fatality38
New Member
- Total Posts : 30
- Reward points : 0
- Joined: 2016/06/05 18:02:43
- Status: offline
- Ribbons : 0
Re: 2016 Time Zone Challenge
2016/11/05 10:32:41
(permalink)
troy8d
11/5/2016
- We're nearing the halfway point of the contest and so far we've put up some incredibly impressive numbers as a team!
- The prize distribution process will begin next weekend, the weekend of November 12th.
- Please check the folding section of the forums for more information about the prize distribution at that time.
- You will have a week to select the prizes you prefer to win. You are responsible for checking the forums and following the process.
- Donations for individual prizes and the GPU Giveaway Pool remain open until the prize selection has begun. If you haven't donated already, you are encouraged to join the incredibly generous spirit this team has in giving back to the community! Donations of all shapes and sizes are appreciated.
I have a question, will you update in this thread with links to the section or we have to refresh until we find it?
|
Re: 2016 Time Zone Challenge
2016/11/05 10:48:50
(permalink)
fatality38
troy8d
11/5/2016- We're nearing the halfway point of the contest and so far we've put up some incredibly impressive numbers as a team!
- The prize distribution process will begin next weekend, the weekend of November 12th.
- Please check the folding section of the forums for more information about the prize distribution at that time.
- You will have a week to select the prizes you prefer to win. You are responsible for checking the forums and following the process.
- Donations for individual prizes and the GPU Giveaway Pool remain open until the prize selection has begun. If you haven't donated already, you are encouraged to join the incredibly generous spirit this team has in giving back to the community! Donations of all shapes and sizes are appreciated.
I have a question, will you update in this thread with links to the section or we have to refresh until we find it?
There is usually a second thread created for it. Just keep an eye out for it.
|
troy8d
CLASSIFIED Member
- Total Posts : 2185
- Reward points : 0
- Joined: 2010/10/16 08:10:22
- Status: offline
- Ribbons : 10
Re: 2016 Time Zone Challenge
2016/11/05 11:18:31
(permalink)
There will be a link posted here, and the first message in this thread. Additionally, there will be a separate thread that should be easy to find in the folding section with details.
|
Viper97
CLASSIFIED Member
- Total Posts : 4966
- Reward points : 0
- Joined: 2007/09/07 13:06:18
- Location: Hanging a Left at the next Right
- Status: offline
- Ribbons : 10
|
Re: 2016 Time Zone Challenge
2016/11/05 11:32:43
(permalink)
No! No! Not DOCTOR Who Can we pre order some of them from you?
post edited by bcavnaugh - 2016/11/05 19:29:51
|
HK-Steve
FTW Member
- Total Posts : 1027
- Reward points : 0
- Joined: 2015/04/06 08:46:57
- Location: Switzerland
- Status: online
- Ribbons : 0
Re: 2016 Time Zone Challenge
2016/11/05 11:36:58
(permalink)
NO, They should be limited edition.....
|
troy8d
CLASSIFIED Member
- Total Posts : 2185
- Reward points : 0
- Joined: 2010/10/16 08:10:22
- Status: offline
- Ribbons : 10
Re: 2016 Time Zone Challenge
2016/11/05 11:37:49
(permalink)
|
HK-Steve
FTW Member
- Total Posts : 1027
- Reward points : 0
- Joined: 2015/04/06 08:46:57
- Location: Switzerland
- Status: online
- Ribbons : 0
Re: 2016 Time Zone Challenge
2016/11/05 11:38:19
(permalink)
They look AWESOME Viper97........ Stunning work once again.. 
|
Re: 2016 Time Zone Challenge
2016/11/05 11:40:03
(permalink)
toyking22
the folding at home client is wrong about the ppd.. every time i look at it, it says 550-700k a day,, i go to the time zone challenge and its 800-850k ish any clues?
You Client will show you what you are currently running not what you have run and the PPD will change on the client each time you get a new WU/Project. The TZC is averaged out. No Two Tools will show you the Same PPD at the Same Time. Also the PPD Means nothing in the long run, it is the ending Points or Credits that count here.
post edited by bcavnaugh - 2016/11/05 11:42:16
|
Viper97
CLASSIFIED Member
- Total Posts : 4966
- Reward points : 0
- Joined: 2007/09/07 13:06:18
- Location: Hanging a Left at the next Right
- Status: offline
- Ribbons : 10
Re: 2016 Time Zone Challenge
2016/11/05 11:42:04
(permalink)
Limited to an edition of 6 mugs... just for the team. You guys always amaze me.
|
Re: 2016 Time Zone Challenge
2016/11/05 11:43:05
(permalink)
Viper97
Limited to an edition of 6 mugs... just for the team. You guys always amaze me.
Well That Really Sucks, now I cannot add to my Collection of your Great Mugs.
|
troy8d
CLASSIFIED Member
- Total Posts : 2185
- Reward points : 0
- Joined: 2010/10/16 08:10:22
- Status: offline
- Ribbons : 10
Re: 2016 Time Zone Challenge
2016/11/05 11:44:30
(permalink)
bcavnaugh
Well That Really Sucks, now I cannot add to my Collection of your Great Mugs.
Never say never...everyone has an equal shot at them.
|
Viper97
CLASSIFIED Member
- Total Posts : 4966
- Reward points : 0
- Joined: 2007/09/07 13:06:18
- Location: Hanging a Left at the next Right
- Status: offline
- Ribbons : 10
Re: 2016 Time Zone Challenge
2016/11/05 11:47:03
(permalink)
bcavnaugh
Viper97
Limited to an edition of 6 mugs... just for the team. You guys always amaze me.
Well That Really Sucks, now I cannot add to my Collection of your Great Mugs.
It's one per customer... so you have a chance my friend.
|
chrebean1
New Member
- Total Posts : 29
- Reward points : 0
- Joined: 2012/10/26 13:20:13
- Status: offline
- Ribbons : 0
Re: 2016 Time Zone Challenge
2016/11/05 11:47:52
(permalink)
Looks like folding client 7.4.15 (64-bit version) is working okay so far, with an AMD R7 360 card. I don't see a lot of production increase over the 32-bit 7.4.4 build, however. Anyone else seeing good results with the beta build?
I tried this beta out with twin nVidia 750ti's, but no such luck -- too many error messages.
Fold on ... Mountaineers!
|
troy8d
CLASSIFIED Member
- Total Posts : 2185
- Reward points : 0
- Joined: 2010/10/16 08:10:22
- Status: offline
- Ribbons : 10
Re: 2016 Time Zone Challenge
2016/11/05 12:06:42
(permalink)
Just finished our first Billion in November...
|
Re: 2016 Time Zone Challenge
2016/11/05 12:20:14
(permalink)
Those look awesome Viper97!!!!!...hope I win one
  "Kaos" ASUS RAMPAGE V EXTREME | Intel Core i7-5930K | Corsair H110i GTX | 2x EVGA 980TI Classified | HyperX 32GB (4 x 8GB) DDR4 3000 | Creative Zx | LG BH16NS40 | 2x SAMSUNG 840 EVO 250GB | Mushkin MKNSSDCR480GB | Seagate SSHD ST4000DX001 4TB | EVGA 220-P2-1200-X1 1200W | Corsair 780T | Win 8.1 64"BigDawg" Asus Maximus VI Formula | i7-4790k | Corsair H100i | 2x EVGA 970 SSC | Mushkin Redline 16GB 2400 | Pioneer BDR-2209 | Corsair GS 240GB | CORSAIR HX Series HX850 | Antec 1200 | Win 8.1 64
|
Re: 2016 Time Zone Challenge
2016/11/05 12:22:30
(permalink)
Heya notfordman, just a little tip.... Objects in your rear view mirror may be closer than they appear! !!!
"Kaos" ASUS RAMPAGE V EXTREME | Intel Core i7-5930K | Corsair H110i GTX | 2x EVGA 980TI Classified | HyperX 32GB (4 x 8GB) DDR4 3000 | Creative Zx | LG BH16NS40 | 2x SAMSUNG 840 EVO 250GB | Mushkin MKNSSDCR480GB | Seagate SSHD ST4000DX001 4TB | EVGA 220-P2-1200-X1 1200W | Corsair 780T | Win 8.1 64"BigDawg" Asus Maximus VI Formula | i7-4790k | Corsair H100i | 2x EVGA 970 SSC | Mushkin Redline 16GB 2400 | Pioneer BDR-2209 | Corsair GS 240GB | CORSAIR HX Series HX850 | Antec 1200 | Win 8.1 64
|
HK-Steve
FTW Member
- Total Posts : 1027
- Reward points : 0
- Joined: 2015/04/06 08:46:57
- Location: Switzerland
- Status: online
- Ribbons : 0
Re: 2016 Time Zone Challenge
2016/11/05 12:44:56
(permalink)
chrebean1
Looks like folding client 7.4.15 (64-bit version) is working okay so far, with an AMD R7 360 card. I don't see a lot of production increase over the 32-bit 7.4.4 build, however. Anyone else seeing good results with the beta build?
I tried this beta out with twin nVidia 750ti's, but no such luck -- too many error messages.
Fold on ... Mountaineers!
You have to set the slots manually for Cuda and openCL, to 0 and 1 for each GPU.. otherwise you will get errors.. -1 does not work, which is the automatic setup..
|
Re: 2016 Time Zone Challenge
2016/11/05 12:46:08
(permalink)
chrebean1
Looks like folding client 7.4.15 (64-bit version) is working okay so far, with an AMD R7 360 card. I don't see a lot of production increase over the 32-bit 7.4.4 build, however. Anyone else seeing good results with the beta build?
I tried this beta out with twin nVidia 750ti's, but no such luck -- too many error messages.
Fold on ... Mountaineers!
It is not going to make the PPD better or faster only more accurate in the estimating of the PPD. Core 21 Projects for the most are x64 anyway and even in the current 32Bit Client Core 21 Projects still run as x64. What Drivers are you using with your nVidia 750ti's cards?
post edited by bcavnaugh - 2016/11/05 12:48:46
|
Re: 2016 Time Zone Challenge
2016/11/05 12:46:40
(permalink)
HK-Steve
chrebean1
Looks like folding client 7.4.15 (64-bit version) is working okay so far, with an AMD R7 360 card. I don't see a lot of production increase over the 32-bit 7.4.4 build, however. Anyone else seeing good results with the beta build?
I tried this beta out with twin nVidia 750ti's, but no such luck -- too many error messages.
Fold on ... Mountaineers!
You have to set the slots manually for Cuda and openCL, to 0 and 1 for each GPU.. otherwise you will get errors.. -1 does not work, which is the automatic setup..
********** Reference ********** Beta Client V7.4.15 ********** Reference ********** Got It,  Thank You HK-Steve This is really funny for me because Bruce told me their was no fix for this. And the Above did Fix the errors listed below. *********************** Log Started 2016-10-07T18:31:06Z *********************** 18:31:06:ERROR:FS01:'opencl-index'=1 is in use by another folding slot but GPU 1 matches this device's PCI bus=3 and PCI slot=0, please correct this by removing any manually configured 'opencl-index' options. 18:31:06:ERROR:FS01:'cuda-index'=1 is in use by another folding slot but GPU 1 matches this device's PCI bus=3 and PCI slot=0, please correct this by removing any manually configured 'cuda-index' options. 18:31:27:ERROR:WU00:FS00:Exception: Server did not assign work unit ********** Reference ********** Beta Client V7.4.15 ********** Reference **********
post edited by bcavnaugh - 2016/11/05 13:09:04
Attached Image(s)
|
Enosoma
Superclocked Member
- Total Posts : 220
- Reward points : 0
- Joined: 2009/10/15 21:01:03
- Location: Pottstown, Pennsylvania
- Status: offline
- Ribbons : 2
Re: 2016 Time Zone Challenge
2016/11/05 13:04:18
(permalink)
Timpster-GPU_Nvidia_660Ti
For cooling power, instead of using an A/C, if it gets cool enough (with hopefully lower 60-70% humidity, sometimes not possible yet) then open two windows in your house (if your windows even open, most are now painted shut, because who the hell uses windows anymore?), and open one about 4 inches high, open one that is near your computer, and open another one across from it or on the opposite side of the house. Open that one much higher, and put a very large powerful fan in that one. This will be exhaust and it will completely force air to enter from the smaller open window.
It won't work miracles, but when it gets down to 70-65 or less, that's a good time to start this, and it works much faster than an A/C unit. A good fan choice would be a 20"+ metal fan, do NOT use a cheap plastic fan as metal is way easier to clean, and we all know what heatsinks are made of! Also, those "box fans" (also still use a metal fan here) would work a lot better in a window, and you'll want to close off the sides so most of the air comes through the fan.
I hope you all find this helpful, and use it where and when possible. Let me know your results!
 
post edited by Enosoma - 2016/11/05 13:11:34
 
|
HK-Steve
FTW Member
- Total Posts : 1027
- Reward points : 0
- Joined: 2015/04/06 08:46:57
- Location: Switzerland
- Status: online
- Ribbons : 0
Re: 2016 Time Zone Challenge
2016/11/05 13:19:29
(permalink)
bcavnaugh
HK-Steve
chrebean1
Looks like folding client 7.4.15 (64-bit version) is working okay so far, with an AMD R7 360 card. I don't see a lot of production increase over the 32-bit 7.4.4 build, however. Anyone else seeing good results with the beta build?
I tried this beta out with twin nVidia 750ti's, but no such luck -- too many error messages.
Fold on ... Mountaineers!
You have to set the slots manually for Cuda and openCL, to 0 and 1 for each GPU.. otherwise you will get errors.. -1 does not work, which is the automatic setup..
********** Reference ********** Beta Client V7.4.15 ********** Reference **********
Got It,
Thank You HK-Steve
This is really funny for me because Bruce told me their was no fix for this. And the Above did Fix the errors listed below.
*********************** Log Started 2016-10-07T18:31:06Z ***********************
18:31:06:ERROR:FS01:'opencl-index'=1 is in use by another folding slot but GPU 1 matches this device's PCI bus=3 and PCI slot=0, please correct this by removing any manually configured 'opencl-index' options.
18:31:06:ERROR:FS01:'cuda-index'=1 is in use by another folding slot but GPU 1 matches this device's PCI bus=3 and PCI slot=0, please correct this by removing any manually configured 'cuda-index' options.
18:31:27:ERROR:WU00:FS00:Exception: Server did not assign work unit
********** Reference ********** Beta Client V7.4.15 ********** Reference **********
Set each GPU to the same 0 for Cuda and openCl for the first GPU, then 1 for the second GPU the 2 for the third gpu....
 
|
Re: 2016 Time Zone Challenge
2016/11/05 13:27:28
(permalink)
|
Re: 2016 Time Zone Challenge
2016/11/05 13:49:44
(permalink)
I messed up on donation part. Just wanted to throw in 20 bucks point me in right direction and delete my post.
|
Re: 2016 Time Zone Challenge
2016/11/05 13:51:13
(permalink)
|
Enosoma
Superclocked Member
- Total Posts : 220
- Reward points : 0
- Joined: 2009/10/15 21:01:03
- Location: Pottstown, Pennsylvania
- Status: offline
- Ribbons : 2
Re: 2016 Time Zone Challenge
2016/11/05 14:59:59
(permalink)
Viper97
Speaking of prizes... here's the results of my work. Hope it lives up to the glory you all are creating!
Awesome mugs, man. Thank you for your effort! I love Bill & Ted!... oh... wait...
|
Re: 2016 Time Zone Challenge
2016/11/05 15:40:28
(permalink)
Cool mugs. Thanks again for making them and donating them. 
|
Re: 2016 Time Zone Challenge
2016/11/05 16:34:20
(permalink)
Enosoma
Viper97
Speaking of prizes... here's the results of my work. Hope it lives up to the glory you all are creating!
Awesome mugs, man. Thank you for your effort! I love Bill & Ted!... oh... wait...
I thought it was the DOCTOR Who's Phone Both.
post edited by bcavnaugh - 2016/11/05 19:31:14
|
Enosoma
Superclocked Member
- Total Posts : 220
- Reward points : 0
- Joined: 2009/10/15 21:01:03
- Location: Pottstown, Pennsylvania
- Status: offline
- Ribbons : 2
Re: 2016 Time Zone Challenge
2016/11/05 16:41:54
(permalink)
bcavnaugh
I thought it was the Dr. Who Phone Both.
It is. I was joking 
|
MikeMcLarenF1
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2010/11/07 16:23:52
- Status: offline
- Ribbons : 0
Re: 2016 Time Zone Challenge
2016/11/05 16:50:19
(permalink)
Ah shucks. I just read the invite to this challenge. Too late to join?
|
