on poor written Project Code and that is the end of this. 


    You can blame it on poorly written code if you wish but then you have to explain why Fermi and Kepler have no problem with them. Also you will need to explain why many people get the Bad States to completely quit by lowering the memory speed. Then you will also need to explain why Nvidia chose to force Maxwell cards to run in P2 state  which lowers the memory speed to 6008Mhz when running compute software, but Fermi and Kepler run in P0 state which does not lower the memory speed. Once you get those explained I have many more you can explain.
     
    The amount you need to lower the memory speed varies from card to card and are you sure you are lowering the P2 memory speed and not the P0 memory speed. Below is an example of what my cards require. All of them are running 358.50 but they have been tested on all the drivers since 347.88 and all but 1 card do not get any Bad States on all the drivers.
     
    #1 EVGA GTX 980 Classified, Core Clock 1460Mhz, Memory 2948Mhz = 0 Bad states or slowdowns in the last 200+ WU's
    #2 EVGA GTX 980 Classified, Core Clock 1440Mhz, Memory 2930Mhz = 0 Bad states or slowdowns in the last 200+ WU's
    #3 EVGA GTX 980 Classified, Core Clock 1398Mhz, Memory 2601Mhz = 20 Bad states or slowdowns in the last 200+ WU's
     
    I can not run the above cards on Linux because they get too many bad states which was the same on Windows until I lowered the memory. The cards below have never had a Bad state and run on both Windows and Linux.
     
    #4 EVGA 770 Classified (Linux 346.96 driver) never had a bad state
    #5 MSI Lightning GTX 680 Windows never had a bad state
    #6 ASUS Matrix GTX680 (Linux 346.96 driver) never had a bad state
     
    The 2 cards below I am testing on Linux and I have had little success with getting rid of Bad states. But I do have hope I am working my way through drivers. It might help if some of you went to my post at the NVidia devolipers forum and added a comment or 2.  https://devtalk.nvidia.com/default/topic/888789/linux/problem-with-memory-speed-on-gtx-9xx-when-running-compute-software/  although it is on the third page now so they may not pay any attention to the request.
     
     
    #7 EVGA GTX 980 Ti Classified,  6 Bad states or slowdowns in the last 4 WU's
     
    #8 EVGA GTX 970 SC+ Hell I get so many bad states on this card I can not count them, I am damn lucky to get one to complete, I have got 2 WU's to complete today by installing the 358.09 Beta Linux driver and under clocking the card I have not had any Bad States since installing them but I have had allot of slow downs. I am currently at -125 on the core clock and working my way down. 
     
     
     
    post edited by Grandpa_01 - 2015/11/12 00:06:09
    #30
    Page: 12 > Showing page 1 of 2
    Jump to:
  • Back to Mobile