caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Here is a small taste of what I have in store for the SR2 170mL Resevoir MCP255 Pumps Modified Black Ice GTX II Xtreme 360 Radiators Apogee XT Compression fittings Quick disconnects L & T connectors FANS for Push\Pull KDE 1212 PMS3-6A: 2300 rpm @ 83 cfm ~ 34dBA /0.26 amps/ 3.2 watts/ brg. type - sleeve/ 0.18 (inch~H2O)
post edited by caguerrero - 2010/04/23 22:06:53
|
xeonite
Superclocked Member
- Total Posts : 221
- Reward points : 0
- Joined: 2010/04/06 18:57:27
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/24 12:50:48
(permalink)
Looks very nice! :D Now you just need the board. What cpu's are you planning on buying and what case too?
Rig: ASUS P6T6 WS Revolution - i7 920 (C0) @ 3,8 Ghz - 6 Gb Corsair DDR3-1600 - GTX 285 Upcoming Rig: EVGA SR-2 - Dual X5650s @ ~ 4 Ghz - 24 Gb G.Skill DDR3-2000 - 2x GTX 460 FTW
|
sinsear
CLASSIFIED Member
- Total Posts : 2049
- Reward points : 0
- Joined: 2008/11/30 21:52:07
- Location: Colorado
- Status: offline
- Ribbons : 4
Re:1K+ H20 cooling for SR2
2010/04/25 10:06:10
(permalink)
That's a lot of fittings....
Main Rig: Intel i7 920 [C0] @ 3.82Ghz | EVGA X58 [759] Classified (64) | MM Extended Ascension w/ Pedestal | Corsair HX1050 24GB Patriot Viper II ‘Sector 7’ 2000mhz (9-11-9-27) @ 1.65v | 2x EVGA GTX480 (875/2000 @1.1v) | CPU, GPUs and Mobo on H2O Dedicated Folding Rig: ~In Progress~ Intel i7 3770K | EVGA Panther Point Mobo | Corsair AX650 | 8GB Corsair Vengeance 2000mhz (10-10-10-27) @ 1.5v
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/26 08:41:27
(permalink)
I bought the MM case, Extended Ascension w/ pedestal (anodized black) and a pair of xeon 5620's
post edited by caguerrero - 2010/04/26 20:14:46
|
DraginElite
CLASSIFIED Member
- Total Posts : 4394
- Reward points : 0
- Joined: 2008/05/01 18:47:28
- Location: My Own Little Corner
- Status: offline
- Ribbons : 17
Re:1K+ H20 cooling for SR2
2010/04/26 08:47:51
(permalink)
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/26 10:28:46
(permalink)
yeah, sorry 5620's hard to type while driving sometimes.
|
kelemvor
iCX Member
- Total Posts : 331
- Reward points : 0
- Joined: 2006/05/21 13:55:22
- Location: Largo, FL
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/26 10:43:37
(permalink)
What's the modification you did to the pumps?
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/26 10:56:00
(permalink)
You can get different tops to increase performance Manufacturer: XSPC Material: High Quality Acetal Threading: G1/4" Thread Description: Acrylic top for Laing DDC-3.2 and DDC-3.1 pumps. Comes complete with two LED holes and mounting screws. Check out Performance Comparisons at Martin's Liquid Lab (mirror).
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/29 12:05:25
(permalink)
added MM Ext Ascention with accessories / (Ped on the way) 2x Xeon 5620 2x Kase master pro fan controllers Pioneer Blu Ray Burner caguerrero Here is a small taste of what I have in store for the SR2 170mL Resevoir MCP255 Pumps Modified Black Ice GTX II Xtreme 360 Radiators Apogee XT Compression fittings Quick disconnects L & T connectors FANS for Push\Pull KDE 1212 PMS3-6A: 2300 rpm @ 83 cfm ~ 34dBA /0.26 amps/ 3.2 watts/ brg. type - sleeve/ 0.18 (inch~H2O)
|
Squat500
FTW Member
- Total Posts : 1171
- Reward points : 0
- Joined: 2009/04/25 13:09:38
- Status: offline
- Ribbons : 2
Re:1K+ H20 cooling for SR2
2010/04/29 19:55:11
(permalink)
Wow, already building and expensive box with expensive cooling for something that has yet to have a release date. That would be like building a computer 5 years ago in anticipation for Starcraft II... JK, but what will you throw in that awesome conglomeration until you get your desired parts? (Hint hint, use a 7 year old HP and move it into this, just to mess with people. )
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/29 20:25:04
(permalink)
|
epicfeltonj
New Member
- Total Posts : 93
- Reward points : 0
- Joined: 2010/04/12 11:43:34
- Status: offline
- Ribbons : 1
Re:1K+ H20 cooling for SR2
2010/04/29 20:31:03
(permalink)
I have the Acer monitors they are nice but the Alienwares 3d monitor looks sooooooo much cleaner!
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/29 20:54:57
(permalink)
I was considering them, but a review steered me the other way. have you seen both in person?
|
epicfeltonj
New Member
- Total Posts : 93
- Reward points : 0
- Joined: 2010/04/12 11:43:34
- Status: offline
- Ribbons : 1
Re:1K+ H20 cooling for SR2
2010/04/29 21:01:01
(permalink)
I have, performance wise they both seem the same, the Dell seems to display better colors though, and for the Acers be prepared for the old non glossy display, if Acer would have used a glossy display like the old G series this monitor would have been better. Dont get me wrong I love them but I am just saying if you are going to spend the money the Dell is just the best choice!
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/30 09:07:39
(permalink)
I also have to pick out a boot drive SSD, im still on the fence about that though. following anandtech site for reviews - since he seems to know the 411
|
epicfeltonj
New Member
- Total Posts : 93
- Reward points : 0
- Joined: 2010/04/12 11:43:34
- Status: offline
- Ribbons : 1
Re:1K+ H20 cooling for SR2
2010/04/30 09:17:50
(permalink)
Sorry but for the SSD's I went with Crucials Sata 3 drives, check out the reviews they dominate Intel's ssd's. I have two in raid 0 and they are amazing!
|
Visard
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2010/04/03 06:12:20
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/30 09:27:23
(permalink)
SSD: for OS+Prog I propose 2 x OCZ Vertex2 in raid0 => ~500GBs R/W and I/O's up to 50k (4kB)... I'm today running 2 x OCZ LE 100GB (raid0) + 6 x OCZ Vertex (raid0/LSI) as scratch disk (cpu I7-420). What I looking in to today is witch HDD ? 1 - Seagate Cheetah 15K.7 2 - WD Velociraptor 600GB 10K 3 - WD Caviar Black 1TB/64MB Sata600 I'm sure I will put them in raid 0/10/5...
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/04/30 12:29:09
(permalink)
epicfeltonj I have, performance wise they both seem the same, the Dell seems to display better colors though, and for the Acers be prepared for the old non glossy display, if Acer would have used a glossy display like the old G series this monitor would have been better. Dont get me wrong I love them but I am just saying if you are going to spend the money the Dell is just the best choice! well, i ended up changing my mind - i switched to the AW and cancelled my order for the acers - should have the dell models in next week. what about TRIM in RAID 0 ? I though you couldnt do both yet.
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/01 08:09:55
(permalink)
going to pull the trigga on OCZ vertex2 200GB There are no raid controllers that support TRIM so i'm just sticking with 1 drive for now until TRIM is supported in RAID. I would not want to unraid just to trim and then restore every time it started to slow down. vertex2 review is up on anandtech
post edited by caguerrero - 2010/05/01 08:15:20
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 11233
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:1K+ H20 cooling for SR2
2010/05/03 11:12:41
(permalink)
But what about a full coverage chipset block ;)
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/03 18:27:50
(permalink)
well, chances are if its nice and offers some kind of performance I would consider it. Im giving evga till june 1 to spit the board out, then i'm going to practice some voodoo on them. tracking says MM pedestal should be here friday 5/7 , 5/10 on my dell order (3d monitors), newegg SDD order just says shipped with 3 day ups. Here is my unofficial theory , newegg has the power supply coming in supply by june 1, so that must mean the MB has to be ready by then too.
|
stephan-as-ice
Superclocked Member
- Total Posts : 181
- Reward points : 0
- Joined: 2010/02/20 04:55:27
- Location: Germany
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/05 11:39:56
(permalink)
next time frame to release is estimated early june if that's true
EVGA Classified SR-2 (A56)--- 2x EVGA GTX Titan ---2x Xeon 5650 ---2x Crucial M4 ---96GB Kingston Reg 1600 CL11 --- Corsair AX1200i 1200W --- LianLi AX75 --- MO-RA 3Pro --- all @ full water --- NEC PA271W + Dell U2711 EVGA Classified SR-2 (A56)--- 1x EVGA GTX 680 ---2x Xeon 5650 ---1x Crucial M500 ---48GB Kingston Reg 1600 CL11 --- Corsair AX860i 860W --- LianLi AX75 --- MO-RA 3Pro --- all @ full water
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/05 18:18:38
(permalink)
yea... look what came in today..
|
stephan-as-ice
Superclocked Member
- Total Posts : 181
- Reward points : 0
- Joined: 2010/02/20 04:55:27
- Location: Germany
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/06 02:10:38
(permalink)
OMG let's see how your OCZ drives along with my Crucial RealSDD
EVGA Classified SR-2 (A56)--- 2x EVGA GTX Titan ---2x Xeon 5650 ---2x Crucial M4 ---96GB Kingston Reg 1600 CL11 --- Corsair AX1200i 1200W --- LianLi AX75 --- MO-RA 3Pro --- all @ full water --- NEC PA271W + Dell U2711 EVGA Classified SR-2 (A56)--- 1x EVGA GTX 680 ---2x Xeon 5650 ---1x Crucial M500 ---48GB Kingston Reg 1600 CL11 --- Corsair AX860i 860W --- LianLi AX75 --- MO-RA 3Pro --- all @ full water
|
xeonite
Superclocked Member
- Total Posts : 221
- Reward points : 0
- Joined: 2010/04/06 18:57:27
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/06 02:12:06
(permalink)
Nice package. SSD + Ram. Sweet
Rig: ASUS P6T6 WS Revolution - i7 920 (C0) @ 3,8 Ghz - 6 Gb Corsair DDR3-1600 - GTX 285 Upcoming Rig: EVGA SR-2 - Dual X5650s @ ~ 4 Ghz - 24 Gb G.Skill DDR3-2000 - 2x GTX 460 FTW
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/06 13:57:17
(permalink)
yes, 1 day early-- nice
|
xeonite
Superclocked Member
- Total Posts : 221
- Reward points : 0
- Joined: 2010/04/06 18:57:27
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/06 14:17:28
(permalink)
Wow it that your three screens?? Nice. Tell me what you think of the vertex 2 ssd? (when you get a chance to check it out). Im into buying a new ssd and ponder either the vertex 2, the crucial realSSD C300 or the corsair nova. At present both my desktop + laptop run with corsair p128. Which is nice. But these newer SSDs seem to offer even more bang!
Rig: ASUS P6T6 WS Revolution - i7 920 (C0) @ 3,8 Ghz - 6 Gb Corsair DDR3-1600 - GTX 285 Upcoming Rig: EVGA SR-2 - Dual X5650s @ ~ 4 Ghz - 24 Gb G.Skill DDR3-2000 - 2x GTX 460 FTW
|
threedhero
iCX Member
- Total Posts : 356
- Reward points : 0
- Joined: 2008/11/09 09:30:15
- Status: offline
- Ribbons : 2
Re:1K+ H20 cooling for SR2
2010/05/06 15:45:54
(permalink)
Wow 1k+ in watercooling should have should looked into chiller cooling
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/06 16:24:11
(permalink)
There is always room for more,
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:1K+ H20 cooling for SR2
2010/05/06 20:53:53
(permalink)
|